The first of May 2007, a decision from the Swedish Board of Fisheries about a Swedish prohibition of eel fishery got legal force. This prohibition is one of the most challenged decisions that the Swedish Board of Fisheries has taken. In the town Karlskrona in the southeastern part of Sweden the prohibition has got a lot of attention in local media. Early in the debate, it was clear that the actors active in the archipelago of Karlskrona were against the prohibition. The aim with the master thesis is to investigate different actors' opinions and view of the prohibition of eel fishery, today's management of the resource and how the actors' think that the communication between the actors involved in the management of eel and eel fishery works and what need to be changed to be able to develop a sustainable management of the eel in the future.

An increasing global tourism offers great opportunities for Sweden as a tourist destination. However, an attractive destination requires competitive destination marketing strategies. Tourist destinations often include a complex network of stakeholders of small and large en-terprises that represent both the public and private sector. One condition for successful des-tination marketing is that all of these stakeholders collaborate in their marketing to create an integrated and powerful image. Another important aspect in terms of increasing the des-tinations competitiveness is that the local tourist companies are "export-oriented", in order to ensure that international tourists are looked after appropriately.This study has focused on the destination marketing of Stockholm.

The purpose of this master?s thesis was to find problems that occur in the production line at Atlas Copco Rocktec Division, in order to decrease the costs of defect in quality. When the problems were distinguished, the authors ought to choose the problem with the highest improvement potential. One request from the constituent at Atlas Copco Rocktec Division was to connect the improvement to the document The Way We Produce. The document provides information and values about Atlas Copco and consists of 10 principles to be able to reach their vision.

This work is meant to show how memory can work within a smaller society when it comes to folklore and local history. What is remembered, how it is remembered and why it is remembered. Sprung from the older collections of folklore within the selected area - which is Glaskogen in western V?rmland - the purpose is to look at different types of memorizing and how it can work. The purpose is also to analyze some of the folklore from Glaskogen via narrative analyzing methods of Palmenfelt, Labov and Young, and also to understand Glaskogen from a cultural heritage perspective, looking at the valuation process and attitude towards the immaterial heritage.

The aim of this thesis is to investigate the local debate on the Music library in Västervik to see what arguments, pro et contra, that constitutes it. Since its opening the Music library has faced regular threats of being closed down. This is an issue interesting due to several factors, its lack of guaranteed public funding and relative importance to Västervik´s attempts at city branding being two. Using argument analysis, the thesis proposes that the local debate shows traces of both instrumental and culture centered, intrinsical views of the Music library, and that the instrumental view holds both negative and positive poles of opinion while the intrinsical counterpart is one-sidedly positive. Further, the thesis argues that this is in line with a long since documented shift in cultural politics towards a more market oriented discourse..

The structure of the thesis is based on opportunities to attract businesses to the region, the need of establishments in the region and benchmarking with establishment strategies of other cluster initiatives. The identified opportunities are the local business relationship with ABB, the prerequisites of life quality in the region and the availability of financial support. Further on has a number of opportunities to be developed been identified; diversification of the existing businesses, an expansion of the cooperation with universities and to simplify the contact with local authorities. Challenges that HVV is facing is: creating a more dynamic labor market, secure long-term labor supply, spread the image of the brand HVV and finally putting HVVs geographic scope. Two of the identified needs of establishments are strategically important: to establish a third-party logistician and commercializing systems for distributed generation and energy storage.

The purpose of this thesis is to analyze the design and function of an engine production management?s control system and its intended function, and to contrast it with the present management control systems in use on an operational level. Interviews conducted with employees from all levels of the engine production are the main source of this study?s empirical foundation. Information has also been gathered from relevant written material such as annual reports, internal documents etc.

Bakgrund: I takt med att konsumenters preferenser har förändrats, har företag fått överge massproduktion till förmån för produktionssystem som bättre avspeglar konsumenternas ökade krav på flexibilitet. Ett sätt för att överbrygga denna utmaning är att implementera lean production. Även om detta sätt att producera på har tydliga fördelar för dagens företag, verkar lean production även kunna medföra problem i avseende på att kombinera med den befintliga, i många fall, traditionella styrningen i företaget. En del av styrningen som verkar vara speciellt svår att kombinera med implementeringen av lean production rör mätningen av produktionen. Vid en närmare granskning visar det sig att det råder vissa motsättningar mellan traditionell mätning och lean production som kan påverka företagets beslutsfattande negativt.

