Our Bachelor´s Thesis has been performed in co-operation with Bors Automation & Tool AB.Our task was to develop a servomotor powered tube cutting-machine with initial point fromtoday's hydraulic driven tube cutting machine Bors HYD 23. The purpose with the newconstruction was to achieve a more power-efficient tube cutting machine which could lowerthe power consumption, and also meet the market continued growing demand forenvironmental-conscious production.Bors Automation & Tool gave us relatively free hands in order to enable new thinking ideaswithout following their traditional constructional solutions.Our solution resulted in a construction based on a power source existing of a servomotordrivenrollerscrew, witch provides a more rational use of energy compared with the currentmethod.Bors Automation & Tool AB has decided to fabricate a prototype of Bors E 23 during theautumn of 2007, which they are planning to revile at the Tube 2008 exhibition in Düsseldorf,Germany.NOTE:Due to an agreement signed by the authors in the beginning of this project, no appendix is published at this time.If you want to wiew these documents, please contact the authors..

Abstract This study is an evaluation of a development project, seeking to work for entrepreneurial learning, starting from John Hattie's findings on the significant factors for visible learning. The study is based on action research a method together with a questionnaire, focused interviews and observation, by the issue of How do students perceive entrepreneurial learning? The results show that the methodology contributes to a more active learning and greater work satisfaction among students. The results also reinforce the thesis of the formative assessment and the importance of reflection for increased metacognition. The work identifies the project's educational shortcomings and strengths, and lays the foundation for further development towards full implementation of entrepreneurial learning in a secondary activity that works to prepare students with special needs for the labor market..

At the Division of Electricity at Uppsala University there is an experimental rig forhydroelectric generators. The experimental rig?s vital part is a 12-pole synchronousmachine, whose electrical characterizing parameters (resistances, inductances andtime constants) are unknown. The aim of this thesis is to characterize the machine inits current state by perform a Standstill Frequency Response (SSFR) test. From theanalysis of the measurement data, which is a part of the test, a set of basic parametershave been received.

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde spring 2007, together with Jede AB in Mariestad. The report covers the development of a door to a coffee vending machine that is under construction, and will in a chronological order describe the project from ideas to final product.The project started with a rather extensive feasibility study that thru market research and user tests sorted out the opinions of potential customers, concerning today?s available assortment. Technical areas concerning materials and manufacturing methods were also scrutinized for the consideration of the possibilities of a future production.The next step was to constructively generate ideas and thoughts that later on could grow to be potential solutions. After several weeks of hard work and pieces of good advice and recommendations from the assigner, four comprehensive concepts were built up.

In this study we aim to investigate what employees at a callcenter see as prospects, opportunities and barriers of learning within a company. To answer the purpose of this essay, two questions were formulated; "What opportunities for learning does employees experience in the company?" and "How can learning in the workplace improve for the sellers?". First, we present what previous research has highlighted regarding workplace learning and learning within the callcenter industry. Afterwards we present ten semi-structured interviews with leaders and sellers within a telecom company in Stockholm.

The aim of this study was to analyze the assessment of the primary school, from the teacher?s perspective. There has been an ongoing discussion regarding assessment and about the purposes of assessment for a long time. But there is a paucity of research on what teachers believe about. This study examined primary teachers? beliefs on major purposes of assessment.Assessment is the process of gathering and interpreting information about students? learning.

Most studies on parenthood and learning difficulties focus on mother and child, and very little is know about fathers with learning difficulties. Moreover, people with learning difficulties are rarely asked to tell their own narratives. The aim of the current study is to identify the role of the father in families where one or both of the parents have learning difficulties. Laws and regulations concerning the rights of people with learning difficulties in Sweden are accounted for and the he social support system for all parents in Sweden are described .The empirical study is a qualitative phenomenological interview study, inspired by narrative traditions, and describes how fathers with learning difficulties experience these support systems. The main data are two life stories of fathers with learning difficulties and one observation in a family.The findings suggest that although Sweden has a highly regarded disability policy and social support system, and even though fathers with learning difficulties are assured equal rights as members of the society and as parents by the Act of Human Rights, they are not treated equal but still faces structural inequalities.

