In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area. The results show that use of locally installed renewable energy sources can reduce the total climate impact when life cycle perspective is applied.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

This report is a thesis for collegeengineering program in structuralengineering at Uppsala University andwas commissioned by the Swedishcontractor Svevia. The study aims toprovide an overview of the mostbeneficial bridge material from bothenvironmental and economic point ofview.The life-cycle analysis covers onlycarbon dioxide emissions, since it isthe most spoken of in today?s climateagenda. Furthermore, this study aims tohighlight which parts, of the systemboundary, that contributes to greatercarbon emissions for the wood- and theconcrete bridge.The life-cycle cost analysis wascalculated with a lifespan of 40 yearsand covers the basic cost of investment,operating and maintenance, anddecommissioning costs.The analyzed constructions in this studyare existing projects that are almostcompleted. Both bridges were designed tohandle loads up to 60 tons.

Förr eller senare minskar tillgången på råolja och därmed bensin och diesel i världen. Då måste vi människor finna andra drivmedel för att klara våra transportbehov och andra behov som är beroende av drivmedel. Förutom detta finns det behov av åtgärder som minskar emissioner av CO2 till atmosfären. Etanol som drivmedel är relativt nytt, och marknaden är potentiellt mycket stor. Agroetanol AB är en etanolfabrik i Norrköping som använder spannmål som råmaterial.

Today, about 15 to 20 percent of Sweden?s total emission of carbon dioxide can be traced to the household sector. By examining apartment blocks in a life cycle perspective, the origin of the carbon dioxide emission has been charted and analyzed. This information has been used to create a computational model that calculates the total emission of carbon dioxide from a specific apartment block. The results from the analyzed apartment blocks indicate that both the use of energy and the emission of carbon dioxide have been reduced since the 1960s. Through the examination of building materials, it is possible to lower the emission of carbon dioxide that origins from the construction phase of an apartment block.

Long transport of products is an environmental issue discussed to an increasing extent. The consumers are increasingly aware of how far our comestibles really have been transported. The increasing levels of environmental emissions are something that concerns people. The question is nevertheless delicate and many choose to ignore it. This is no longer an option.

An increased awareness about the global warming has created a demand for more information on how the climate is affected by different activities.This master thesis was initiated by Tricorona, a Swedish company that offers its customers analysis and calculation of their climate impact. Tricorona also supplies climate neutralisation with CERs, in accordance with the Kyoto protocol and controlled by the UN. This work demands updated emission factors for greenhouse gases. An emission factor gives information about the greenhouse gasintensity of a service or a product [kg CO2-eq./ functional unit].The purpose of this thesis is to examine how electricity, district heating, hotels, taxis, food and materials affect the climate and how emission factors for these areas can be calculated.This was done by reviewing and comparing different studies and by interviewing experts. The information was evaluated and recommendations on calculations and emission factors were made.The consumption of energy is the main source of greenhouse gas emissions for district heating, electricity, hotels, taxis and materials.

This study was a final thesis, for the bachelor program in civil engineering at theUniversity of Uppsala, which was made on behalf of Riksbyggen in Uppsala. Acomparative study of two stain renovation methods; tradition pipe replacement andrelining was done with an environmental perspective. A simplified life cycleassessment (LCA) was done according to the International Organization ofStandardization (ISO) with the LCA tool Eco-indicator 99, in order to be estimate theimpact on the environment. LCA is a method that follows a product or a system?from the cradle to the grave?, which means that all the environmental impact over alifetime is considered.The work was executed by using a stairway with nine apartments in a house called?Uppsala Hus 9? as a reference object, which was provided by Riksbyggen.

Antalet övervakningskameror i samhället ökar, samtidigt som deras miljöpåverkan är relativt okänd. För en produkt som tidigare bara utvärderats gällande prestanda, börjar kunderna nu efterfråga en kartläggning av miljöpåverkan. Kamerans miljöpåverkan studeras ur ett livscykelperspektiv: energi- och materialtillförsel samt utsläpp och avfall som berör allt ifrån råmaterialutvinning till slutåtervinning. Projektet är genomfört på begäran av, och för, Axis Communications AB (härmed refererade till som Axis) med huvudsyfte att öka Axis kunskap om deras produkters miljöpåverkan och utveckla en metod för genomförande av förenklade Livscykelanalyser på Axis produkter. Livscykelanalysen, LCA, genomförs på en nätverkskamera utvecklad av Axis Communications AB; modell AXIS Q6032-E PTZ.

Undermåliga enskilda avlopp i Östersjöns närområden bidrar till både övergödning ochförorening av havsvattnet. En av orsakerna är att sommarstugeområden i allt högre gradövergår till åretruntboende. Denna successiva förändring, skapar så kalladeomvandlingsområden, med i många fall otillräckliga avloppssystem. I takt med att flerväljer att bosätta sig permanent i dessa områden ökar belastningen på avloppen ochdärmed risken för läckage och föroreningar.Ett sätt att minska utsläppen är att bygga ut det kommunala avloppsledningsnätet tillomvandlingsområdena. Problemet är att det kan ta 5 ? 10 år från planering avutbyggnad fram tills inkoppling av kommunalt avlopp kan ske på berörda fastigheter.Under den tiden behövs tillfälliga avloppssystem som kan användas somövergångslösningar, ersätta bristfälliga enskilda avlopp och förbättra miljön.

This work of examination describes an environmentally oriented product development aimed to develop new packaging with improved environmental and sale aspects of the products from Primus Sweden AB. The report covers the design process from the first collection of facts to the final results with a description of all methods involved in the work. The focus has been on a clear environmental awareness and the report contains a deepening of the concept life cycle assessment (LCA) for product development. In the process, the consumers? opinions of the brand Primus and environmental profiling formed the basis for the packaging to communicate the right values such as quality, technology, environmental awareness and adventurer?s first choice.The deepening of the life cycle analysis shows that composting and other alternative treatment of the biological cycle is not possible to implement in a satisfactory way in the design process.The work results in two final concepts.

Denna rapport beskriver miljöpåverkan av en snökylanläggning i jämförelse med konventionell kylmaskin. Genom att värmeisolera snö kan den användas i en snökylanläggning för att ge kyla under sommaren. Studien omfattar anläggningarnas hela livslängd inklusive byggnation och avveckling. I rapporten har kraven för miljökonsekvensbeskrivningar kombinerats med metodiken för Livscykelanalys. På grund av antalet apparater, byggteknik och ökade komfortkrav på arbetsplatserna har ett behov av att kyla bort överflödig värme uppkommit.

Syftet med examensarbetet var att med en miljösystemanalytisk metod jämföra och bedömamiljöbelastningen från vägkonstruktioner som består av olika lättfyllnadsmaterial. Materialensom analyseras är Leca, ®HASOPOR och gummiklipp. Leca är bränd expanderad lera ochgummiklipp är uttjänta bildäck som klippts sönder. ®HASOPOR, kallas också för skummatglas, består av glasavfall som malts till ett fint pulver och sedan upphettats tillsammans medett jäsmedel som får materialet att expandera.I studien bedöms två olika frågeställningar. Den första syftar till att få svar på vilket materialsom är bäst att använda ur miljösynpunkt, utan att ta hänsyn till alternativ användning av glasochgummiavfall.