Due to soft grounds in combination with seasonal variation in soil humidity, there is a lack of stands that are possible to cut during spring and autumn in some geographical regions. For Holmen Skog this sometimes means that a large proportion of the contracted private forest is cut during the winter when the ground is frozen. One consequence of this is that the proportion of winter stands in the stand bank of own forest increases while spring and autumn stands becomes a scarcity. This in combination with milder winters, especially when there is a long period of reduced bearing capacity in spring or autumn, means that the situation rapidly can become critical. The overall goal with this study was to generate basic data for decision support in the work to achieve a sustainable distribution between own forest and contracted private forest in the stand bank. The study took place at Holmen Skog, district of Umeå, during autumn 2007 and was based on interviews and an analysis of harvest planning and delivery data. The study showed that there is a problem with how the cutting is distributed between own and contracted private forest during the year and that it foremost is the proportion of winter thinning of own forest that has increased in the stand bank.

The purpose of this report is to simplify the process of designing carbon fiber strengthening for existing concrete constructions, specifically beams. The intention has been to establish a flow chart containing information on the necessary testing and calculations for the design, to as far degree it is possible satisfy the requirements stipulated by Swedish and by extension, European authorities.To do this the report will examine a parking garage situated underground by Akademiska Sjukhuset, Uppsala. The parking garage was built in the mid-seventies, and has in recent years been subjected to a greater load than designed for by the construction of a road on top of it. FEM-Design has been used to obtain the internalforces of the beams and thereby determine whether they are in need of strengthening or not and thereafter design the strengthening according to Täljsten (2006) with some corrections from Täljsten (2011) due to new regulations.The result of this report is that the flow chart used is viable to design carbon fiber strengthening, atleast with the conditions met in our reference project.The conclusion drawn after working with this report is that there is a need for a clear standard for carbon fiber strengthening , preferably a standard that can be used throughout Europe..

A common way to stabilize high rise buildings is to use an elevator core built of concrete. Today, we use to build these elevator cores of in-situ concrete. Precast concrete twin wall (double wall) is a semi-finished product that has become more common in recent years. This diploma work studies how the twin wall works out as structural elements in an elevator core. The work also shows some possible ways of designing twin walls and highlights some important parts of the design that will be vital to the stability of the building.    The result shows that it is important to think through where the element joints should be placed.

The purpose of this study was to examine and try to understand the physical environment focusing on the fenomena of scribble and damage at a high school. More specifically its aim was to find out how the pupils themselves discribe their physical environment, the reasons why there are scribble and damage at their school and how they are treated by the adults at the school bearing in mind the scribble and damage that occur. The study took place at one high-school in the southern of Sweden and the methods used were six qualitative interviewes, a minor inquiry in six classes, fotographing the physical environment and putting up scribble boards on the pupils' toilets. The physcial environment was quite bare and monoton and the pupils often felt bored by it. There were few places where the pupils liked being at.

Background: Triage is the sorting of patients according to the severity of medical assessment. Triage has a long history of use in Anglo-Saxon countries but is a fairly new method in Sweden. Researchers have described the Manchester triage group method (MTS) and a literature review of the concept; working contentment and competence focusing on triage. Aim: The ambition with this study was to describe a number of triage nurses working conditions. The research questions were; working with MTS- does it bring work contentment? What kind of competence is needed? Method: Data was collected from 74 triage nurses by a questionnaire containing 37 questions and two questions provided the nurses the opportunities to describe their triage experiences.

The family and relatives caring of older people in Sweden lies on an old tradition. By legislation the responsibility for the older people has gone through a development from the family to the society. According to the new social service law (2000) it is not that clear that the utmost responsibility lies on the society. According to the social service law ( 5th chapter, 10 §) the municipality should ease things up by giving support and relief for relatives taking care of older people, prolonged ill and function disabled people. The purpose with the study was to examine how the family care givers are finding their everyday work and their experience of the support that the society is giving.

The aim of the study was to investigate social workers and managers experiences of ending child welfare investigations within the statutory period of four months. We also investigated their experience of investigation time is used in practice. To get answers for our purpose, we conducted a qualitative study. We strategic selected three social workers and four managers to our interviews.The results showed that both social workers and managers have experience with child welfare investigations that are not completed within the statutory time. A township that departed had no experience.

This report describes the development of a sample loader for my diploma work at Q-linea AB in Uppsala. The sample loader will replace the process of loading fluid samples into Q-linea?s instrument for biomolecule analysis. The earlier process was done by hand and was a time consuming and inefficient task.The work was initiated with a design phase where an overview of the system was created. The sample loader will be receiving text commands from a PC that coordinates all the subsystems like pumps and lasers on the analysis instrument.

This thesis is the result of the investigation and solution of a mechanicalproblem regarding flywheel malfunctions. A flywheel is, in short, a devicethat relies on a rotating object?s moment of inertia to store energy overshort time spans. This project is part of the development of a fourthflywheel prototype at the division for electricity at Uppsala university,which uses magnetic levitation to keep a hollow cylinder rotating at veryhigh speeds inside a vacuum chamber. Should the magnets fail however, orsome other error occur that leads to an uncontrolled state of rotation, thecylinder needs to be stabilized mechanically by a device usually referredto as ?back-up bearing?.

Syftet med uppsatsen är att undersöka befintliga trähusproducenters förutsättningar och intresse att bygga flerfamiljshus med bärande trästomme med fler än två våningar. För att nå vårt syfte har vi satt oss in i marknaden för höga trähus. Detta har vi gjort genom att initialt betrakta dels marknaden ur olika intressenters perspektiv, dels genom att undersöka företagen som finns på marknaden idag och placera in deras respektive byggsystem i en produktlivscykel. Vi har därefter satt oss in i marknaden för trähus och fokuserat på tio företag som vi har djupintervjuat. Vi beskriver sedan de samband vi ser mellan förutsättningarna på marknaden för höga trähus och intervjuresultaten.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

The expansion of the Swedish hydro power has contributed positively to the reduction of the environmental impacts from the fossil fueled power production. In the same time the extensive expansion has been proved to cause negative ecological and local environment impacts of a stream. This, in turn, has been affecting the biodiversity and fish stock negatively, which has been reduced. One of the underlying problems is the lack of possibility for the fish to pass the plants, but it is also directly correlated to the mortality rate of the fish passing through the turbine, which this study is investigating.The mortality rate has been computed for three different locations in Sweden, Untra, Tännfallet and a third one whose location is confidential, and is denoted as Case 1, 2 and 3. The model used to calculate the mortality rate in this investigation is based by existing blade strike models and knowledge and are investigating the death due to mechanical injuries from collision with a runner blade in the turbine.

The aim of this essay was to obtain an understanding about company owners thinking about the connection between having an own company, and the risks for an alcoholic abuse. The risk factor I was researching was stress, alcoholic culture, accessibility and rehabilitation.I have interviewed five owners of small companies, two women and three men, which represents four different kinds of branches. The theories I used in analysing the empirical findings where the theories of psychosocial work environment of Lazarus, Karaseks demand/control model, epidemiology- and culture perspective.I have found that the main stress factors for company owners where the economical stress and great load of work. The stress was also related to the fact that company owners of small companies often were alone with all the responsibility and problems.Women did not use alcohol very often as a tool to reduce stress. If individuals were using alcohol to reduce their stress, it also had to deal with their ability of coping and also what channels they had for coping..

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.