This project was started within the Market-Design programme of Elforsk, with the aim of developing representative test systems of Swedish distribution networks. Using such test systems as a basis for reliability and customer interruption cost calculations makes it feasible to analyse the network tariff regulation of Swedish power  istribution companies. In particular, it enables studies of the incentives for companies to invest in system reliability. Until now, the available test systems are either not representative of Swedish conditions, or too small in scale and limited in function.Within this project we have created two test systems. In order to represent the diversity of actual Swedish distribution networks, we have created one test system for urban environments and another for rural environments.

This thesis, in the field of healthcare logistics, has been carried out at Hjärt- och Medicincentrum (HMC) at the University Hospital in Linköping during the fall and spring of 2012/2013. The thesis is done by two students at Linköping University at master?s level within the framework of Industrial Engineering and Management.As Sweden's county councils should not make a profit or loss, it is important that the councils are aware of how much care processes cost. Kardiologiska kliniken at HMC in Östergötland?s county council is one of the clinics that are profitable.

The economic analysis of building contracts is an unexplored field within Law and Economics. This paper makes an attempt to cast some light over the subject and encourage to more research within the field. The main purpose has been to describe why the actual price in a public construction project often turns out to be higher than the contract price and offer a way of handle that risk. In the paper a model is set up that shows an optimal contract given expectations on actual price and gaps in contracts. Cost increases for the buyer can mainly be explained by two situations.

Emotron is a company specialised in developing, producing and marketing equipment to con-trol, monitor and protect processes and machinery driven by electric motors, with an applica-tion focus. Examples of uses for their products are fans, pumps, lifts and cranes.The project is to look at Emotrons end of line test. The company has seen that at the final test-ing there is a bottleneck that restricts the outflow and prevents an increase in the number of tested products.The purpose of this project is to review how Emotrons end-of-line test works today and if there is a possibility to make the test more efficient in such a way that the quality is not at risk, while increasing the outflow of tested products.The projects first step is to look at and analyse what is causing the bottleneck at the end-of-line. When the analysis is complete, the next step is to review whether there is a possibility to solve the bottleneck and if so in what way can this be done. Emotrons most overall objective of the project is to increase the outflow of the number of tested products without jeopardizing the quality.An analysis has been made on frequency inverters, soft starters and shaft power monitors.

This final project is an investigation about the responsibility in rooms where the walls and floors are exposed or partly exposed to irrigation of water, as a bathroom, laundry room and WC. The cost for all water damage is valued for 5 000 000 000 SEK each year. How is this possible with all information about the problem and good materials? Who is responsible? Incites had been made in the subject throw reading reports and participation in courses about how to make a room mention above. Discussions have been made with workers in the trade of making the walls waterproof.The conclusion in the rapport is about who´s responsible for the damages and will pay the cost of the renovation. The responsibility is discussed between the contractor and the insurance company.

This study looks into the possibility, and profitability, of expanding a pilot project that has been put into action at GGP Sweden AB in Tranås, a manufacturing company that produces front mowers. The pilot project is meant to give GGP Sweden AB a more precise control of the flow of goods from their suppliers, and its essence has proven to be quite similar to the Japanese Just-in-Time philosophy.The study has been divided into four separate areas; mapping, supplier selection, supplier evaluation and cost analysis. These areas represent a holistic perspective on the expansion of the pilot project and cover topics varying from methods of finding suitable JIT-suppliers, constructing Key Performance Indicators (KPI) to reviewing costs and assessing profitabilities.In this report, the reader will initially take part in the works of mapping GGP?s manufacturing unit, pilot project and supplier base, which results in a list containing the most suitable suppliers for a Just-in-Time based collaboration. Afterwards, the reader will be led into the area of supplier evaluation, where five KPI?s are created with the purpose of ensuring that GGP will be able to evaluate their suppliers and pilot project in an effective way.

This paper discusses the strategy and strategic change in the Swedish freight forwarding business and analysis factors that influence the forces of the business. Three companies of various sizes are chosen to be investigated as a case study, outline that cost leadership and differentiation are both important strategies for companies to compete in the market. However, companies outpacing competition do not only pursue either of the two strategies, the need the ability to add one (cost leadership) to the other (differentiation) in relationship to environmental change over time..

