This thesis applies to a novel steam expander, one part of a steam engine system, a wobble plateengine. The piston in the expander moves axially with the outgoing rotating shaft and is locatedon a plate, why the engine type is called axial engine. When steam is applied to the plungers theplate wobbles creating a rotation on the shaft going thru the wobble plate. The steam expander issupposed to be used in exhaust gas recovery (bottoming cycle) applications and small scaleenergy production. The commissioner is Ranotor Utveckling AB.

The goal of customer support is to help clients achieve maximum value in their services and products. Customer support is the public face of a company, which means that it is important to give the customer a positive experience and live up to customer expectations. Efficient customer support has become more important and studies show that customers who leave a company do so because of poor service. Customers' growing demands for higher quality and easier access to services means that companies must recognize the need to satisfy each customer. It is important that each customer receives the attention required and that customer needs are met quickly and flawlessly.

In this project forging of aluminum alloy Al 6026 T9 has been performed in the temperature range of 400 °C ? 470 °C. The alloy which was in the shape of a cylindrical billet was formed in a press with the aim of analyzing the effect of different forging temperatures and required press load for optimal die filling. The component?s dimensions were later measured and compared to a reference piece.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

This essay describes and compares the extensive reindeer management to the more intensive, but grazing based, sheep management system in Sweden. Differences and similarities between the two production systems will be investigated by elucidating the economy, land use and possibilities to influence production and economy through breeding, feeding and product development. The reindeer management area covers the northern part of Sweden whilst the sheep management is dispersed over the country. Both reindeer and sheep are ruminants and have relatively high demands on the quality and digestibility of the feed however reindeers graze on mountain-and forest lands whilst sheep often graze inaccessible areas or cultivated grasslands. Selection intensity is generally lower in the reindeer management compared to the intensity in sheep breeding.

When farm animals are transported there are several factors that can affect their welfare. If the vehicle has an accident the welfare of the animals transported will probably be compromised. The aim of this study was to make a survey of accidents with animal transportation vehicles in Sweden. The survey included the number of accidents from January 2000 to May 2014, the cause of the accidents and how the animal welfare was affected by the accident. The authorities which were likely to have reports about accidents involving animal transports were contacted. There were no collected records about transportation accidents and the authorities referred to eachother for information.

During the last years the need for real-time database services has increased due to the growing number of data-intensive applications needing to enforce real-time constraints. The COMponent-based Embedded real-Time database (COMET) is a real-time database developed to meet these demands. COMET is developed using the AspeCtual COmponent-based Real-time system Development (ACCORD) design method, and consists of a number of components and aspects, which can be composed into a number of different configurations depending on system demands, e.g., Quality of Service (QoS) management can be used in unpredictable environments. In embedded systems with requirementson high up-time it may not be possible to temporarily shut down the system for reconfiguration. Instead it is desirable to enable dynamic reconfiguration of the system, exchanging components during run-time.

In this study we have focused on the operational management of the public pre-school in Sweden. We have studied how the governance system is designed, why it is designed this way and what impact it has on the operational management. This has been analyzed from a theory stating that there are two types of organizations: pay-driven and function-driven. Through a case and document study we came to the conclusion that the pre-school is a function-driven organization but is nowadays acting on a market and have adopted characteristics of a pay-driven organization. We connect this change to the phenomenon New Public Management.

Nutrient enrichment is the main cause of the increasing eutrophication process in the Baltic Sea during last century. A prerequisite counteract this process the load of nutrients to the Sea must be investigated. The large contribution of nutrients to the Sea is caused by emission from the rivers within the drainage basin. For the total emission of nutrient into the Sea the retention process in the rivers has big influence. This process in the river system has been assumed as a not important part of the nutrient cycle.

This master's theses was carried out on assignment from Stockholm Vatten AB as a part of a project developing new waste water treatment techniques. The goal of the theisis has been to evaluate an anaerobic membrane bioreactor for treatment of waste water from Hammarby Sjöstad. The bioreactor has not been heated and the main interest has been to study the gas production, power consumption and the reduction of organic matter and nutrients.The system has been completed with a reverse osmosis unit and a total of four batch runs have been made with good results. The use of reverse osmosis allows nutrient in the waste water to be reintroduced into circulation as the reverse osmosis concentrate can be used as crop nutrient.The membrane unit is of VSEP ("Vibratory Shear Enhanced Processing") type and an extensive membrane test has been conducted. This so called L-test helped determine the most suitable type of membrane for the system to allow a higher ±ux and thus lower power consumption.

This exam paper has been a collaboration between the writers and System Anderson AB. The assignment was about completing a client application, running on a PDA, and a server application, running as a web service. The web service handles the communication with System Anderssons existing database. The main goal for the application is that it will be used to increase efficiency in storage management. The client application will hold functions for withdrawal, purchase, delivering and inventory.

This report describes the development of a sample loader for my diploma work at Q-linea AB in Uppsala. The sample loader will replace the process of loading fluid samples into Q-linea?s instrument for biomolecule analysis. The earlier process was done by hand and was a time consuming and inefficient task.The work was initiated with a design phase where an overview of the system was created. The sample loader will be receiving text commands from a PC that coordinates all the subsystems like pumps and lasers on the analysis instrument.

Oilseed rape constitutes a good break crop within a cereal dominated cropping system. The normal sowing time for winter rape in Sweden is August. It's a time in the cropping year characterized by a heavy work load, such as harvest and soil management. In addition, it is often a period with large precipitation. Thus, it is sometimes problematic for the farmer to do the sowing of winter rape at the optimal time.

AbstractTitle:The Impact of Management Control Systems on the Purchaser Function - A study of Scania and Sandvik Authors: Mohammad Reza Akhbari and Johanna Sullivan Svensson Published: 2011 Keywords: Management control, purchasing function, impact, control, control instruments, Key Performance Indicators, measurement, communication and organizational structure. Background and problem formulation: In order for a company?s business idea or vision to be fulfilled, the management of a company needs assistance from various means to intentionally affect the operation in the desired direction. Management control concerns activities of both financial and non-financial character in order to implement the strategy of a company and to reach profitability. Since the purchaser function is responsible of spending 50 percent of a company?s total revenue, the function has an optimal starting point to be a key actor in the shaping and execution of a company?s strategic plan.

För ett par år sedan tog utvecklingen och fokuseringen kring Internet fart på allvar ute bland företag. Alla skulle ha en webbsida och anledningen till detta var ofta att konkurrenten hade en eller att man bara ville synas. Idag finns det ett antal så kallade Content Management System utvecklade för att hantera information på Internet, intranet och extranet. Det gemensamma för dessa system är att användarna skall kunna uppdatera, vidareutveckla och administrera lösningen utan någon teknisk kompetens. Syftet med den här uppsatsen var att undersöka om ett Content Management System effektiviserar uppdateringen av information, med hjälp av kategorier inom användbarhet. Användbarhet består av flera olika kategorier, dock har vi valt att begränsa oss till tre av dessa; effektivitet, syfte och tillfredsställelse. För att få djupare kunskaper inom ämnet användbarhet har vi läst böcker och artiklar, vi har även sökt information via Internet. Vi hittade information om användbarhetstest där vi fann en metod som hette utredning.