To fulfill the climate target that EU and the Swedish government have decided to apply, it becomes increasingly important that the energy efficiency of existing buildings and making new buildings energy efficient as possible. Of Sweden?s total energy consumption in 2011 was 40% used by residential and service. Of the 40% of the energy consumption was 60% used for heating and domestic hot water. A report from year 2012 shows that one reason why the heating volume is so great could be due to underestimating on the energy consumption for the heating in the planning of the building.

This thesis is the result of the investigation and solution of a mechanicalproblem regarding flywheel malfunctions. A flywheel is, in short, a devicethat relies on a rotating object?s moment of inertia to store energy overshort time spans. This project is part of the development of a fourthflywheel prototype at the division for electricity at Uppsala university,which uses magnetic levitation to keep a hollow cylinder rotating at veryhigh speeds inside a vacuum chamber. Should the magnets fail however, orsome other error occur that leads to an uncontrolled state of rotation, thecylinder needs to be stabilized mechanically by a device usually referredto as ?back-up bearing?.

Emission of nitrogen oxides as well as carbon monoxides is an inevitable result of combustion. A Swedish law "Law of environmental fee for emissions of nitrogen oxides as a result of energy production" (lagen om miljöavgift på utsläpp av kväveoxider vid energiproduktion (SFS 1990:613)) controls the emission of NOx from energy production by a system of fees. The system has resulted in a strong approach toward less emissions of NOx among the energy production plants. High emission levels, today exceeding 52 mg/MJsupplied fuel, leads to costs for energy production companies. This paper examines possibilities to reduce the emissions of NOx by optimization of the SNCR-technique in a biofuel fired heat and power plant.

AbstractWe are interested in group meetings of the self-help group Alcoholic Anonymous and the emotional energy created therein. We examine which impact self-help group AA has on its group participants regarding: group meetings, dealing with alcoholism and identity. Group membership has great value for individuals; it provides social identity and possibility to self-value. Previous research shows that group members of self-help groups who have been sober for a period of time experience higher self-esteem and less anxiety compared to non-members. Our thesis is based on a hermeneutic approach.

This thesis is based on a case study for the real estate manager Mimer in Västerås. Mimer provides a great deal of this city?s rental apartments. Many of their buildings have ventilation systems with a type of heat-recovery called ?heatpipe?.

This project operate an environmental assessment of total waste was conducted by using a life cycle assessment (LCA), that examines the environmental benefits of recycling production waste from Atlas Copco at Stena recycling. Atlas Copco is a company engaged in the development and production of rig-mounted hydraulic breakers and handheld air breakers and handheld motorized rotisserie. Stena recycling is a recycling company engaged in recycling, processing and refining of metals, paper, electronics waste and hazardous waste.The purpose of this study is to focus on Stena customer Atlas Copco and evaluate environmental benefits between to recycle and not to do it. The result shows that the total energy gain, resulting from the recycling of waste fractions, lands at 6 990 089 MJ, corresponding to drive 3 times around the Equator with a truck (40 t). The result shows that recycling 3040 kg paper provides an energy gain of (38 600 MJ) compared with burning paper (19 500 MJ) is 19 100 MJ, which corresponds to heat a house for 11 weeks.

Wind power is an energy source that is becoming increasingly popular in Sweden and around the world. The establishment of large wind farms supply and contributes to energy production within grid in search of a more sustainable energy production. Wind power is becoming more popular and opens up new areas of implementation. More cities are starting to use small-scale urban wind power, everything from full-scale work for a little less work adapted to the villas. Sweden has high goals regarding the production of green electricity and the work which deals with the conditions Sweden plays in achieving those goals.

This is a work that look at the factors that affect future monthly costs when buying a house in Sweden and which options are the most financially favorable over a 30 year period. The work also examines whether it is economically beneficial to invest in a low-energy house regardless of geographic location in Sweden, and discuss about whether a calculation template can help individuals to choose more environmentally friendly options. The work has been limited so that a certain number of predetermined factors and its measurable values have been developed with the help of a literature study. The factors chosen are building type, climate, heating systems, loan interest rates, energy prices, energy price increases, inflation rates and down payment. These are then combined into 72 different calculation cases which get put in a calculation model made in excel.

Kraven på att nybyggda bostäder ska vara energisnåla i driftskedet ökar hela tiden av flera anledningar. Dels vill brukarna hålla driftskostnaderna så låga som möjligt och dels är det miljöaspekten som spelar in. Men hur energisnål kan en villa egentligen göras och hur påverkas arkitekturen då den görs extremt energieffektiv?I den här rapporten utreds tio energieffektiva principer som kan användas för att göra en villa mer energisnål och energiproducerande. Alla tio principer har tillämpats i en villa som projekterats under arbetets gång.

The wind power increase of Gotland as well as other parts of Sweden during the last ten year period has meant that this renewable energy source has increased its share over other fossil sources. The year of 2011 became the first when the wind power produced more energy than an average nuclear reactor. Now that wind power is in an expansive phase, the land issue will be of great interest. Land with good wind resources will be of interest to wind energy developers. The problems that this essay is based on are; how can landowners altering the economic conditions at a wind power establishment? What opportunities and obstacles exist for landowners who choose to set up wind power on their land? The purpose of this essay is to highlight the economic conditions that exist for landowners for the establishment of wind farms, with regard to compensation for the leasing and return on invested capital.

En jämförelsestudie har genomförts mellan två värmesystem. Analysen har genomförts med ett flerbostadshus som referensfasighet. Fastigheten är lokaliserad i Södertälje kommun. Analysen går ut på att bestämma vilket värmesystem som är fördelaktigt vid renovering av äldre flerbostadshus med avseende på energi och kostnad. De systemen som har behandlats är ett centralt värmesystem med motströmsvärmeväxlare och ett centralt värmesystem med frånluftsvärmepump.Det centrala värmesystemet (Eq aggregat) är ett centralt från- och tilluftssystem med återvinning (FTX system).

The purpose of this study has been to investigate advantages and problems with distributionsystem metering in substations. This report is a study in cooperation with Göteborg Energi.The analyses in this report are made for GENAB, a subsidiary company of Göteborg Energi.To analyse advantages and problems in advance is interesting information for GENAB. Theresult of the report could be based upon whether installation of metering in distributionsubstations will be implemented and in that case which kind of measurement that is relevant.The most relevant and strategic place to implement measurement is at the distributionsubstations on the secondary side (400V), this is due to the placement of the currenttransformers. The measurements in this study involve current, voltage, power, power factor,temperature, energy and power quality.Measuring instruments that are relevant to implement are intended to measure current,voltage, power, power factor, energy and, possibly, power quality in the same measuring unit.It is desirable to have a measuring instrument that measures both energy and power qualitybut since it is most often a cost question, it can be established that energy meters have a lowercost.Metering in distribution substations gives a better illustration of the power network. Thisresults in many advantages for GENAB.

Lumilos is a work investigating the possibilities to use light and color in an interactive design context. I have explored different light sources and compared them to each other and given a short description of the history of light and how it has been developed during the industrialization in the western world. I have also investigated what is currently done in the field and summarized that with examples in the categories passive-, colored-, material- and interactive light. The conclusion is that working with interactive color and light is a hard task. There are many different angles to take into account such as personal likings and earlier experiences that is uncontrollable by the designer. Yet there are many possibilities and light is a material that is moldable in many forms. I have put the knowledge about light and color into practice and developed an interactive light wall that is visualizing energy consumption with the use of different colors of light and animations.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.