The main purpose of this study is to investigate the needs of pre-commercial thinning on private owned forest properties, which is considered to be increasing. The reason is believed to be the high cost of labor that pre-commercial thinning brings. Furthermore thinning is costly, the revenue created through pre-commercial thinning are post-poned until the first thinning. The study was made through a survey among members of Mellanskog forest owners association. The survey was distributed by e-mail. The time to answer was set to two weeks. The answers indicate that the most common reason why the pre-commercial thinning is delayed, or not done at all, is the forest owner?s lack of time.

This paper deals with the opportunities for the technique of condensation, for wood fired household heaters, on the Swedish market. In this project the condenser is preceded by a scrubber and both energy exchange and separation of unburnt particles have been studied. The facility studied is connected to a wood stove at 30 kW. The tests would show that the effect from the stove never reached above 16 kW. This might be a result of the low temperature of the water going into the stove, from the condenser. In addition to this the wood was not of highest quality and the stove could have needed some maintenance before the tests.

In today's fast-paced, intense and complex media environment, it is hard for non-profit charity organizations to reach out and get their messages heard.In this study we examine whether the theories of advertising signaling also applies for charities. Past studies of the signaling theories indicates that higher perceived advertising expense leads to more positive effects on purchase behavior and brand perceptions. However, we believe that this does not apply for a charity organization. We argue that since charitable organizations have a fundamentally different mission than commercial companies, they will need different ways to signal quality and credibility, and therefore the common signal-theories will not hold for these organizations.To test our hypotheses, we conducted two surveys where the respondents saw one of five versions of the same ad for a well-known Swedish charity organization, or one of two ads for a commercial corporation. The ads had been manipulated to simulate different levels of perceived cost.Our results shows that perceived ad cost only affects attitude towards the ad if a charity was the sender, whereas perceived ad cost affects intentions, attitudes and credibility if a commercial corporation was the sender.

Specialarbete, 15 hpSvenska som andraspråk, SIS 133VT 2012 Handledare: Håkan Jansson.

This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The work was an assignment from Sydved Energy AB. The aim of the work was to compare the operational productivity between two kinds of forwarders for extraction of harvesting residues, one forwarder with a special compression device and one ordinary, slightly modified forwarder. Two sites were studied for each forwarder. The study shows that the annual production was about 11,000 m3 higher for the traditional forwarder. The cost for the traditional forwarder was SEK 0.9 lower per m3.

Optimizing energy systems is, in Sweden, as in many other countries, of growing interest. District heating systems are no exception. In 2012, 285 out of 290 municipals in Sweden had district heating in use and the majority of these systems have a higher return temperature than that which is possible with an error-free substation of day current technology. To, when possible, lower the return temperature is a way of increasing the effectiveness of the district heating system.This study means to investigate, through simulations and calculations, how big of a reduction in production cost a lower temperature in the city of Ystad?s district heating system would correspond to.

Purpose There are almost infinite numbers of ways to build dairy farms in Sweden. When building a new free stall barn you have the possibility to affect both working environment and animal welfare for many years to come. The construction costs are influenced by which type of barn that is built and what functions it contains, for example one can predict that automatic milking systems are more expensive to integrate than milking parlours. But what is the real cost of today for the construction of free stall barns with milking centres and how is it affected by construction methods and functions? Is the labour time influenced by the building costs? These are some of the questions this report will try to answer.

Title: Dormant companies ? Taxation of closely held companiesProblem: Many companies are facing a business transfer and fall within a smaller company with a few owners and therefore that tax jurisdiction is current. They risk facing high taxes but it can be avoid by setting the company in an inactive status for five years.Purpose: The purpose is to describe the inactive company rules and the verdict from the Swedish Supreme Administrative Court. Also to investigate how this verdict will affect company sellers.Method: Based on a case study and by analyzing the Swedish Law conclusions has been determinate.Result: A dormant company must be inactive for five years, and then the company can benefit from a different taxation. The owner and it´s relatives can´t be active in the company during this five year period.