Today, we use BKR and BBK 04 when designing concrete structures inSweden, which will, in the near future, be replaced by Eurocode 2. When you are designing buildings, you will use Eurocode 2 Part 1-1 and with this new standard, some new rules and general rules will be necessary to adopt. To examine how BKR and BBK 04 tells apart from Eurocode 2 when designing concrete structures, one beam and one column with often common dimensions, is studied. The beam is designed with consideration of (considerate to) durability at bending moments, shear forces and control of cracking. The column is designed with consideration of durability at eccentric axial load and bending moments in cross section on account of (due to) geometric imperfections. BBK 04 has gone one step closer to Eurocode 2 than earlier editions and the things that are different, when calculating reinforcement, is how they use the partial factors.

Before the European construction standards were introduced in January 2011, it was mainly themethod in BBK04 that was used for calculating punching capacity in concrete structures, and in lesscommon cases the method in BHB. The method of BBK04 is easy to use and have had the samestructure since the first was published in 1979. The Concrete handbook method (BHB) where usuallyonly used when a higher punching capacity was needed and the cross-sectional height where fixed,calculations using this method entails more work, but will in return usually give a higher capacity. Italso allows the use of shear reinforcement to increase the cross-section capacity. The method ofcalculating punching shear in EC2 differs largely from the methods of BBK04 and BHB.

This bachelor thesis discusses various difficulties with architectural paint research. The difficulties are exemplified through a case study ? a paint research on a furrowed string-course in the southern vault of the Royal Palace of Stockholm, which was carried out November ? March 2009-2010 on behalf of Statens Fastighetsverk. The paint research was made in order to receive information about the string-course and to get inspiration for a renewed color scheme on it. The base material of the string-course is Gotlandic sandstone and the surface of it is furrowed.

Svenska Kraftnät is (together with the other transmission system operators of the Nordic power system) responsible for keeping balance between the generated and demanded power in the Nordic power system. Spontaneous load variations and system disturbances, however, lead to power imbalance followed by frequency variations. The frequency deviations can be limited to an acceptable level by the spinning reserve, mainly by hydro power control. But there are also other system properties which have a great influence on the frequency and system stability. The frequency and voltage dependence of the loads have a direct influence on the power balance.

In published studies it is found that the fuel consumption on a forwarder is relatively constant, on time basis. A certain variation between different sizes of forwarders occurs as well as between different working elements. The aim of the study was to establish a forwarders comparatively fuel consumption when driving on road and in the terrain, loaded and unloaded, with high and low gear and with high and low speed as well as with hydrostatic and hydrodynamic transmission. A hypothesis was that low rpm gives lower fuel consumption on distance basic, at all trials. The test driving was made with a Hemek 750 which is a three geared hydrostatic machine and with a Hemek 700 which is a hydrodynamic machine with six gears.

This essay comprises a study of the bridal crowns of Tjust, with respect to their national history, concept and aspect of mythological symbol. The tradition of bearing the parochial bridal crown is closely associated with religious medieval politics, and has also come to include elements of superstition and folklore. Attention is paid to these aspects dealing with the position of the bridal crown within current forms of tradition and culture and the impact on brides of this day and age. As the tradition of Church-owned bridal crowns is intrinsic to this country, and especially in the area of which Tjust is a part, possible solutions to the continued tradition are investigated..

The librarian profession is dominated by women. The aim with this essay is to find out howmen and women in this field get on together, and how they experience their psycho·social work situation bearing this in mind. Are there any advantages or disadvantages being a woman or a man in this profession? What do the librarians think about the future? Men and women working at five different public libraries, where the domination of women is greatest, have been interviewed. The essay is based on their opinions and experiences.The female and male librarian get on well with each other and have a good cooperation.There are not many advantages or disadvantages depending on the sex in the profession, but the image, status and salary would probably be better, if there were more men in the profession.

The different material layers as part of a road construction fill all a function so theroad becomes durable, safe, comfortable and aesthetically pleasing. Recently, anew group of construction materials started to play an important role in roadconstruction ? geosynthetics.This thesis addresses the two most common types ofgeosynthetics used in modern road construction, namely geogrids and geotextiles.The most common use of geogrids is reinforcement of poor subgrade by usinggeogrid soil reinforcement, which occurs when road material particles wedge inthe geogrid?s mesh. Geotextiles act partly as a barrier that prevents the finermaterial in the below ground from being mixed with coarser upper material andalso act as a load spreader.Road contractors often face a choice of whether geogrids and/or geotextiles areappropriate in a particular road project and also how much profit the choice mightbring. This phase in the tender calculation process is the intended scope of thisthesis.The thesis deals with both the "hard" cost-function aspects and the "softer" values e.g.

