The climate change the earth today has to face is no longer a global problem when every individual has a responsibility to act. The residents in Sweden have no understanding how their energy consumption affects the environment, nor what measures can be taken to reduce the energy consumption.The use of the energy in new Buildings is considerably lower than in the older ones as conditions have improved and the requirements have been more stringent. As most of the buildings in the future have already been constructed it´s important to take every opportunity for energy efficiency and rebuilding of available buildings will become a significant act. Reconstruction of a building contributes generally to both a reduced individual and a reduced total energy use, while new constructions only keep a low individual energy use but a increase the total energy use. For this reason we present the opportunities for reconstruction, mainly to reach the standards for a passive house..

The world?s consumption is increasing at an accelerating rate and it´s produced and consumed more goods and services than ever before. A large part of people's consumption consists of clothing that is bought and discarded increasingly leading to a number of environmental problems such as global warming, pollution, loss of biodiversity and the depletion of natural assets. One way to save the earth's resources is to buy used clothing, so called second hand, instead of new ones. The store chain ?The Ants? (in Swedish ?Myrorna?) has specializing in second-hand goods and sells, among other things, clothes.

Understensho?jden is Stockholm's largest eco-village which was built in the early 1990s with the vision of enabling ecological living for people. However the ecovillage is no longer considered as environmentally friendly because of its relatively high energy consumption, and non-updated energy system. The purpose of this study is therefore to investigate how Understensho?jden should reduce their energy consumption and upgrade its energy system by using Blower-Door, IR-camera and Design Builder.

Since energy simulations are used to verify that projected residential buildings will reach the current energy requirements it is important that the results are reliable.This report investigates the extent of uncertainty in energy simulations, estimates the causes of the uncertainty and its economic and environmental consequences.The method used in this report is based on three validation methods; empirical validation, analytical validation and comparative validation. The analysis was carried out for five multi-family dwellings in Uppsala with installed meters for energy measurements. One of these objects, Klockarlunden, was studied in more detail than the others.The results show that the deviations are between 10 and 29% for the studied objects, which means that the uncertainty is estimated to be at least 29%. All simulations underestimate the buildings need of energy. The simulation for Klockarlunden can predict the energy consumption to be within the range of 46-98 kWh/m2year with 90% confidence level based on the current uncertainty.

The purpose on this study is to determine the extent of possible connections between tendencies to increased violent behavior and increased alcohol consumption among a total cohort of girls in the 9th grade compulsory school and 2nd grade upper secondary school in a Swedish county. In 2004 the Epidemiological Department carried out a health-status survey, using a self-report questionnaire, with students from both private and public schools in a specific county in Sweden. All respondents (N= ca 4000), attending all compulsory (at 9th grade) and upper secondary schools (second tier) on the survey date completed the questionnaire. For this particular study, 9 questions from the questionnaire, all concerning self-reported violent behavior and alcohol consumption habits were used either individually or combined in index variables. The result showed that while violence experience is low among these 4000 girls, it increased in relation to a corresponding increase in alcohol consumption.

The study aims to reduce energy consumption in apartment buildings where individual metering and charging of heat is applied. The aim is to develop planning and design for individual metering and charging in apartment buildings.The study is based on literature review, interviews and case study that include analysis of existing documents. Interviews were carried out with the property developer and the involved consultants who planned the apartment building Yasuragi. To investigate the differences the condominium association has noted in heat consumption between flats, the debit values of the heat were used to discern which houses that were furthest from the average consumption. On these flats there were temperature measurements and thermal photo shoots made for discriminating behavior and possible construction techniques which could be the explanation for the heat spread.Boverket shows that the consumption of heat can be reduced by 10-20% after insertion of individual metering and charging in an apartment block.

- ABSTRACT ?Title: Winners of the Web ( Webbens vinnare)Number of pages: 35 (including enclosures)Author: Lydia KellamTutor: Else NygrenCourse: Media and Communication Studies CPeriod: Fall Semester 2006University: Division of Media and Communication, Department of Information SciencePurpose: The aim of the research paper was to see Internet and the digital techniques impact on marketing communication and consuming behavior on the Web. By understanding the relationship between marketing communication and consumer behavior my intentions were to comprehend how consumer behavior on the web could be understand. The purpose of this paper is to understand how different marketing activities on the Internet are followed by consumption.Material/Method: By using focus group interviews I wanted to study how individuals act on the Internet. How different activities such as communication and participation on the web could lead to consumption on the Internet.

