The purpose of this study was to survey the occurrence of and obstacles to team training inneonatal life support in Swedish hospitals and, accordingly, to compare university hospitalswith other hospitals. The study included all the managers in 37 pediatric wards whoparticipated in telephone interviews with the aid of a questionnaire. The results showed that81 % of the Swedish hospitals that have a paediatric ward train the staff in neonatal lifesupport. All of the university hospitals and 74 % of the other hospitals are running training insome form. The methods of training varied and so did the occurrence of training.

In published studies it is found that the fuel consumption on a forwarder is relatively constant, on time basis. A certain variation between different sizes of forwarders occurs as well as between different working elements. The aim of the study was to establish a forwarders comparatively fuel consumption when driving on road and in the terrain, loaded and unloaded, with high and low gear and with high and low speed as well as with hydrostatic and hydrodynamic transmission. A hypothesis was that low rpm gives lower fuel consumption on distance basic, at all trials. The test driving was made with a Hemek 750 which is a three geared hydrostatic machine and with a Hemek 700 which is a hydrodynamic machine with six gears.

In this thesis, the Train Power System Simulator (TPSS) has been compared and verified with the commercial simulator TracFeed® Simulation (TracFeed). The basis for the comparison was a given part of the Swedish railway system, with steel transportation trains. Primarily, emphasis was placed on running time and energy consumption in simulation results. Two transformer systems were analyzed, booster and auto transformers. The high voltage transmission line, parallel to the railroad track, was disconnected in some simulations.

Cardiac arrhythmias and heart diseases can result in a limited performance capacity which could lead to anxiety and depression. Objective: The aim of this study was to investigate the prevalence of symptoms of depression among patients with cardiac arrhythmias. The intention was also to explore differences between men and women in the occurrence of symptoms of depression. Furthermore, the prevalence of symptoms of depression among patients with cardiac arrhythmias was compared with a Swedish general population. Method: For two weeks MADRS-S, a self-rating scale for depression, were distributed at a medicine ward where patients with cardiac arrhythmias are treated, at a hospital in Sweden.

Hip dysplasia is a common, inherited malformation of the coxofemoral joint that eventually leads to osteoarthrosis. Several breeds of dogs are affected and the prevalence varies between different breeds. As part of the effort to reduce the prevalence of hip dysplasia and select dogs suitable for breeding, radiological screening is performed by at least 12 months of age. Before the radiological examination the dog has to be chemically restrained, sedated or anesthetized. The sedation protocol used differs between veterinary clinics. The impact of sedation method of the screening result for hip dysplasia has been studied.

It is common that patients experience emotional reactions as agony and anxiety after an acute myocardial infarction. Only a few studies related to the support in the acute stage have been made. The aim was to describe how nurses declared their support to patients with acute myocardial infarction in the acute stage. The used method was semi structured interviews with seven nurses in an Emergency ward in South of Sweden. The material was processed and analysed with inspiration from content analysis and produced two main themes.

This study aims to theoretically investigate the concepts of the interpersonal actions 'to motivate' and 'to manipulate' and also to examine possible differences and similarities between the two. The method used is a conceptual review based on the Self-Determination Theory, related to the concept of motivation, and Machiavellianism, related to the concept of manipu-lation. The results show that 'to motivate', according to Self-Determination Theory, concerns influencing the intrinsic or extrinsic motivation, where intrinsic motivation is related to the feeling of self-determination, inner locus of causality, being or feeling competent and exercise activities for the pleasure of it, whilst extrinsic motivation is related to external locus of cau-sality, external pressure and engaging in activities for the purpose of reaching a goal or re-ward. 'To manipulate' is according to Machiavellianism based on the manipulator doing whatever it takes to reach a certain goal and gain something for himself with no regard of what methods being used. The comparative analysis showed that the crucial difference in how an behaviour is interpreted as either, or both, motivating and manipulative is based on who is doing the interpretation, what information she has and which aspects that are focused on..

The purpose of this study is to look into how detained swedish juveniles, in the ages between 15 an 20, experience time in custody. The primary questions are; To what exctent do juveniles understand their situation? To what exctent can juveniles handle their situation? Do the juveniles find meaning in their situation and if so, what aspects of the detention is considered meaningful? The study is based on seven qualitative interviews with young men detained at a youth custody ward at Kronobergshäktet in Stockholm. The theory used to analyze the interview results is Antonovskys theory of sence of coherence (SOC). A salient feature in the young mens experiences was that all of them had the ability to regard some of the aspects of the detention as meaningful.

Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings.

Due to the new demands put upon combat vehicles of today the development quickly strives for-ward. With developers and experts across the globe working to meet the needs of tomorrows armies. The question we ask ourselves is what will be the characteristics of these vehicles. In order to be able to categorize combat vehicle and analyze its characteristics we use the principles of war. Based on J.F.C Fullers theory from the early 19 hundreds that anything can be analysed using these principles, through a modern interpretation of the Swedish army, we can categorise the present and future abilities of combat vehicles.

ABSTRACTThe fauna of the Lower Cambrian is far from fully understood, as is the environment of that epoch. Some of the most crucial moments in the history of evolution takes place during this epoch; the Cambrian explosion and the appearance of ecosystems as we know them. That makes it an important period to investigate. Doing so, the Lower Cambrian offers a lot of problems, one of which is that body fossils are seldom preserved. That has often left us with trace fossils to create an image of the Lower Cambrian life, but also some bedrock features such as ripple marks.The main purpose of this work has been to investigate the possibilities of relating the wave lengths and forms of recent wave-generated ripples to fossil ones, and also to evaluate the methods for that kind of comparison.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Stone walls in agricultural land are incorporated in the general protection of biotopes. They are protected because they provide a habitat for endangered species. Therefore it is illegal to carry out proceedings in an area that is included in the protection of biotopes. In order to do that, exemption is needed which can only be granted if there are special reasons. The essay stipulates what these special reasons are.In an exemption errand the interest for nature conservation must be weighed against a public or a private interest.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.