This master thesis was a subtask of a project called EMIR-1. The goal with the thesis was tobuild a system for particulate mass measurements in one of the engine test cells at KTH. Theparticulate mass measurements are planned to be measured with a TEOM.The exhaust gases must first be diluted with air before the sample is sent to the TEOM.Therefore an ejector diluter for this matter also was designed and evaluated in the thesis.Emissions measurements have been done both with and without dilution to determine thedilution ratio. Tests have been done for different speeds and loads.Problems with stability of the dilution ratio have been an issue throughout the process andpressure pulsations in the exhaust pipe are believed to be the cause. More tests have to be done tomake sure that this is the problem.One idea is to make the inner diameter of the diluter nozzle smaller and see if it changes thedilution ratio stability.

This thesis describes the process of developing a reservation system for common resources through a TV-interface. The system is developed in cooperation with the company Dreampark and is built to work in their platform for TV, Dreamgallery. The main goal was to develop a reservation system and to make it work with Dreamgallery, to develop a demonstration version of the system. The thesis describes the approach for developing an easy-to-use and customisable program and interface for making reservations. How this is inserted into an existing program in a suitable way.

This bachelor?s degree thesis was conducted in mechanical engineering at Halmstad University during spring semester 2010 in close collaboration with the company Gremo AB, located in Ätran, Sweden. Gremo AB produces, developes and sales forest machines in both Sweden and on the international market.Gremo AB belongs to one of the market leaders in forest industry, especially with their forwarder. In order to become a market leader even with their harvester, the company decided to change the harvester to have a swivel and a leveling driver cabin.The aim with this bachelor?s degree thesis was to develop a design concept for the harvester driver cabin, which Gremo AB can apply on the new harvester.

The purpose of this thesis is to examine how social procurement can be a further development of public-private partnership. This is done with interviews and a case study of the social procurement Mitt Gröna Kvarter and its labor effort Boendebyggarna. The theoretical framework used in the thesis consists of public-private partnership and corporate social responsibility. It tries to answer the following questions:What does this social procurement mean by the concept of public-private partnership?What does this social procurement mean for the participants involved?How can social procurement be seen as a further development of public-private partnership?The thesis uses the theory development around the concepts of public-private partnership and corporate social responsibility and shows that social procurement does indeed have similarities to public-private partnership and could very well be a further development of it..

The master thesis has been constructed together with Scania, who had a wish to develop their training for newly employed design engineers. The purpose of this thesis is to examine how a company's introduction process can be shaped, as the introduction is the key to success for the individual as well as the organization. With a focus on how the productivity among newly employees can increase and how the introduction becomes meaningful to the individuals and the organization, the objective of this work is to develop concepts applicable for an introduction.The work was conducted using qualitative interviews with several different individuals at Scania and other companies. Along with the interviews a survey was constructed and sent out to newly employed design engineers at Scania to get a view of their opinions on the present training. During the first period of a job there are several factors that affect the employee based on the result from the interviews, previous research and theories.

The purpose of this thesis is to deepen the understanding of our contemporary description of digital literacy using the perspective on knowledge from the Nicomachean Ethics by Aristotle. I have chosen to deal with the problem using a hermeneutic approach. The method of inquiry is based on close reading of the selected literature. The selection itself has been made after a strategic selection regarding perspective on knowledge and digital literacy. It appears in the thesis that there are substantial differences but also similarities between our contemporary description of digital literacy from Recommendation of the European Parliament and of the Council of 18 December 2006 on key competences for lifelong learning and the perspective on knowledge from the Nicomachean Ethics by Aristotle.Still, the result has been possible to use for the purpose of the thesis since the problem has an answer and a deepened impression of the understandings of digital literacy..

This thesis consists of three parts: one normative, one empirical and one constructive, with the intention to explore the enforcement of accountability in megaprojects.The thesis aims to evaluate the level of accountability in the policy process of the European Spallation Source, ESS between 1990 and 2008. In order to make a comparison possible, a norm is created concerning how a policy process should be designed, with primary focus on openness and participation, to make enforcement of accountability possible. The policy process of the ESS is compared with this norm with the purpose of discovering whether the process contains elements that assure enforcement of accountability. After the comparison is done, it is possible to formulate constructive proposals about how the enforcement of accountability can be improved.The thesis also explores how networks, consisting of actors with particular resources, surrounding the ESS-project affects the form of the policy process, e.g. in shaping the social construction of the aim and purpose of the project.

