Estimation of the variation in the integrated hydraulic conductivity around the Tunåsen infiltration facility - An investigation of the effects of uncertainties in existing informationAlmost half of Sweden?s drinking water volume is produced from groundwater. The main fraction of this is extracted from eskers, some of which allow for very large extraction rates. Despite this, the groundwater volume is not sufficient in some areas. This has led to an extensive use of artificial recharge.In Uppsala, the total volume added through artificial recharge is divided between four infiltration facilities.

AbstractAccording to several researchers finance is scarce, scarcer for small businesses than for big enterprises. Small and medium-sized enterprises, SMEs, that want to start exporting and sales or manufacturing abroad need capital to get ready. Which capital structure and financial costs do they have, and which forms of finance do they actually use for that purpose. New american research by Mansi, Reeb (2002) has suggested, that there is a positive connection between leverage and a negative one between financial costs and internationalization, and that a non-linear model better describes this connection.This study has gathered data in two ways: Through a questionnaire from 37 SMEs and balance sheet figures from totally 166 manufacturing SMEs. In order to examine, whether the company was active on the international market, 200 SMEs in south Sweden were asked, if they exported to, produced or sold on any other market than their home market.

The Swedish Transport Administration has, and manages, a database containing information of the status of road condition on all paved and governmental operated Swedish roads. The purpose of the database is to support the Pavement Management System (PMS). The PMS is used to identify sections of roads where there is a need for treatment, how to allocate resources and to get a general picture of the state of the road network condition. All major treatments should be reported which has not always been done.The road condition is measured using a number of indicators on e.g. the roads unevenness.

Microsoft launched a new operating system, Windows 8, during 2012. An interesting feature for Windows 8 is that applications can be developed using different programming languages but still provide the same functionality regardless of the language used. Two combinations of programming languages are: XAML with C# and HTML with JavaScript. This thesis examines if there are any advantages or disadvantages when choosing a specific combination of languages to develop Windows 8 applications with. An application has been developed and analyzed for the SwedishTransport Agency during the thesis project..

Arbetet har utförts på Saab Bofors Dynamics AB i Linköping och dess syfte är att undersöka möjligheten att applicera teorin för prediktionsreglering, Model Predictive Control (MPC), på guidance systemet i en missil av typen Medium Range Air-to-Air Missiles (MRAAM). Även implementering via Explicit MPC har undersökts. I tidigare studier har det visat sig att den moderna slutfasstyrningsalgoritmen Linear Quadratic Augmented Proportional Navigation (LQAPN), som återkopplar missilens acceleration och rotation, uppvisar en bättre prestanda än de mer klassiska styrlagarna. Det främsta intresset med denna studie är därför att undersöka hur tillvida en styrlag baserad på MPC kan mäata sig med dessa resultat. Fördelen med att använda MPC är framförallt att man kan ta hänsyn till styrsignalbegränsningar på ett direkt och intuitivt sätt.

Abstract CORDIC (Coordinate Rotation Digital Computer) is an iterative algorithm for the calculation of a two-dimensional vector in circular, linear or hyperbolic coordinate systems. This paper presents a survey of known CORDIC algorithms and architectures for the rotation and vectoring mode in the circular cordinate system. In addition an implementation of the differential CORDIC algorithm in VHDL has been done. The implementation is designed to keep the fast timing and throughput characteristic known for on-line redundant arithmetic..

GBD-Storage Systems is a company that provides the industries with products for efficient storage.The company produces pallet racks and accessories like cassettes and extending units. The companyhas also supplied tire racks for a number of tire companies. The company's CEO Gunnar Berglund hasfor some time had an idea to improve the working situation of the workers on tire firms by allowingthe wheels to be handled by a counterbalance truck. The current situation poses numerous heavy liftswhen the tires are handled and therefore is hurting the workers.This thesis has been aiming at helping the GBD-Storage Systems by developing a concept of howan accessory to counterbalanced trucks can be designed to cope with the wheels. This concept willthen be produced as prototype by the company.

Background: It is today common for companies to provide some sort of incentive for CEO's and senior management positions to motivate, retain and benefit employees within a company. This is in order to drive the goals of the CEO and management in the direction that is desired by the owner. Currently, the Swedish centre-right government has forbidden the use of such variable pay within state-owned companies. There are two different attitudes to variable pay, one that is in favour and one that rejects it. However most people agree on the fact that a well-functioning incentive scheme can be of great strategic importance for a company.Approach: has variable pay to CEO's had any effect on the company's profitability.Aim: the aim of the study is to compare companies who use variable pay to CEO's with companies that do not in relation to their profitability in terms of profit margins, yearly performance, returns on total capital and returns on equity.Method: the study uses a quantitative approach.

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.

Even if the main purpose is to decide if the companies profitability and financial position is a determining factor for its growth, the purpose is to determine if there are any differences between big and small companies in there economical positions then they grow, in the selected industry. This thesis is mainly a quantitative study. The selected industry for the study is extraction of turf. The financial measurement that most clearly differ the growing companies from the not growing companies or the companies that didn?t change there amount of employees was the returns of the companies own capital.

Among the Indigenous cattle breeds in Indonesia, the Bali cattle is the most preferred by small farmers. The Bali cattle is a beef breed, and is considered to have several advantageous characteristics and to be well adapted to the country?s harsh environmental tropical conditions with drought and rain. The main aim of this project was to phenotype of Bali cattle from different locations in order to identify and document diversity within the Bali cattle breed based on their observable characteristics, to compare cattle from different areas and production systems to see the effect of management on phenotype. In this study, 107 cows and bulls of the breed Bali cattle, from Kalimantan, Sumatra, Lombok and Bali were phenotyped.

Over an extended period of time there have been plans to establish a shared facility in Lennheden to extract groundwater from the Badelunda esker to provide drinking water for the cities of Borlänge and Falun. The city of Falun is dissatisfied with the quality of its drinking water and the city of Borlänge is concerned about the risk of contamination of its existing groundwater supply at its current location. To provide a basis for a decision on this issue, the company Midvatten AB has been commissioned to perform hydrogeological investigations in the area of Lennheden.The purpose of this thesis is to design a functional groundwater model of the area between Lennheden, place of planned extraction, and Övre Tjärna, place of existing extraction, to get a better understanding of the groundwater situation in the area. A groundwater model enables simulations of different scenarios in risk assessment and contaminant transport. The aim of the thesis is that the model can be used as an aid in Midvatten?s investigations in Lennheden and that it also can be used in future projects in the area.The model has been made in Processing Modflow 5.3 and encompasses an area of 19,5 × 11 km along the Badelunda esker and the river Dalälven between Djurmo and Frostbrunnsdalen.

During 2006 an estimated number of 150 persons are supposed to have been killed in road accidents caused by speed limit violations. Through Automatic traffic security control (ATK) the Swedish road administration (Vägverket) is working towards lowering the number of speed related accidents. By placing the speed cameras on roads they've managed to lower the average speed at those places. The enlargement of the number of speed cameras is based upon knowledge about for example how high the risk is for speed related accidents on the roads. The speed cameras always measure the speed in which every vehicle passes, but aren't constantly activated to register speed violations.

Even if the main purpose is to decide if the companies profitability and financial position is a determining factor for its growth, the purpose is to determine if there are any differences between big and small companies in there economical positions then they grow, in the selected industry. This thesis is mainly a quantitative study. The selected industry for the study is extraction of turf. The financial measurement that most clearly differ the growing companies from the not growing companies or the companies that didn?t change there amount of employees was the returns of the companies own capital. It was also the returns of the companies own capital there the main difference existed between the big and the small companies.

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.