The purpose of this thesis is to describe the marketing channels Gen Y is exposed to, uses and is influenced by. The thesis also seeks to comment on whether there are other factors, in addition to the marketing channels described, which influence Gen Y in their consumption choices. In addition, we intend to develop knowledge about whether the generalizations of Gen Y have any bearing, or if they are only assumptions with no support. From the empirical results, we have seen a consensus among the respondents concerning which properties they want commercials to hold, but they differ in their opinions regarding which marketing channels the commercials should be distributed through. Overall, the respondents want the commercials to be entertaining, relevant to their interests, and they want to be able to choose themselves whet­her to take part of them or not..

The goal for this master thesis project has been to investigate the power quality in adistribution grid, which has a high fraction of dispersed power production due towindmills. The study has been done on a grid in Laholm South of Halmstad, whereapproximately 45 windmills are connected to the distribution grid owned by SHKEnergi. The investigation has been focused on to two radialy fed 20 kV lines, wheretwelve windmills are connected.Voltage variations have been studied by creating a model of the grid in the simulationprogram SIMPOW. The largest deviation that has been found in any point of the gridis ±1.9 % of the nominal voltage. This deviation is a result of varying powergeneration from the windmills and the voltage regulation at the connection point ofthe line.

The thesis presents an optimally designed kinematic structure for a new 6-DOF haptic devicebased on TAU configuration. The configuration of the TAU-2 proposed by Suleman Khan andKjell Andersson [1] was modified and its mobility was verified by using Grübler criterion tohave a 6 DOF. Analytical kinematic models for the inverse and forward kinematics weredeveloped for the haptic TAU configuration to determine a set of optimal design parameters.Kinematic performance indices such as volume of the workspace, kinematic isotropy and payload index, were defined based on the singular values of the Jacobian matrix. The Jacobianmatrix was scaled to homogenize the physical units. The Jacobian matrix dependent on theposition and orientation of the end-effector gives local isotropy and pay load index, so globaldesign indices were defined, which represent the performance of the mechanism in the wholeworkspace.

Emotron is a company specialised in developing, producing and marketing equipment to con-trol, monitor and protect processes and machinery driven by electric motors, with an applica-tion focus. Examples of uses for their products are fans, pumps, lifts and cranes.The project is to look at Emotrons end of line test. The company has seen that at the final test-ing there is a bottleneck that restricts the outflow and prevents an increase in the number of tested products.The purpose of this project is to review how Emotrons end-of-line test works today and if there is a possibility to make the test more efficient in such a way that the quality is not at risk, while increasing the outflow of tested products.The projects first step is to look at and analyse what is causing the bottleneck at the end-of-line. When the analysis is complete, the next step is to review whether there is a possibility to solve the bottleneck and if so in what way can this be done. Emotrons most overall objective of the project is to increase the outflow of the number of tested products without jeopardizing the quality.An analysis has been made on frequency inverters, soft starters and shaft power monitors.

BACKGROUND: Today?s societal changes, including high rate of change and increasing information flows, are increasing the demand on the individual mental capacity. It becomes increasingly difficult to analytically process all the different dilemmas and everyday decisions as individuals have a limited mental capacity available to make these decisions. Thus, it has been suggested that ego-depleted relies more heavily on intuition, which is less burdensome, when making decision. However little is known about to what extent intuitive decisions differ from analytic.

The Blötberget deposit is situated in the north-western part of Bergslagen. The mineralization is an apatite-iron oxide ore of Kiruna type. In Bergslagen the apatite-iron oxide ores occur along a zone from Grängesberg through Blötberget to Idkerberget in the northeast and they represent the largest and the most important iron oxide deposit in Sweden, south of Norrbotten.Different REE hosting phosphate phases has been studied by optical microscopy and analyzed by EDS attached to an electron microscope.The key minerals other than iron oxides are apatite, monazite and xenotime. The relative concentration of the REE-bearing phases differs from the other apatite-iron oxide mineralizations in the area, for example Grängesberg, by a higher concentration of xenotime and lower contents of allanite..

Nutrient enrichment is the main cause of the increasing eutrophication process in the Baltic Sea during last century. A prerequisite counteract this process the load of nutrients to the Sea must be investigated. The large contribution of nutrients to the Sea is caused by emission from the rivers within the drainage basin. For the total emission of nutrient into the Sea the retention process in the rivers has big influence. This process in the river system has been assumed as a not important part of the nutrient cycle.