This study examines the eWOM effect, more specifically: how customer reviews effects consumers. The study is based on a modified version of the Regulatory Focus Theory which describes consumer behavior using consumer consumption goals. The purpose of this study was to examine how positive and negative customer review's influence consumers when analyzing products that are equally characterized by two consumption goals: promotion and prevention goals. The authors combined quantitative (questionnaire) and qualitative (focus groups) research methods with the sample selection for both research methods being based on students of Södertörns University. Results indicate that negative customer reviews have a stronger influence on consumers than positive customer reviews when analyzing products that are equally characterized by the promotion goals and prevention goals.

This report was performed in order to evaluate a new technological measure and focuses generally on a heat pump system to a HWC-washing machine. The client is Asko Appliances AB, a company well known for its environmentally friendly products. The goal of this study was to improve the energy efficiency of a washing machine by combining a heat pump device to the heater of the wash water, in order to reduce the energy consumed for heating the water. Besides reducing the energy consumption in heating the water, the washing machine was required to meet low noise and short operating time specifications. For that purpose, nine trials in three test series have been carried out.

The master thesis, conducted at Metrima AB, concerns the development of a non-intrusivedistribution meter as a basis for individual tap water billing in apartments.The project is conducted in response to the market interest in individual tap water billing inapartments as an answer to environmental concerns regarding water consumption. Due to thehigh installation cost of traditional water meters, a new method of determining waterconsumption, without having to cut water pipes, is proposed.The proposed method distributes the total water consumption for an apartment complex toindividual apartments according to distribution meters, measuring water run-time, in eachapartment. The water run-time is estimated by measuring the water pipe?s outward vibrationsand temperature changes.A test environment was established and a prototype built, using a tilt- and vibration sensor forvibration sensing and a precision temperature sensor to measure temperature changes. As bothsensors work well in the test environment, further testing was done in 3 apartments for aduration of 5 days.

Intelligent IT-based solutions, often called Smart Grids, are considered to be the future balancers of renewable energy sources. One area within the Smart Grid concept is called demand response, which is focused on making customers more consumption flexible by making them more active in their consumption. In this thesis the aim is to analyze a business model by investigating the income potential for a demand response solution as well as its market potential. This has been done through literature studies, interviews and development of a computational model.The use of 5000 households with flexible consumption can provide a cost reduction of 17.2% or 2.4 million SEK for a balance responsible party during an average year. If the solution is used to make strategic bids on the regulation markets the study indicates that the largest potential for revenues lies within this strategy.

Sustainable design - a study on sustainable design and its incentives and barriersThe purpose of this study was to investigate the incentives and barriers existing within companies focusing on eco-design. The aim was also to examine the consumers? thoughts on eco-design and sustainable products. A further aim was to try to concretize important lessons for future work on sustainable production and consumption. Two methods were used for completing this study; a literature study and a practical study consisting of interviews with companies focusing on eco-design and a survey among students.

Biogas is a renewable energy produced through anaerobic digestion, which means that organic matter is degraded by microorganisms under anaerobic conditions. The produced biogas can then be used for cogeneration, electricity, heat or upgraded to vehicle gas. Eskilstuna Energy & Environment AB has four digesters at Ekeby water sewage treatment plant, Eskilstuna. One of the biogas reactor (RK4) is equipped with a jet-mixing system while the remaining digester uses top-mixing. The mixing system is an important parameter to achieve optimum operating conditions for the process regarding gas production and degree of digestion.

Drain water heat recovery is an uncommon measure in multi-unit residential buildings. There istechnology available for the purpose but the knowing and experience of the heat recovery systems islittle. The purpose of this thesis is to evaluate the future potential of drain water heat recovery inmulti-unit residential buildings.A major part of the multi-unit residential buildings in Sweden were built during modernismen andrekordåren (1940?1975). Many of the buildings have worn out drain and water supply systems andmany are in need of a general refurbishment.

In today?s modern age, energy consumption has become a major issue, both from an environmental viewpoint and cost perspective. Because of a rapid technologic change and increased costs of production of electricity, the demand to develop effective methods for energy efficiency industries have grown.The electricity-intensive industries, such as plastic industry, the demand to reduce energy consumption has grown significantly over the past 10 years, which have led to the development of different methods to determine and locate energy-consuming parts in the industry. This also means being able to prioritize and organize activities in the industry.In this study the measurements of voltage, current, power and PF performance on injection molding machines (K-TEC 275 form Ferromatik Milacron in Germany) with a focus to locate, within a machine, various measures that could improve energy use in the plastics industry, in this case RostiGP in Gislaved. These measurements have been carried out with the help of a power quality clamp meter to carry out time logs of the machines for some time during normal word rate.