Although Lean has received an increased amount of attention in the service context, research still has not established how successfully Lean manages to increase service productivity; since service productivity consists of both efficiency and quality. Research regarding productivity discusses the risk of a tradeoff between efficiency and quality in service production processes. Therefore, this thesis aims to explore if the tradeoff in a production setting with low variability in demand and low customer participation exists, after Lean has been implemented. With a qualitative approach, a case study has been conducted at Scandinavian Airlines Ground Handling to evaluate the effects of Lean in the baggage handling process. The result of the study shows that the tradeoff has not been overcome; efficiency has increased at the expense of quality.

Abstract This report is our bachelor thesis. Our work has taken place at a galvanising company in Sölvesborg. The company faced major changes, of which one was a computerisation process. The new system could involve changes in work practice and in specific tasks, affecting the workers. If the coming system was to support work, from the production personnel?s perspective, we felt a legitimate participation in the development and design of the future work practice, was a requirement that was not met.

This degree project is a realization of a strategy for collaboration between an industrial designer and employed workmen of a producing company. The collaboration aims to engage everyone involved in the co-authorship of a products design and manufacturing history. The realization has taken place in an open dialogue where the designer no longer owns the design process by himself. The project has been carried out in cooperation with the company Iris Hantverk. The company is owned by the Swedish body for visually impaired and has their main production facility in Stockholm.

This is a case study of Carlstad Comic Con 2011 and 2012.The purpose is to study the event in relation to a project management and a local culture policy perspective. This in order to analyze the organization of a popular culture event and see how such a local event may benefit Karlstad as a city. Besides studying the organization of Carlstad Comic Con and its outcomes I am sketching a short cultural history of popular culture media and its context within recent year?s globalization.The study shows that the events have had a great beneficial impact on the local industry; lacking any negative sides, and have put Karlstad in an international context which goes directly in line with the standard guidelines for project management of region culture policy. Concerning how to organize the event the organizers have not followed a strict project structure.

This is a bachelor thesis that studies and discuss the question: How can we develop our individual narrative technique with sound design in a Swedish drama production? We have done research and empirical studies. We have analyzed movies to get an idea how we use the sound design in Swedish drama productions today. We have produced a movie that gives sound the biggest part. Key words: Swedish drama production, narrative technique, sound design .

This project is a learning CD-ROM production aimed at first-time parents. It is using both sound and images, moving as well as non-moving. The purpose of the production is to be an interesting alternative to traditional books. We have been looking at similar productions like drivers license educational CD-ROMs and encyclopedias for inspiration and ideas on how to proceed. In order to give the content some dynamics, we've also added the element of 3D-animated sequences.

Att införa lean principer inom sjukvården är ett relativt nytt område. Landstinget i Gävleborg och Gävle sjukhus är intresserade av att korta ner sina vårdköer med hjälp av logistiska metoder och lean production principer. Detta på grund av att vårdköerna på bland annat urologmottagningen på Gävle sjukhus bara växer. Lean production är ett koncept som ursprungligen härstammar från bilindustrin i Japan och innebär att man strävar efter att göra mer med mindre. På svenska kan lean production översättas till resurssnål produktion och arbetet med lean innefattar principer som kunden i fokus, teamarbete och ständiga förbättringar.Syftet med examensarbetet är att ta fram en arbetsmodell för införande av lean principer inom sjukvården, då vårdköerna idag är långa och någon form av förändring är nödvändig.

The demand for biogas as vehicle fuel has risen sharply and there is a great need for increased production. A possible addition of vehicle gas can be produced by upgrading landfill gas which is formed by degradation of organic waste. This thesis investigates the potential of producing vehicle fuel from landfill gas in the region of Biogas Öst.In 2008, an amount of 32 million Nm3 landfill gas was extracted in the region. This level can be maintained for another ten years if the efficiency of gas extraction is improved. The annual production will decrease with time since landfills aren?t allowed to receive more organic waste.

