The aim of this study is to find out whether there is any difference to be found in the attention ability before and after physical activity. The method used in this study was made of an experimental design. The participants were chosen through a cluster sampling and thereafter divided into a control group and an experimental group. A total of 64 pupils from upper secondary school participated in the study, 25 of them in the experimental group and 39 of them in the control group. Since the measure was repeated, both in respect of time and the comparison between the groups, a mixed design was used.

The aim of this thesis is to improve the control of urea injection at the combined power and heating plant Framtidens Gärstad (FTG). Tekniska Verken i Linköping AB is the owner of the plant.The FTG plant consists of a boiler where garbage combustion is done. From the combustion nitrogen oxides are emitted. These nitrogen oxides are hazardous to the environment. To reduce the nitrogen oxides, injection of urea into the boiler is used.

The aim of this thesis is to investigate how a valuation model of a Private Equity firm is interpreted into a management control system within the company's different organizational levels. A case study was developed based on the infra-net company Eltel. The management control systems developed by Malmi and Brown (2008)(1) was used to characterize the control systems at each organizational level. The building blocks of this system are planning, cybernetic, reward/compensation, administrative and culture. Miller and O'Learys (2007)(2) theory of mediating instruments and technology roadmaps was applied to analyze the mediating process of the valuation model.

In this report a system for Rapid Control Prototyping, RCP, is evaluated through animplementation of the motor control methods Field Oriented Control, FOC, and Space VectorPulse Width Modulation, SVPWM. The evaluation emphasizes on time-consumption andresource utilization on the used hardware and on usability for of software.A new mechatronic laboratory is under development at ABB Corporate Research in Västerås. Itwill be used for both mechanical and motion control design using existing and new hardware.The control structure in a traditional robot system will be interfaced to a rapid prototypingsystem which should allow easy changes to algorithms at different levels in the system.The system designated for this project comes from National Instruments and constitutesLabVIEW Real-time and FPGA module as the software tools. The hardware is a NI Single-Board RIO (Reconfigurable Input Output), sbRIO, development board including a Field-Programmable Gate Array, FPGA, from Xilinx and a microprocessor from FreescaleSemiconductor. Graphical programming is performed in the LabVIEW environment, andthrough Xilinx tools the LabVIEW FPGA code is compiled to VHDL code.A pre-study was carried out to clarify the concept of RCP and investigate different systems forRCP and their traits.

Background: Diabetes is a common disease where the degree of self-management is of paramount importance. Individual factors influences both cooping and general wellbeing among diabetic patients. Glycemic control is known to be important but other factors ought to be considered. Aim: The aim of this study was to describe how individual self-management influences the general wellbeing among adult diabetic patients. Method: This literature study is based on scientific articles.

As an amateur it can be difficult filming from several angles at the same time as this requires several cameras. It´s also hard to film at occasions when it´s not appropriate to manoeuvre the camera manually. Systems for solving these problems already exist, but it´s either more expensive, professionalsystems or cheaper systems with limited functionality.The purpose of this project is to develop a cost efficient solution to the problem above that offers a better functionality then existing commercial systems. The biggest difference from existing products is the wireless video feedback from the camera to the remote unit.The result of the project is a system consisting of two units, a manoeuvre unit with a cradle for the video camera and a remote unit from which the operator can control pan and tilt of the video camera.Communication between the two units is wireless.On the remote unit there is a joystick and a display mounted. In addition to this, there is also an IR receiver that is capable of reading the signal from the cameras own remote and sending it to the manoeuvre unit.The manoeuvre unit is equipped with one motor to control the tilt function and one motor to control the pan.

The purpose of this thesis is to examine how the Management Control System is affected by a change in the owner structure from family owned to not-family owned. The study also tries to identify explaining factors behind the possible effects to the Management Control System. The study is based on a comprehensive case study on the company Alcro-Beckers which, in year 2001, was acquired from the owner Lindéngruppen fully owned by Ulf G Lindén. The acquirer was the non-family owned company Kemira OY, a Finnish stock listed group. The empirical foundation mainly comes from interviews conducted with people who were/are directly connected to the company, either as employees or as representatives for the owner.

