The dry period is usually 6-8 weeks and in this period the basis of the performance in the following lactation is settled. In an average herd about 15% of the cows are dry (Marcussen & Krog Laursen, 2008). In many herd the dry cows are set aside, that means setting aside 15% of your herd, at the time when they are preparing for their next lactation. The recommendation for number of groups differs depending on country traditions or reasons for grouping. If you look at recommendation for feeding, some companies selling feeding equipment advocates one group throughout the dry period, but the number differs from one to three.

The aim of this Master?s thesis was to find out more about the delimiting quality- and shelf-life parameters over time for liquid oat-based products. According to that, to present applicable subjective and objective shelf-life test approaches at accelerated conditions. The study aimed to gain a deeper knowledge concerning the general and accepted way of performing accelerated storage tests. This study focused especially on products, which suffer from quality failure caused by oxidation, such as liquid oat-based products.

Relationship between social behaviour, feeding behaviour and performance of boars using single-space feeders A study on the behavioural patterns of growing boars is presented. The study was preformed at Quality Genetics? boar testing station Månseryd in Sweden. The boars were purebred Yorkshire, Hampshire or Landrace, born in nine different nucleus farms. The study is based on two batches of boars, with 63 and 69 boars respectively.

Today  Real  estate  companies  face  the  challenge  where  extensive  renovations  on  existinghousing built before 1980 must be performed. Conditions have changed and the housing need performance-­?enhancing measures that meet today's quality. With a current renovation rate,  it  would  take  30  years  to  meet  the  renovation  needs.  The  renovation  rate  must therefore rise dramatically, which requires the real estate companies to act consistently in accordance with commercial principles and in an economically, socially and environmentally responsible way.The  paper  discusses  renovation  strategies  in  four  municipal  housing  companies  in  the Stockholm  suburbs.  The  report  includes  surveys  of  four  ongoing  renovation  projects; Fastighets AB Förvaltaren in Sundbyberg project Hundloken 3, Stiftelsen Signalisten in Solna project Ritorp, Sollentunahem in Sollentuna project Svalgången och Väsbyhem in Upplands Väsby project Dragonvägen. The main purpose of this study was to analyze the practices of redevelopment projects.

LKAB is an international high tech mineral corporation and a world leading manufacturer of refined ironore products for steal manufacturing and other mineral products destined other industries. LKAB is an international corporation with companies world wide, with it?s main location in the north of Sweden, which is where the iron ore mines and the refining works are located. LKAB?s iron refining process in Vitåfors, Malmberget, is a source of great amounts of waste-rock.

AbstractAre we always aware of our actions and the affect they have on our environment? With this study we are exploring a phenomenon, called Jantelagen, which have affected the Swedish society for a long time. It is a phenomenon that where brought to life officially in the 1930?s by an author called Aksel Sandemose. We want to know if Jantelagen still exist in the society or if it has faded to the degree that it is no longer in use.

In May 2008, the Swedish Government proclaimed several proposals in order to increase the status of the teaching profession. One of the proposals was that each teacher should be obligated to obtain a "teaching license" to be allowed to teach. The license/certification will guarantee that the teacher has the sufficient knowledge of pedagogy and subject obtained from University. The existing teachers who do not hold a proper certification today will be given a certain time period to attain one. The teachers that are certificated teachers but that are giving lessons in subjects not certificated in will be given a chance to obtain the proper knowledge of the subject.

The environmental monitoring in Sweden has been developed by several different parties and is now being coordinated and made more effective in order to meet the current demands on high quality information regarding the state of the environment. Sweden has been divided into five different water districts based on watershed areas because of requirements in the Water Directive of the EU. In Sweden there are two common types of environmental monitoring programs used to gather information on changes in time and in space. Currently both these two types are used for lakes in the water district of the western sea but only one is used for watersheds. The purpose of this report is to supply basic information regarding the possible need for a second environmental monitoring program for watersheds in order to better describe the spatial variation within the district as well as to determine the number of samples necessary in order to describe the district over time and space.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

The purpose of this essay was to study how youths think about their youth and future. Our intention was to study in which order of priority today's high school students in Helsingborg ranked family life, education, career and vagabonding. We also investigated what the term adolescence meant to them.Our main questions were how our respondents looked upon their youth and their future. In which way did they give priority to family life, education, career and vagabonding and why did they give these priorities? Which meaning did the respondents lay in the term adolescence?The study was based on interviews with seven young people, studying at a communal high school in Helsingborg.

The purpose of this dissertation is to describe small businesses? opinions about the auditor as a business adviser as well as their need for advice, dependent on which stage of the lifecycle model they belong to. This dissertation has a qualitative approach as the authors wanted to gain a deeper understanding about the problem area. As the lifecycle model in this dissertation consist of three stages, the authors have interviewed six small businesses, two in each stage. The interviews were conducted with the owner and took place at the location of the business.

The Christianisation of Sweden is not much about religion. Instead, there is much to be gained by looking at it as a colonial situation with changing social identities and power structures. This is evident by the prevalence of hybridisations in the archaeological material.Some of the material categories that show the clearest example of changes are the burials from the 9th century up until about AD 1200. This is exemplified by two different Iron Age burial sites in Stockholm county, Uppland, Sweden: RAÄ 59, Valsta, in Norrsunda parish and RAÄ 40, Lilla Ullevi, in Bro parish; They both show hybridisation by involving older elements with newer ones during a time period when the church was not quite established in the region yet.The Christianisation of Sweden is a colonial situation, but the research tradition has often also used a colonial lens from the 19th and early 20th century in its approach to the period. This means that the same questions, interpretations and conclusions, often based on written sources, have been continuously reused for a long time, which has had consequences for the archaeology in Sweden..

This master thesis studies how much the cycle time, i.e. the time it takes for an industrial robot to perform a given task, can be reduced if an extra degree of freedom (DOF) is added to the robot system. The extra DOF consists of a linear track, which is supposed to be used in an optimal way. The problem has been studied using simulations in the robot simulation tool RobotStudio. To be able to run an optimization in Matlab, with the RobotStudio simulation cycle time as the object function, communication between Matlab and RobotStudio has been set up with an interface written in Visual Basic.

This degree project was conducted in collaboration with Gremo AB located in Ätran.The aim of the project was to develop a solution to secure quality and to help assemblingthe locknut holding the vertical hinge on the harvesters and foresters from Gremo.At this time the nut is assembled manually by the aid of an overhead crane. The nut istightened differently from time to time, and there was no specified torque to which it istightened. Another present problem was the locking washer which sometimes getsdamaged during assembly, when this happens the procedure has to be started over fromthe beginning. The current assembly procedure is very time consuming and lengthy forthe employees.Our task was to design a machine that could tighten the nut to a specified torque with amargin of error of ± 3%. The assembly procedure will be held simple and the timerequired at a minimum.The project started by developing several principle solutions, the one solution that bestmatched our specifications were developed to a primary solution.Today we have started manufacturing and assembling our prototype.

AbstractBuilding Information Model/Modeling/Management (BIM) is a tool that allows for efficient working methods. BIM saves time and money while providing the potential for visualization. This method of working is based on a 3D-model, and then a fourth and fifth dimension are connected. 5D modeling means that a spreadsheet creates cost estimates based on the 3D model. This provides opportunities to carry out calculations in the early stages of the projects. Calculations are currently performed manually and do not contribute to the development that the construction industry requires.