This thesis calculates and compares the values of improved environmental quality due to future possible investment alternatives in biogas production facilities at Käppalaförbundets Reningsverk (Käppala Sewage Treatment Works) in an attempt to determine which alternative yields the highest such value. Käppala faces three investment alternatives for the usage of biogas. The alternatives are production of vehicle fuel, district heating and thirdly, heat and power production. Estimates of the value of environmental change are calculated for each of the three investment alternatives, and these estimates are then compared. The environmental change in question is the change in discharge levels of carbon dioxide (CO2), nitrogen oxides (NOx), sulphur dioxide (SO2) and particle matter.

Although being recognized as holding great cultural-historical significance by local officials, numerous parts of the functionalistic development along Friggagatan became demolished in 2008.This bachelor thesis have surveyed how the planning process proceeded through various municipal committees, and moreover, how different interest groups gathered around certain discursive attitudes. As a consequence of various paradigm shifts in society, e.g. that local government gradually are depending on private economic initiatives, there are to some extent a fear among politicians that cultural-historical demands can risk economic growth.Nevertheless, a building or a development are in fact bearing different value-perspectives, such as economic, functional and cultural-historical. Due to the fact that the heritage-sector has limited resources, in combination with sometimes vaguely and obsolete conservation documents, the sector have difficulties of responding common economic arguments, which leads that the real estate-owner gets total interpretative prerogative.However, despite a sometimes suspicious political attitude towards an improved conservation document, e.g. with continuously updates concerning a building?s technical and economic status, there are some political initiatives working towards it..

The purpose of this study was to examine the goals, possibilities and rationales that could be found in the discussions concerning the digging of ditches by governmental subsidiaries in order to drain the peat bogs of late nineteenth century Sweden. A further aim was to look at the effect on the landscape on a local level i.e. Släthults moss in Bäckaby parish, Småland in the south eastern part of Sweden. In order to be able to explain the connections between politics and landscape changes in a local population and its deciding bodies, influenced by ideas, science and production, a quadruple helix model developed from a triple helix model by Björn-Ola Linér was used. As a model of environmental history, three step thought was used, borrowed from Donald Worster.

When the storm Gudrun hit Sweden on the 8th and 9th of January, many recreational forests in southern Sweden blew down. For this reason there is a demand for new regeneration methods as to how these storm-felled areas should be regenerated and with what species. In this study the forest is divided into three areas: production, recreation/production and recreation. The first area is a forest with production as main goal and these kinds of forests are located a bit from the city. The second type ? recreation/production forest ? has two equal goals: production and recreation, and is located close to the city.

This rapport examines six Swedish workplace unions, in manufacturing internationalised companies, degree of internationalised trade union work. The report is based on interviews with local shop stewards. All local workplace unions were in some form internationalised. They were placed in three different groups of strategies: Passive, Tactical and Strategic. The Passive union only tried to get information; the Tactical unions were reactive against initiative from company management and used the channels provided of Industrial Relation laws.

Käppala wastewater treatment plant situated on the island of Lidingö northeast of Stockholm is running a project during 2004 and 2005 with the purpose to map out the capacity of anaerobic digestion in the digesters that treat primary and excess sludge. The purpose of this thesis work, which is part of that project, was to characterize the present anaerobic digestion process and to investigate its capacity to treat other organic wastes such as restaurant waste and waste from water works. To decide the potential of both methane and biogas production from different substrates batch laboratory tests were carried out. To imitate the anaerobic digestion process at Käppala continuous tests with small scale reactors were carried out. These reactors were later fed with restaurant waste.The batch laboratory tests showed that primary sludge had a potential biogas and methane production of 0,62 and 0,35 Ndm3/g VS respectively after 40 days of digestion.

This master thesis is performed at Scania Axles and Gearboxes, a production plant located in Södertälje. Within the plant axles, gearboxes as well as central gears are assembled from components to finished products. All production is conducted on production lines, with a pre-determined rate, which is supplied with components by the material handling department. Since the production quantity and the mix of product variants produced on the production line is customer order-based, the number and type of components needed for production as well as appropriate staffing within the material handling department is difficult to predict. Scania is currently using a number of different resource planning tools for each material handling-department within Axles and Gearboxes to visualize the workload within the departments.