The objective of the present study was to evaluate distillers? dried grains with solubles (DDGS) as a protein source to rainbow trout (Oncorhynchus mykiss), by studying digestibility and growth measurements. One control diet, totally lacking DDGS, and three test diets were made containing 10 % (low), 31% (medium) and 51 % (high) DDGS respectively on dry matter (DM) basis. The control diet and the test diets were made to be as nutritionally equal as possible. Wheat bran was used to balance the fiber content of the diets.

This study is based on interviews with four youths that have been treated for problems such as drugabuse and criminality. The aim of this master´s thesis is to examine the youths experiences with the treatment they received, but also to examine how they look upon their own lifesituations. The study is presented in categories developed through the use of Grounded theory. The result points out that the treatment can be summarized mainly in two aspects- one concerning care and one concerning control. The first aspect includes supportive and friendly staff while control in this context stands for rules and supervision of different kinds.

Fusarium graminearum causes reduction in both yield and quality in cereal grain worldwide. One of the diseases it can cause is Fusarium Head Blight (FHB). Both sexually and asexually produced spores can infect living plants. Asexual conidia are produced in the mycelium while sexual ascospores form in asci in perithecia on debris. In biological control, living organsims are used to control pests and diseases.

Abstract: Private equity used to be synonymous with tremendous yields and rates of return. However, the private equity market trembled in 2008, due to the financial meltdown caused by the worldwide credit crisis. Considering the current low number of exits within the private equity industry, the purpose of this thesis is to examine if there has been any change in how private equity firms control their portfolio companies since the inception of the crisis. One private equity company and two portfolio companies have been studied. The case study is prepared from interviews with senior directors in the portfolio company and investment managers in the private equity firm.

In this study, the efficiency of a newly launched predatory mite, Amblydromalus limonicus, has been examined for its potential to use as a biological control agent in cucumber production. A. limonicus can be used for biological control of two thrips species, Frankliniella occidentalis and Thrips tabaci. Field trials were conducted in greenhouses of two conventional cucumber growers in Scania, the southern part of Sweden. The basic control agent used against thrips was the predatory mite Amblyseius swirskii. In selected areas, additional A.

This paper aims to describe the variation and develop a method to control the production for the product Metropol Kaktus from the snuff developer Fiedler & Lundgren. We are going to use the requirements from the product specifications as limits of the expected quality when we present methods to control the process. One method attempts to control during the process and the other attempts to maximize the number of products with strived quality before the process starts. Metropol Kaktus is a product produced with high quality, the mean weight is 20,023 gram and this is very close to the weight, 20 gram, which is reported in the product specifications. The variation in weight variable is less than what is reported in the specifications and the minimum weight is over the limit set by Livsmedelsverket.

I dagens samhälle är majoriteten av våra tillgångar digitaliserade och bevarade i olika typer av informationssystem. Genom Access Control (sv. behörighetsstyrning) säkerställs att användare får korrekt åtkomst till dessa tillgångar. I takt med att organisationer genererar allt mer affärskritisk data i sina informationssystem har dock hanteringen av användare och behörigheter komplicerats. En modern genre inom begreppet informationssystem som länge visat ökad tillväxt är Business Intelligence (BI).

This master of science thesis is focusing on how the fault handling on hardware connected toa control unit on a Scania vehicle is working. To the hardware counts buttons levers, sensorsand CAN. The work has been concentrated upon how the fault handling is working and if it ispossible to find any new fault modes.The control unit that has been studied is called the Coordinator and is the core in Scanias threenetworks of control units. The Coordinators work is to transmit messages between the threenetworks and to process signals from buttons, levers and sensors. The values is then usedinternally or is sent to other control units on the CAN networks.