Simulation of different systems can be done using a graphical model description of the system based on block diagrams. The simulation software Matlab/Simulink offers a lot of possibilities to describe a huge number of systems, which can be linear as well as nonlinear. The simulation using Matlab/Simulink is done by integration based on different kinds of numerical methods.When nonlinear Simulink-models are simulated, it is often interesting to apply a Kalman filter to handle the noise that may occur within the process as well as corrupting the measurement. However, application of such a filter leads to an extensive time-consumption despite using fast computers. The reason is that the existing Matlab functions are not constructed for time optimal evaluation.

A reward cycle for investigating the emotional status in animals has been developed and it requires that animals go through three main phases, i.e. anticipation, consumption and relaxation. The reward cycle has not been tested previously for access to play in pigs. Therefore, the aim of this Master thesis was to investigate if growing pigs showed more behaviours indicative of excitement than pigs that were not allowed to play, performed play in a play arena and showed more behaviours indicative of relaxation after play when they were back to their home pen than pigs that were in their home pen the whole time. Forty undocked piglets (10 litters of Specific Pathogen Free half pure-bred Yorkshire and half hybrids of Yorkshire x Landrace balanced for breed between two treatments were used.

By limiting our horse?s freedom of movement, we restrict their opportunity to forage, which is one of their most important needs. If their need of forage is not fulfilled it can lead to frustration, which might manifest itself in abnormal behaviour, like the oral stereotypies for example crib-biting. It is a held belief that the horse swallows air while crib-biting, which they don?t, and that swallowed air causes colic, and the belief that other horses can copy the behaviour, leads to the use of many methods to prevent the behaviour.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The aim of this study is, using the Swedish expression ?kulturtant? (cultured lady) as starting point, to understand how and why women consume the products of the culture industry more eagerly than men. The study is using the concepts put forward by Pierre Bourdieu; fields, capital and habitus. It is a qualitative study based on discussions in focus groups, interviews and material gathered through Google Alerts. In the literature this gap between the sexes with regard to the higher consumption on behalf of women has been referred to as the ?puzzle? of women´s cultural consumption.The empirical results show that the women in the study are well aware of what they want to gain by participating in cultural activities like reading, going to concerts, watching plays or going to the movies.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

Heat is distributed to the district heating customers through pipes with water as a heat carrier. The district heating system is complex. To decide what is leakages from the district heating net versus what is the water consumption of the plant, is difficult. Therefore, the purpose of this master thesis is to establish a model where the district heating net?s leakages but also the water consumption of the plant can be followed daily. The project is performed at Vattenfall´s district heating power plant in Uppsala. Information is gathered through discussions, drawings of the plant and guided tours of the plant.

Stump harvest could be found in the late 1970?s and the early 1980?s. And now when the prices on energy are high it has become an interesting topic again. This work has been conducted within Holmen Skog?s stump harvest testing in Norrköping.

Syftet med denna rapport är att ta fram en specifikation för ett datorverktyg som visualiserar händelseupptäckt i aktiva databaser.Konventionella databashanteringssystem (DBHS) är passiva i den mening att data är skapad, hämtad, modifierad och raderad endast när en användare eller ett applikationsprogram explicit angivit detta. Många applikationer, såsom process control och power generation/distribution networks, kräver en snabb respons i kritiska situationer, och därför räcker inte ett passivt DBHS till. För dessa applikationer måste man kunna definiera villkor som övervakas av databasen. När dessa villkor sedan uppfylls utförs specificerade åtgärder/handlingar.Consumption modes är ett svårt och komplext område inom aktiva databaser. Som ett resultat av detta finns ett intresse i att använda visualisering för att lättare förstå de olika consumption modes som finns.En prototyp utformades för att fungera som underlag vid de intervjuer som senare genomfördes.

Decomposition of organic matter is a critical process in the ecosystem, which involves many essential biotic and physical parts. Decomposition is therefore an important process both above and below ground. The rate of decomposition is dependent of many environmental factors for example: pH, moisture and supply of oxygen. The decomposition can therefore be affected by large scaled environmental influences, such as acidification and climatic changes. The root litter in the forest is in different ways affected by acidification, liming and manuering.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

Understensho?jden is Stockholm's largest eco-village which was built in the early 1990s with the vision of enabling ecological living for people. However the ecovillage is no longer considered as environmentally friendly because of its relatively high energy consumption, and non-updated energy system. The purpose of this study is therefore to investigate how Understensho?jden should reduce their energy consumption and upgrade its energy system by using Blower-Door, IR-camera and Design Builder.

Our digital society encompasses nowadays different channels, which includes social media where many users consider it as a platform where they can fetch news or exchange news and information. This leads to a large spread of news exchange in a very fast speed, which involves the global users within social media to be a part of this social interaction. This study is focused on how Twitter affects the usage of the user?s news consumption. By reaching out to our specific target audience, which includes Twitter users in Sweden, we made a web based survey with a content of relevant questions.

Stump treatment today requires large quantities of clean water mixed with the protective product Rotstop, to fully cover the stump surface. In order to reduce the water consumption without reducing the coverage of the stump surface, the pressure in the stump treatment device can be increased. Therefore, the Phlebiopsis gigantea (Fr.) Jül. suspension used as a biological control agent to prevent Heterobasidion annosum (Fr.) Bref. infection was pressure-tested.

The release of green house gases and the environmental impacts humans have on the environment are huge and might cause irreversible changes to our earth. Meat is considered to have large impacts on the environment, especially beef meat and therefore there have lately been considerable discussions on the sustainable level of meat consumption and production. The main goal with this thesis is to study sustainable meat production and meat consumption in the county of Dalarna in Sweden. Indicators for sustainable meat production and meat consumption were developed and applied on three cases. Interviews were carried out with a municipality in the region that represents the consumer and three beef farmers that represents the producers.