In this thesis you will be able tofollow the design work of a drumtest. A tool that by having a rotatingdrum with equally positioned obstacleswill simulate the conditions a mountainbike rim will pass through.Initially there is a specification ofsome parameters and requirements thatthe design had to fulfill. There is alsosome brief background information aboutwhy a drum test is required for abicycle rim manufacturers and about thecompany Innolite Design AB that thisthesis is done for. After that itfollows an extract from conceptgeneration with the chosen concepts andsolutions but also some of the conceptsthat were not chosen.The thesis also contain a part where thereader cangain a deeper understanding of how thedesign works as well as some moredetailed facts about how the choice ofmaterials, their thicknesses, etc. havebeen made.

This report is the result of a thesis work done at the Department of Engineering Sciences, Uppsala University, and includes 15 ECTS points. The work has been performed at Företag A, a company specializing in electronics whose major product has become a sophisticated tool used by authorities across northern Europe. Företag A has initiated a quality management system according to the criteria set by ISO 9001. Following demands from customers, Company A has now decided to also start working towards a certification according to SS-EN ISO 9001:2008, this work is the foundation for the thesis work. The thesis work has been limited to the production process and the aim has been to enable this process to be certified according to ISO 9001:2008. The work has been performed by analyzing the existing quality management system and the requirements for each process included, whereby the gap between the current and the target state has been mapped. Suggestions have then been made on how this gap can be filled, some of these suggestions have also been carried out during the thesis work. The conclusions drawn are that quality management does not have to be complicated, but quickly becomes so when the complexity of the processes increases.

Climate changing is a growing problem for many countries and communities over the world. The cities has a huge work to deal with in their reforcements of their cities to be resilient ones. This thesis makes an effort to investigate and illuminate some of the problem the cities has to solve related to flooding, hazards, erosions, rising sea levels and crotches. This thesis will help to find solutions that international and national efforts has produced and handed out to each other. A lot of communities are charing their excellent tools that works for them.

The purpose of this thesis is to contribute to a further understanding of the complexity in green consumer behaviour by examining how and why individuals priorities values, personal norms and identity in green consumer behaviour. The thesis employs a qualitative approach with an abductive strategy. The empirical data was produced through in-depth interviews with green consumers. Based upon the empirical findings and theoretical concepts, a conceptual model was introduced to illustrate how consumers prioritise between several values when assessing green products. The prioritisation is dependent on internalised values as well as the product function and the need that the consumer seeks fulfilled.

The purpose of this thesis was to create a communication interface which insures that all the right hardware is in its right place in the IS-node before Ericsson AB delivers it to their customers. One of the first parts of this work was to make sure it is possible to create such an interface for IS. This thesis then explains how to construct an interface that retrieves information from the IS-node into a C#-application. One important part of this project was to collect information and transform it to an XML output with the purpose of then being used in other applications in the future. The application created within the scope of the thesis exports the information retrieved from the IS-node in an XML-file or a text-file.

This thesis takes on a broader perspective of the modern age phenomenon we call spam. One of the aims of this thesis is to present and to compare the variety of methods used in the day-to-day fight against spam, as far they have evolved today, but also to present and discuss some alternative methods for suggested future use. The properties of a common e-mail spam are analyzed to show how the components that make up the structure in an e-mail can be used to classify spam. Furthermore I explain the naïve Bayesian classification methods, the signature-based method, the commonly used rule-based method and the challenge and response method and discuss these. The widespread use of blacklists is also explained and a close new variant to blacklisting, Turntide is presented and discussed.

This thesis has been performed as a part of the Bachelor degree in Industrial Engineering and Management at the School of Engineering in Jönköping. The thesis is written on behalf of Pallco AB, which is an engineering company that performs subcontracting, surface treatment, and assembly of components, mainly in steel and aluminium. The thesis focuses on identifying and analyzing the customer order fulfillment process of three customers at Pallco AB.The main objective of the thesis is to distinguish time differences in the company?s administrative work for each of the three customers. Furthermore, Lean thinking is following as a thread through the whole thesis.

The philosopher Heraclitus has been renowned for a great amount of time. Despite that fact the remaining fragments of his work have just recently been assembled to the composed form they have today. Among these fragments there are a couple of terms that stands out amongst others; one of them is the term logos. The main focus of this thesis is devoted to the mystery and usage of the term logos, which comes into a great display in fragment number 50.The ambition of the thesis is to evaluate and compare three interpreters? readings of Heraclitus while having a close focus on his usage of the word logos in fragment 50.