Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

The industrial sector accounts for a large share of greenhouse gas emissions. To reduce its negative impact on the environment is crucial in the quest for a sustainable future. In discussions of the industrial sector's impact on the environment guidelines have been highlighted as a tool to assist the industries in their efforts to change the relationship between the consumption of energy and production. This by improving energy efficiency and a shift to the best available technology. During the past 30 years the steel industry has reduced its energy consumption per ton of steel produced by 50 percent.

Examensarbete, civilekonomprogrammet, Ekonomihögskolan vid Linnéuniversitetet, ekonomistyrning, 4FE03E, VT 2013Titel: Lean Productions påverkan på ekonomistyrningen - En fallstudie inom Gnutti   Powertrain ABBakgrund: Allt mer konkurrensutsatta marknader har inneburit att företag sökt nya sätt att utveckla och effektivisera sina verksamheter. Detta har resulterat i att många företag valt att införa produktionsstrategin Lean Production. Flera forskare har påvisat att den traditionella ekonomistyrningen inte är anpassad till och lämplig för företag som använder produktionsstrategin Lean Production. Detta har inneburit att den traditionella ekonomistyrningen måste förändras och utvecklas för att kunna stödja de förändringar som den nya produktionsstrategin ger upphov till. Därmed blev det intressant att studera ett enskilt fallföretag för att identifiera om och hur detta företag har förändrat sin ekonomistyrning till följd av användandet av Lean Production. Syfte: Syftet med denna studie är att utifrån det enskilda fallet Gnutti Powertrain AB bidra med en förståelse för hur ekonomistyrningens utformning och användning påverkas av användandet av den avancerade produktionsstrategin Lean Production.

The present study discusses the political integration of immigrants in local government in the muncipality of Växjö from 1971 to 1991 in the form of representation. The main data source consists of lists of people holding local commissions of trust in the various boards and committés appointed by the municipality council, as well as in the council itself. These data are then compared to population statistics from Statistics Sweden. Main findings of the study are that immigrants are insufficiently represented in relation to their proportion of the population. It is suggested that this is a result of structural discrimination and possibly insufficient socialisation..

The municipality, of Gatukontoret in Local government of Borås has in the long run, a required need to look after the current heating devices (the gas production plant) in sewage treatment plant, called Gässlösa. The practical work of the examination is about, trying to find a better way to take care of the current heat recovery. That may be one way or another, rather easy to implement in the existent construction.Through the work to increase the efficiency of the gas engine, implement of some external cooling system by heating exchange device. That gives an opportunity to heat (primary) the digester, (but even all internal public areas) with its own superfluous heating.The report shows that if the management group may invest 422 704 crown to implement a heat exchanging device, it gives more space to reduce the need to buy expensive external energy. Gatukontoret´s pay off time, for buying machines, is 20 years, with reservation to calculate with 4 percent internal interest, leads to the yearly mount of 31103 crowns.If Gässlösa increases the gas engine time in (effective) duty approximately (correspondingly) 48 hours a month the entire investment will generate a profit in January in year seven after the implementations.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

The Sheep is the oldest livestock, and has been in Sweden for 4-5000 years. Thanks to that you can obtain skin, as well wool and meat. Therefore it was an important animal. Sheep production has increased, strongly lately due to the pasture support. The purpose of this paper is to find out what kind of different EU-subsidies you can get and to compare the subsidies in Öland and the main land. Sheeps are very good conservationist with grass, bushes and herbs, because of different grazing lands hardness and growth is it important to control the pasturage strain. A good way to regulate this is to have different enclosed pasture to switch between. I have been studying the different EU-subsidies.

Farmers are constantly facing changes, and the exposure to risk requires monitoring these changes. Financial risks, institutional risks, market risks and production risks are the different risk categories that the farmers face. Production risks stems from factors the farmer cannot affect or is beyond his control. The crop?s output is the basis for the primary income of agricultural operations, which is why it is important for farmer to manage their production risk. A tool to reduce the consequences of production risks is crop insurance.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

This thesis work was made for Södra Cell Mörrums bruk in Blekinge. The purpose of the work was to develop a computer model in the simulation program Extend for the removal and balance of organic oxygen consuming substances, measured as COD (Chemical Oxygen Demand), in the new biological treatment plant in the mill. The plant produces two different pulp products, TCF- (Totally Chlorine Free) pulp and ECF- (Elementary Chlorine Free) pulp, for sale. The different bleaching procedures affect the characteristic of the wastewater and thus the effectiveness of the biological treatment plant.In the model that was developed the COD in the wastewater was divided into five different COD-fractions: soluble easily degradable (SS), soluble hardly degradable (SR), soluble inert (SI), particulate inert (XI) and particulate biomass (XB). To create the model FlowMac? was used as a base.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

Syfte - Syftet med studien är att få en djupare insikt i sambandet mellan ledarskap och de faktorer som bidrar till ökat engagemang hos medarbetarna i arbetet med ständiga förbättringar. Studien riktar sig mot ett mellanstort industriföretag som implementerat lean production.Design/ metod - I vår undersökning valde vi att göra en kvalitativ fallstudie. Data samlades in i ett svenskt industriföretag. Totalt har 7 intervjuer genomförts.Undersökningsresultat - Resultatet vi kom fram till är att medarbetarna är i låg utsträckning delaktiga i förbättringsarbetet. Tidigare forskning visar att medarbetare som är delaktiga i beslut är också mer engagerade i arbetet.Metodkritik ? Resultatet speglar enbart subjektiva bedömningar och de studerade variablerna bygger på respondenternas uppfattningar.

The development of solar photovoltaic (PV) is increasing,with declining module prices and with a strongenvironmental profile. Policies are developed around theworld to achieve the targets set for renewable energy.In Helsingborg, the local power company Öresundskraft isworking with solar PV to achieve the goals of the city.With their vision: - Energy for a Better World and Powerfor the Region, their work with developing the local solarPV market is continuing and the next step is to create asolar PV policy. Today their offer is 1 SEK/kWh for theexcess electricity delivered to the grid.It turns out that compensating the customer is a vitalpolicy and it has to be dynamic to follow the decisions ofpolitics. The same survey shows indeed, thatenvironmental and technical part is of interest. Solar PVwill be supported locally to act on environmentalsustainability and locally produced electricity and withthis Öresundskrafts vision will be achieved..

This thesis investigates lacks in today?s use of the ERP-system Mapaz Affärssystem inthe production planning at Solna Pressgjuteri, and possible improvements. Today thedates calculated by the program to plan the orders are inaccurate and the ordersequence is not optimal, and therefore continuous manual corrections are needed.The approach was to study the program Mapaz to understand how it works, andidentify available parameters for input and output in the different tools offered in theprogram. By studying old lists of planned orders and relevant parameters in Mapaz forindividual orders, production groups, products and operations, the connectionbetween input and output parameters could be understood.Participating in planning meetings and discussions with the company behind theERP-system identified the current usage, desideratum and possibilities with theavailable tools. These were then matched to describe the reasons to the insufficientplanning and form possible actions for improvement.The work has showed poor understanding for the ERP-system and its functions, assome tools intended to assist the planning were not used, and some even usedincorrectly.