Pre-workout (PWO) is one, fast-growing, supplement on the market that promise fat burning, bigger muscels and energy and by buying these expensive supplements, you can get your dreambody faster than others. This study is mainly about researching why people use PWO and what experiences they have about using these supplements. By using a qualitative method I have found out that the participants mainly uses PWO to get energy and focus. This study also shows that my participants thinks that there is a difference in energy between using and not using PWO..

Environmental impact and management of energy is a highly topical issue in today's society. Climate impact must be reduced. The Government has set a target to reduce energy consumption in buildings by 20 % by 2020 and 50 % by 2050 compared to the energy use in 1995.With this in mind, we chose to examine how property owners can work on improving energy efficiency in existing apartment buildings. We also wanted to investigate profitability of different increasing energy efficiency measures and the calculation methods and the risk assessment performed by such investments. To tie in with government objectives, we also saw the possibilities of achieving these goals.20 companies were interviewed, of which 14 were property owners and 6 were consulting firms that works with energy efficiency.

Vattenfall Heat Uppsala runs the waste incineration plant in Uppsala, which produces district heating, process steam, district cooling and electricity. Vattenfall Heat Uppsala has decided to introduce an energy management system with the aim to increase the energy efficiency of the plant. The basis in such a system is to make an energy mapping.In this thesis an energy mapping has been performed at the waste incineration plant with the aim to identify and determine the size of energy flows. The investigated energy flows are used fuel, produced and used steam, produced district heating and cooling. Also the use of electricity to run the processes has been investigated.

Mål - Att spara 1 GWh underhållsenergi på Karlshamsverket.Metod - Att lokalisera de största energisänkorna på kraftverket, göra mätningar eller uppskattningar på hur mycket energi dessa förbrukar, för att där efter ge förslag på tekniska åtgärder, med tillhörande ekonomiska beräkningar som ska reducera energiförbrukningen..

Volvo Trucks is the second largest manufacturer of heavy trucks, with factories in several countries and with around 21 000 employees. At the plant in Tuve, trucks have been built since 1982 and the activity mainly consists of producing side members and to assemble and packing kits of trucks. In 2005, the factory in Tuve launched the ambition to be the first carbon dioxide neutral vehicle factory in the world. This will be implemented by streamlining and investing in renewable energy. The aim of this degree thesis is to map the usage of energy within production, and also to prepare a method to measure key figures (use of energy per produced unit).

Every year new premises are built in Sweden, and even if they are made as energy efficient as possible, this will not reduce the energy demands, but the rate of the increase of the energy use will be reduced. One type of facility in Sweden that is a major energy user is public baths, and this makes public baths an interesting facility to study more closely. There are around 500 public baths in Sweden and about 75 % of those can be seen as older baths with large need of renovation, and they all require a high level of energy efficiency measures. To show how the energy demand increase or decrease depending on the changes chosen to be made, the simulation application IDA Indoor Climate and Energy was used. Simulations were made and compared for several cases, with two extreme cases as starting points.

The purpose of this project was to evaluate how energy efficiently some of JM?s residential buildings can become in standard production. What kind of measures are needed to achieve the level of energy demand that is included in BBR12 (Boverkets Byggregler)? What measures are needed for achieving a lower demand so that the buildings could be classified as passive houses? The investigation has included a single family house and two different types of apartment blocks.The simulation programs Enorm and VIP+ have been used to calculate the energy demand of the buildings. The results from the programs have been compared with the measured energy demand for the three buildings.

The aim of this study is to find a method to incorporate the energydemand of a building in the investment cost estimate.The study is based on an actual apartment block. The significant energyaspects are identified, and changed to more energy efficient options.These are then simulated using the energy calculation program VIP+.The calculated energy need is used in the investment cost estimate, andthe simulated alternatives are compared in regards to their economicalprofitability.Depending on the focus, different alternatives are the most advantageous.Since this study aims to show which alternative is the mosteconomically profitable, the annual profit is the parameter of mostimportance. This means that individual measuring of heating and hotwater use is the recommended change of the original house. A changeof the windows to new ones with a U-value of 1,0 as well as 0,8W/m2K also results in a positive change of the annual profit comparedto the original house..

This report discusses a method to detect divers in harbour environments usingpassive acoustic detection. The goal was to achieve as high detection as possiblewithout having too high false alarm rate. A short execution time was also desirable.By using the characteristic of an inhalation a band-pass filter was applied to the signalto improve the signal to noise ratio. After the filtering an energy estimation of thesignal was made. This energy estimation was later used in a frequency analysis, whichcould tell us if there were enough energy in the frequencies that correspond to adivers breathing frequency.

Sweden?s energy consumption is divided into three major sectors. One of them is the industry sector. One third of Sweden?s energy consumption is converted in the industries.

The dishwasher is a wide spread product that occurs in many households. It saves the user time,water and energy. When using a dishwasher instead of doing dishes by hand a lot of energy issaved.The importance of lowering the energy consumption does not only come from the consumerwinnings but also from an environmental point of view. Scientists are certain that the globalwarming comes from the emission of green house gasses that is created by human consumptionof oil, gas and coal.Dishwashers today are a lot more energy efficient than older dishwashers, but there are stillmargins to lower the energy consumption. The aim with this project is to investigate thedishwasher and it?s washing cycle, noting different phases and components that contribute towaste of energy.

In Sweden the real estate sector accounts for 33 % of energy consumption and just below 10 % of the emission of carbon dioxide. As a consequence of the external pressure from climate change it?s in everybody?s interest to reduce the energy consumption and thus reduce the emission of carbon dioxide. An additional incentive to reduce the energy consumption is the substantial increase of the energy price since the deregulation of the electricity market in 1996.In this study the techniques that exist to build multi-storey residential buildings with high energy performance will be investigated. Further the study intends to investigate the optimal energy performance from a real estate economic perspective.In order to investigate the optimal energy performance a model has been created with the parameters investment cost, rental revenues, operation and maintenance cost, discount rate and investment horizon.The result shows a relationship between a high investment cost and a high energy performance for newly constructed multi-storey residential buildings.

Energy efficiency is today more important than ever, mainly due to the high energy prices and the approaching climate changes. Heating of buildings is an essential area within energy efficiency. Many buildings are old and were built at a time when the energy prices were low and the term ?energy efficiency? was unheard of. By applying today?s broad range of energy saving actions on these old, and thereby often, heating ineffective buildings, this area has a large potential in reducing energy consumption and costs.Churches and chapels are generally old buildings with, in many cases, ineffective heating systems and therefore consume much more energy than needed.

Sigma energy app is a mobile application for subscribers to various energy subscriptions. The subscribers can use this mobile application to access information regarding their consumption, invoices and active subscriptions. The mobile application that was built consists of a GUI and a web API as middleman between the application and the database.                     .

In Sweden, a big part of the energy use is used in the housing sector. Political goals and targets are set up which the housing sector needs to work towards. Apartment buildings are a major part of the housing sector in Sweden and therefore reduction of energy use in these kinds of buildings are key to lower the energy use in Sweden. But there are not only political incentives to reduce the energy use. Some energy?saving measures are directly profitable and should thus be performed.