The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis is to examinethe possibilities for adding a floor to anexisting building using the two materialswood and sheet metal profiles as the loadbearing structure. An apartment buildingfrom the 60s has been used as referencehouse. Two different suggestions for thedesign are presented in the rapport. Oneof them has been analyzed with wood andsheet metal as the load bearing structure.Using the old constructional calculationsand blueprints of the existing buildings,the load bearing capacity has beencalculated. In the calculation programFEM-Design the building has been testedwith the loads that an extra floor wouldgive.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis is to evaluate and update load curves for Fortum Distribution AB. Theload curve method is a tool used to forecast the strain of an electric grid. The method is based oncustomer annual energy consumption, outdoors temperature as well as customer category. Theload curve method was established by Svenska Elverksföreningen at the start of the nineties andfocus was put on standardizing annual energyconsumption, in order to make the method usableacross the nation. Present consumption patterns have changed since the original load curves wereproduced, which leads to a need to update the load curves.The work began with an update of present load curves according to recommendation taken fromanother earlier thesis.

IDCT (Inverse Discrete Cosine Transform) is a common algorithm being used with image and sound decompression. The algorithm is a Fourier related transform which can occur in many different types like, one-dimensional, two-dimensional, three-dimensional and many more.The goal with this thesis is to create a fast and low effect version of two-dimensional IDCT algorithm, where techniques as multiple-constant multiplication and subexpression sharing plus bit-serial and bit-parallel arithmetic are used.The result is a hardware implementation with power consumption at 19,56 mW..

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

This master of science thesis is focusing on how the fault handling on hardware connected toa control unit on a Scania vehicle is working. To the hardware counts buttons levers, sensorsand CAN. The work has been concentrated upon how the fault handling is working and if it ispossible to find any new fault modes.The control unit that has been studied is called the Coordinator and is the core in Scanias threenetworks of control units. The Coordinators work is to transmit messages between the threenetworks and to process signals from buttons, levers and sensors. The values is then usedinternally or is sent to other control units on the CAN networks.

It?s not unusual for people to upload photos to the Internet nowadays. Despite the fact that there are benefits from doing this, there are also some risks that people should take into consideration before they share private photos. The aim of this survey was to investigate how users of different ages respond to risks related to photo sharing on Facebook. The participants were between the ages of 16 and 64.According to the results it appears that in some cases, even if they can?t be statistically proven, there are patterns that indicate that younger people are more careless and that older people are more careful when it comes to photo sharing on the Internet.

The EU Water Framework Directive has led that management follows the boundaries of natural catchments.The Swedish waters suffer from a nutrient overload that originates mainly from diffuse sources such as agriculture and the subcatchment of Hackstabäcken in Vallentuna Kommun, just north of Stockholm, has been chosen for this study because of its high nutrient load and because it has undergone obvious changes in land use through the years.In this study, the land use in 1902 is compared with the land use in 2011 in order to investigate if it has influenced the ability of the landscape to produce ecosystem services related to nutrient removal. These services will continue to be produced as long as the system is stable and resilient, but when landuse changes and manure from horses increases it will lead to disturbances that can convert a system from one regime in to a completely different one. That will result in loss, or degradation, of ecosystem services such as denitrification, phosphor sedimentation and adsorption, vegetation uptake and infiltration.The results of this study are based upon area calculations of landuse from old maps from 1902 and 2011. Through these maps it becomes clear that the forests in Hackstabäcken, has increased with 170 ha together with an urbanization of 311 ha, at the same time as wetlands and arable land has diminished and lakes has suffered from reductions. Wetlands have been reduced with 76 ha and the ones remaining are of insufficient quality from a nutrient removal perspective.Data from 1902 and 2011 regarding number of horses and bovines indicated a decrease in bovines and an increase in horses.

A problem in the field of district heating is the oil burners needed to provide power when a peak load occurs. One possible way of reducing the needed amount of oil is to reduce the power demand for space heating in the district-heating substations when the need for district heating water exceeds a certain limit. This can be done by use of a locally working controller function.In this Thesis the options concerning load priority are evaluated. To evaluate the potential for using controller functions concerning peak load priority an experiment was brought out in a chosen district-heating substation. The impact on the indoor thermal comfort during a heat reduction was also taken into account.

The aim of this Bachelor?s thesis is to obtain understanding and knowledge about how literary scholars collaborate regarding information. Seven scholars have been studied in the aim to find out social and cultural elements which create particular prerequisites for their practice, with focus on information sharing. The method used has consisted of semi-structured interviews. The informants have been studied from a socio cultural and domain analysis starting point, which means that they are studied in the light of being members in their practice.

Words like pirates and anti-pirates are becoming common features in the cultural political debate of today, and the file-sharing phenomenon has become a more and more delicate and disputed subject. The fact that people are organizing in networks to swap computerfiles with each other has, among other things, led film and music companies from all over the world to initiate a number of anti-piracy organizations, assigned to protect the right to culture and information. The industrial organization Antipiratbyrån (the Anti-pirate Bureau) and the network Piratbyrån (the Pirate Bureau) have on several occasions been used to represent the prevailing conflict in Sweden. The purpose of this study is to apply a sociological perspective to the collective act of file sharing. Additionally, the purpose is to argue that the activity can be understood as a social movement, although it is rarely referred to as such.

This work is a part of the project ?Våtmarker i odlingslandskapet ? uppföljning av miljömålen? (Wetlands in arable land ? following-up of the environmental goals). The main objective with this project is to study nitrogen and phosphorus retention in a constructed wetland by using mass balance calculations. Continuous measurements of nutrients and water flow through the inlet and the outlet of the wetland are made. However, substantial amounts of nitrogen and phosphorus were assumed to reach the wetland with a drain-pipe transporting wastewater from nearby houses (10 persons).

Aiming to contribute to the discourse on the sustainability of consociational democracy in plural societies, this case study provides an examination of Lebanon?s power sharing model. The study begins with an evaluation of the Taif Agreement. After acknowledging its effect on Lebanon?s consociational system the function and operation of Lijphart?s four consociational elements are analyzed.