The aim of this study was to explore how young students can be taught during their first year of learning English towards the A1 level according to The European Framework of Reference for Languages, and how the students understand their own learning. The study was carried out in two different classes but with the same teacher, who is qualified to teach English to young learners. The result is based on the analysis of a total of twelve observations of English lessons in two classes in school year one and eight group interviews with the students. Recurrent ingredients through all lessons were activities such as listening to teacher talk, watching films or film clips, singing songs and doing rhymes, using drama activities, talking about the meaning of learning English, practicing guessing competence and learning new vocabulary. The teacher consistently talked about and taught different strategies for language learning.

This paper aims to study the Armenakis´ theory of readiness, "are they ready?", which consists of five key components affecting the outcome of an organizational change. In this case study, the intention is to investigate if any component is important; alternatively if it is possible to discern a pattern between components, i.e. how they correspond to each other. During the past 30 years have a research group lead by Armenakis has studied organizational change and how resistance to change can be avoided by preparing employees in the introductory phase of change. The main object for Armenakis is the question "what determines whether the employees (change recipients) adopt and support, or reject and resist a change".

The aim of this study is to describe how Swedish research librarians feel that their work has been affected by electronic journals. The study focuses on medical electronic journals accessed through consortia agreements via Bibsam, the Royal Librarys Department for National Co-ordination and Development. This thesis includes two main parts: a literature survey and an empirical study. The literature survey shows that since the 1990´s most research libraries are hybrid libraries including both printed and electronic information sources and that librarians tasks to seek and organize information have remained but the tools have changed. Qualitative interviews were performed with four librarians at two university libraries and one university college library on how their work with electronic journals differed from their work with printed journals, which new tasks the electronic journals have brought and which have disappeared and how the librarians professional role has been affected.

The overall goal of this diploma work is to produce a design of a 5 GHz radio frontend using Agilent Advanced Design System (ADS) and then build a working prototype. Using this prototype to determine if RF circuits at 5 GHz can be successfully produced using distributed components on a laminate substrate. The design process for the radio front-end consists of two stages. In the first stage the distributed components are designed and simulated, and in the second stage all components are merged into a PCB. This PCB is then manufactured and assembled.

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.

Purpose: The purpose with this study is to analyze if the Swedish authorities and media had different ways of discussing the new influenza, in connection with the pandemic classification June 11, 2009. This is the first time an influenza has been classified as a pandemic since the Hongkong-influenza in1968. Methodology: The method used for the study is discourse analysis, aqualitative method that gives the opportunity to study not only what is said, but how things are said. In this thesis, the aim is to study how the image ofthe new influenza is transmitted via the texts. The texts have been analysed based on:- General and underlying themes- Words and concepts used- Persons/sources quoted or referred to- Historical connections/historical backgroundTheoretical perspectives: The study is based on theories about socialconstructionism and discourse analysis.

Practical and theoretical learning are methods that are used in schools as a way to prepare students for the working life. Within the practical learning knowledge is not only acquired to learn in practice, but the students must also be able to apply their theoretical knowledge to what he/she does. Against this background, the aim of the study was to investigate the importance of practical learning for students in college / university level and how they are experiencing the stress that may arise out of the loss of practical learning during their education, as well as their vision for working life after completing their education. The population of the study consisted of N = 36, which 18 of these had used both practical and theoretical learning and the remainder had only used theoretical learning. The method was a questionnaire survey with a high proportion of fixed alternative answers according to likert scales.

Forest ebeaver is, equipped as a bio-energy harvester, approximately four and a half meter long and weigh just over two tons. The main purpose of this report is to find out whether a small machine like Forest ebeaver can be profitable used in early thinning. To find this out a study has been made using the machine to thin in a young pine stand..