Induction motors, often referred to as the workhorse of the industry, play an important role in production today. Therefore, it's important to diagnose any faulty induction motor prior to failure to avoid costly and time consuming production stops.This thesis compares methods for diagnosing induction motors in operation, MCSA, Park's vector approach and the standard method used by Swedish industries today. By simulating broken rotor bars and short-circuit in one of the windings, each method is tested and the results are compared using matlab.The results need further verification due to uncertainties of the condition of the test motor, even though the experiment gives a hint of the different advantages of each method. A combination of the methods should be able to tell if the motor needs further examination..

During the last year?s Swedish agriculture have had difficult times, with decreasing prices and at the same time increasing production costs, which has led to bad profitability and faith in the future. The dairies in Sweden have also had a rough time and there have been large rationalizations during the years. In the beginning of the 20th century there were almost 1700 diaries in the Swedish countryside. There has been a large technical development during the 20th century resulting in a decrease in diaries to only 46 in the whole country today. They are owned by 15 diary companies, of which 7 large and dominate on the market and the rest are small-scale companies. With this development the confidence and feeling for the diary companies also has decreased.

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.

AbstractTitle: The Sweden Democrat is coming! ? A quantitative study of the framing of the Sweden Democrats in the local press during the month of the parliamentary election in 2010 (Sverigedemokraten kommer! ? En kvantitativ studie av hur Sverigedemokraterna gestaltades i lokalpressen under månaden för riksdagsvalet 2010)Number of pages: 41 (42 including enclosures)Author: Tobias EnefalkTutor: Amelie HössjerCourse: Media and Communication Studies CPeriod: Autumn 2010University: Division of Media and Communication, Department of Informatics and Media, Uppsala UniversityPurpose/Aim: This essay seeks to study how the Swedish political party the Sweden Democrats was framed in Swedish local press during the month of the parliamentary election in 2010. The study is based upon eight local newspapers located in the municipalities where the voting result for the Sweden Democrats increased the most and the least.Material/Method: The material consists of 263 articles from eight different local newspapers gathered from the month of September 2010 (the month of the election). Using a quantitative content analysis and a cluster analysis inspired by Matthes & Kohring, a comparison of the framing is made between the different newspapers. The results of this comparison are then analyzed and discussed by applying theories of political communication, media logic and framing.Main results: The results show that some similarities and some differences occur regarding the framing of the Sweden Democrats between the different newspapers.

My aim in this case study has been to create a method for creature design to test this method in a production and evaluate the results. To achieve this I studied and analyzed the methods of three concept artists and illustrators named James Gurney, Neville Page and Iain McCaig. From the analysis of these artist´s methods, combined with my own personal experience, a new method was formed. To test this method a creature was designed based on directives given by a game design group in the process of creating a table top role playing game in a fictitious world. These directives where given for the creature´s role and its living conditions.

Emission of nitrogen oxides as well as carbon monoxides is an inevitable result of combustion. A Swedish law "Law of environmental fee for emissions of nitrogen oxides as a result of energy production" (lagen om miljöavgift på utsläpp av kväveoxider vid energiproduktion (SFS 1990:613)) controls the emission of NOx from energy production by a system of fees. The system has resulted in a strong approach toward less emissions of NOx among the energy production plants. High emission levels, today exceeding 52 mg/MJsupplied fuel, leads to costs for energy production companies. This paper examines possibilities to reduce the emissions of NOx by optimization of the SNCR-technique in a biofuel fired heat and power plant.

In my work I have chosen to examine the profitability for small scale production of hemp briquettes. My study also includes a review of which briquette technique that is the most common one among small scale producers. The reason that I have chosen this subject is because of the discussions about climate and energy that we face almost every day. I also think the subject is extra interesting in these days when the grain prizes are at a historic high level. In order for me to achieve a reliable report, a hemp and briquette producer has given me the actual data from his farm. In that way I have been able to make my calculations from a concrete perspective.