This thesis has been performed as a part of the Bachelor degree in Industrial Engineering and Management at the School of Engineering in Jönköping. The thesis is written on behalf of Pallco AB, which is an engineering company that performs subcontracting, surface treatment, and assembly of components, mainly in steel and aluminium. The thesis focuses on identifying and analyzing the customer order fulfillment process of three customers at Pallco AB.The main objective of the thesis is to distinguish time differences in the company?s administrative work for each of the three customers. Furthermore, Lean thinking is following as a thread through the whole thesis.

Bakgrund: Den intensivvårdskrävande patienten är många gånger i behov av transport utanför intensivvårdsavdelningen för diagnostiserande undersökning eller behandling. Transporten är riskfylld då patienten kräver komplicerad utrustning och avancerad medicinsk behandling. Studier visar att patientsäkerheten ökar om policydokument används vid transportprocessen.Syfte: Studiens syfte var att kartlägga antalet policydokument som reglerar intrahospital transport i Stockholms län och jämföra dem med en guideline.Metod: Urvalet bestod av policydokument från 11 intensivvårdsavdelningar i Stockholms län. Metoden utgjordes av deskriptiv dokumentinnehållsanalys.Resultat: Sex av elva intensivvårdsavdelningar i Stockholms län hade policydokument som reglerar intrahospital transport. Policydokumenten hade fem gemensamma huvudämnen: Riskbedömning, bemanning, förberedelse, övervakning och utrustning vilka överensstämde med dem i guidelinen.

Individual cellulose ?bers were studied to identify the transport and absorbtion phenomena as well as the in?uence of drying. A Chalmers University of Technologydeveloped method within ESEM (Enviromental Scanning Electron Microscope) has been used in this study. The results from the laborations gave the following conclu-sions: The transport of water occurs in ?bers in the ?ber wall surface and the lumen.

The aim of this study is to examine if the leadership style in Faiveley Transport Nordic Ltd has an impact on the psychosocial climate in the workplace. Henceforth, we have checked if the psychosocial climate influences the feeling of satisfaction that exists in the organization and if this in turn influences the degree of extra effort the employee chooses to impose on his or her task. In order to measure the leadership in the organization we have used the Multifactor Leadership Questionnaire (MLQ). The climate, in turn, has been measured through Ekvalls GEFA. All 125 employees in Faiveley Transport Nordic Ltd got the possibility to attend the survey, 58 participated.

This thesis explores the possibilities of avoiding the issues generally associated with compression of noisy imagery, through the usage of vector quantization. By utilizing the learning aspects of vector quantization, image processing operations such as noise reduction could be implemented in a straightforward way. Several techniques are presented and evaluated. A direct comparison shows that for noisy imagery, vector quantization, in spite of it's simplicity, has clear advantages over MPEG-4 encoding..

Habitat selection of migratory brown trout at the upper reaches of River Vindelälven, wasstudied in September during the pre-spawning period. The fish migrate from down- orupriver lakes for spawning in the river and data was collected by habitat mapping andradio-telemetry. Habitat selection of fish was analysed with preference curves andstatistical modelling, using the physical variables; depth, stream velocity and streambedsubstrate. Preference curves were derived by comparing fish habitat use with their nearbyavailable environment while the statistical modelling aimed to answer three main questions.1) Do the trout have a specific preference of depth, water velocity and streambed substrate?2) Is there any difference in habitat selection between sexes? 3) Is there a shift in habitatselection over time? The preference curves indicated that trout favored water depths of 1-2m, velocity compositions characterized as glides (c.

Cannibalism can have major influence on fish population dynamics. A prerequisite for cannibalism is that the cannibal and the potential victim meet, and besides density effects, the encounter rate between cannibals and their victims is therefore also largely dependent on habitat use and habitat heterogeneity. In this study I quantified and compared the potential for cannibalism in stream-dwelling European grayling populations in three rivers in Jämtland by means of habitat classifications. I also analyzed population dynamic consequences of varying the potential for cannibalism in terms of intensity, using a physiological structured population model. Findings based on habitat characteristics were that the potential for cannibalism is in general not favourable in these types of streams.

Building with volume element is relatively new and has started to increase more and more. The regulations that exist to regulate and determine how the transports of volume elements are to be conducted are diffuse and not very well adjusted to address the issues with transporting volume elements. Today there are a number of instances that a company has to turn to in order to get a somewhat different view, what regulations say and interpret it in order to know what applies and not applies regarding the transportation of volume elements. regulations. The rules that are in place make it tough for the volume element producing companies to develop and continue to be active on the market.

Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

This work covers a broad analysis of the risks that could impact the achievement of electrical safety of electrical installations. The work includes both electrical equipment such as the installation of electrical equipment.The report illustrates the main technical characteristics of electrical connections greater than 10 mm2 and provides an introduction to the crimping systems for copper and aluminum conductors. In addition to that analyzes the factors that are important to assure the quality of an electrical connection throughout the value stream in terms of both materials such informations. Furthermore analyzed deeper the need for skills development of technicians and other staff.The different parts of this work are analyzed and presented, in theory to studies carried out both at Elpress AB and partly with the help of other scientific reports dealing with similar subjects. In addition, presents a survey that will help understanding the current perception of the electrical connections and cable crimping systems among end users.

This paper is about how transport companies in the future will be able to adapt their activity to an environmentally sustainable development without the effect of negative company economic consequences. Today, the environmental threat is a global problem and knowledge about that effluent of carbon dioxide have a negative impact on the climate is generally known. A transport system that works well is important for Sweden, but the sector has a negative impact on the environment. Regulation and legislation for increased environmental requirements often meets resistance and fear that the work will be hampered by increased costs for environmental work that can lead to an international decrease in competitiveness. The transport companies have outside pressure from the society to do something about the environmental issue, however the companies? customers are not ready to pay a higher price for environmental work.

This report discusses questions concerning wear on forest roads. The purpose of the work is to investigate if the wear on the roads will decrease when the speed limit gets lower for the trucks that transport the wood. A normal forest road, class B, was used in the study. In total 5000 m3f timber was transported on the road. Data about the road was measured with a profilograph car before and after the timber transport.

The goal of this project was to implement and compare Invere Discrete Cosine Transform using three methods i.e. by bit parallel, digit serial and bit serial. This application describes a one dimensional Discrete Cosine Transform by bit prallel method and has been implemented by 0.35 ìm technology. When implementing a design, there are several considerations like word length etc. were taken into account.

The aim of this project was to develop a numerical model simulating the global transport of air pollution. The model currently used by SMHI, the Swedish Meteorological and Hydrological Institute, was intended to perform such simulations at regional scales. However, the usage of a grid based on longitudes and latitudes makes this model work poorly in global simulations. The problem with this grid is that the nodes are concentrated near the North and South Poles. Due to this characteristic, the Courant, Friedrich and Lewy-condition for numerical stability puts a sharp bound on the timestep length.

Handling, loading, transport time and unloading in connection to transport of farm animals affect animal welfare. Induced effects include both psychological and physiological stress responses in animals. The physiological parameters may be measured through blood analysis while behavioural changes often manifest themselves through increased vocalisation, escape attempts and apathy. Physiological parameters are additional parameters of importance when measuring animal stress responses. The handlers behavior during transport has been shown to have major impact on animal welfare and the quality of meat. Animal friendly handling and driving of animals create a more manageable work environment for the handlers. To further increase animal welfare in connection to transport, stables should be built with well adapted drift passage and ramps on the transport vehicle.