The purpose of this report is to find a model of statistics for construction and demolition waste, which makes it useful for the local manager at the building site. The intention with the model is that it will be used as a support of the local manager, to direct his project towards reduced strain of the environment. The model will also be used to make it easier to control that the claims from authority and aims for the environment are achieved. To familiarise with the subject waste handling within the building and construction sectorI have done a literature search. I have also been studying rules and regulations regarding the waste handling.

In our everyday life we are faced with many choices that have consequences on the environment. One of these is the food we choose to eat since food production has a big impact on the environment. In organic production the aim is to have a natural production process, where environmental impacts are minimized. By choosing organic food it is therefore possible to contribute to a better environment. A large number of meals are served every day in the public sector, which makes it an important player in the consumer sector that could make a major difference for the environment..

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

Calculations are an important part of planning around a construction project. From concept to completion of the project calculation is a tool to try to predict the actual cost. During the production stage in particular, deviations occur which makes the actual cost different from the calculations.This thesis is done in collaboration with JM Residential Stockholm. The study includes a cost follow-up in which a comparison was made between the calculated production cost and actual cost for the five projects. The aim of the study was to observe the most common reasons that a project deviates from the calculated production cost and then summing these causes in a number of categories.

The aim with this Master's thesis is to study the debate that takes place in the local community when a public library branch is threatened by closedown through the local newspapers. Through this it is our aim to understand why the debate takes place, and why so many people gets concerned with it. By relating this debate to contemporary research of library- and information science, and the discussion in three major Swedish library journals, we have found the answers to these questions. By studying the debate, we found six subjects that where essential for this study. These were Politics and economics, Urban and rural districts, Democracy and accessibility, The service of the library, The meeting place and To replace a closed down library.

The municipality of Olofström is intensifying the co-operation with Sölvesborg and Karlshamn, the two other municipalities in the west of Blekinge. They co-operate in two local federations and for the moment negotiations are going on about a third local federation in continuation school, but the municipalities do not agree. The aim of this thesis is to examine why Olofström co-operate with Sölvesborg and Karlshamn, if there are any problems and where the limit of this co-operation is. The method in the thesis is qualitative interviews with local politicians and officials and an actor-structure-perspective is used. The result shows that Olofström is a municipality where the population is decreasing, and it has lost state subsidy during the last decade.

In this study we have investigated how local journalists in Kalmar think when they choose their sources to interview. We have also studied several factors that can affect their choices of sources.We have interviewed eight news journalists from the two largest local news papers Barometern and Östran in Kalmar.The journalists were asked about the sources they often use as interview objects. They were supposed to tell about how they think when choosing sources and define which sources they commonly use. There are different factors that can affect the choices and we have narrowed them down to ethics, source critics, credibility, stress, hard production conditions, public and their own interest and if they consider themselves to be individualistic or controlled by the news desks. Furthermore the journalists were asked to characterize what changes they would make when choosing sources in a perfect world.All of the journalists had not reflected prominently on the subject of sources before our research.

The hybrid larch (Larix x eurolepis Henry) is a fast growing tree species and was introduced in Sweden for about 50 years ago. The high growth and expected resistance to diseases are probably the main reasons of introducing the tree species into the Swedish forests. The purpose of this thesis was to document the production of hybrid larch planted in the Snogeholm landscape laboratory and to compare the production in the pure hybrid larch stand with the mixture together with pedunculate oak (Quercus robur). The data collection in Snogeholm since the establishment has been carried out by the Swedish University of Agricultural Science (SLU). The fieldwork for the thesis was carried out in 3 stands, containing hybrid larch, pedunculate oak and a mixture of hybrid larch and pedunculate oak, in order to be able to compare the total stand production of the areas. The results show that the total production of hybrid larch in the mixed stand only is 35 % compared with the total production of hybrid larch in the pure stand. Therefore, the hypothesis that the total production of hybrid larch is equal to the planted mixture with pedunculate oak was rejected. The other hypothesis that the total production of a 2 hectare large stand containing a mixture of hybrid larch and pedunculate oak would be greater than the total production of two pure stands of 1 hectare containing hybrid larch and oak each was also rejected. In the studied case the total production was 45 % greater if hybrid larch and pedunculate oak was planted in pure stands. The results from the case-study only indicate that the total production of hybrid larch and oak under the investigated conditions can be higher when planting the two species in pure stands compared with a mixture of the two species.

Sheep breeding contributes not only with wool, hides, meat and milk but also with openlandscapes. The sheep?s wool is a good raw material thanks to a lot of different qualities as itis water rejecting and easy to form. The wool production today is concentrated to specificplaces in the world which leads to environmental problems and a distorted market. InJämtland, a province in Sweden, there is right now a staking going on for Local production andrefining of wool in a project called Ullforum.

A debate on environmental issues and food safety has been ongoing in Sweden and it is suggested that consumers' are seeking local produce instead of global and exotic foods. Moreover, studies show that the consumers? positive attitude towards local produce does not reflect their actions. The purpose with this thesis is to contribute to a better understanding of the dissonance between the consumer?s attitudes and actual behaviour towards local produce.

AbstractLean production has become one common concept within industries to make the work more effective and to meet today?s hard competition. A challenge for Chinese production is the threat from new low cost countries. It will become very difficult to succeed to produce to a lower cost than these countries; this led to that Chinese companies must develop new strategies, according to Lee and Zhou (2000). This will put China in front of new challenges and new strategies can be needed to retain their strong competitive advantages.

Some MNEs encounter frustration or failures when they enter a new market. The main reason is due to a lack of adaptation. There is a lack of theoretical study about the local adaptation phenomenon of Swedish MNEs in China. Most studies are at the level of experience. Therefore, the purpose of this study is to find out the dimensions subject to local adaptation and their degree for the Swedish MNEs in China.

The subject for this thesis is to examine the portrayal of the local farmer in four different museums in Scania. The purpose is to examine these two questions: 1. Which narrative and museal strategies are used in the portrayal of the local farmer by the local history societies? 2. How do the actors of the local societies relate to the living conditions and hierarchies of the rural society of Scania? The source material consists of guided tours and text material from the museums. The theoretical fields consists of history culture, use of history, historical narrative, museology and rural science act as our theoretical fields. Peter Aronsson, Anna Eskilsson and Maria Bjo?rkroth act as our main theoretical framework. Our research presents two central discourses in the portrayal of the local farmer.

This graduation work is a result of implementing Lean Production using OEE and SMED at Enics Sweden AB in Malmö. Enics doesn?t have an established improvement concept and therefore should this work serve as an introduction to possibly start with Lean Production. A result in this report is that an OEE value has been identified within a common order at Enics. Other results are that an implementation of a Lean-board has been implemented and furthermore, within SMED, a flag that indicates changeover..

When a company in the manufactory industry makes costly investments, it's important that these are used as much as possible. The company in this case claims that their invested robot cell, with CNC machine isn't used enough. The questions here are: How can we improve the use of the robot cell? Which products are appropriate for the production in the robot cell? As a method to come to a conclusion, an analysis has been made over the manufactured products. And also interviews with machine operators and the production management.