AbstractAccording to several researchers finance is scarce, scarcer for small businesses than for big enterprises. Small and medium-sized enterprises, SMEs, that want to start exporting and sales or manufacturing abroad need capital to get ready. Which capital structure and financial costs do they have, and which forms of finance do they actually use for that purpose. New american research by Mansi, Reeb (2002) has suggested, that there is a positive connection between leverage and a negative one between financial costs and internationalization, and that a non-linear model better describes this connection.This study has gathered data in two ways: Through a questionnaire from 37 SMEs and balance sheet figures from totally 166 manufacturing SMEs. In order to examine, whether the company was active on the international market, 200 SMEs in south Sweden were asked, if they exported to, produced or sold on any other market than their home market.

ABB Surge Arrestors in Ludvika have for a long time had a problem to keep the moisture at a steady state in the production of their ZnO-powder, that is used to produce varistors.Some black-box models of the spray drying process have been designed and evaluated to find a solution for the problem. After evaluating the collected data it has been found that variations in the supply voltage causes control difficulties for the operator. A cascade control system was designed, consisting of three PI control loops designed with lambda tuning. The disturbance in the supply voltagewas used as a feed forward in the control system.At the end of the project the control system was installed, and tests were made to verify the functionality of the regulator. It was shown that most of the variations in the moisture of the powder could be eliminated using small resources, through purchase of a process controller and four power meters.

Syftet var att undersöka om personers Locus of Control påverkar deras konflikthanteringsstrategier i kärleksrelationer. Hypoteserna var: H1: Det finns skillnader mellan personer med extern och intern Locus of Control när det gäller vilka typer av strategier de använder för att hantera kärleksrelationsproblem. H2: Personer med intern Locus of Control har större benägenhet att använda sig av relationskonflikthanteringsstrategin Kompromiss i sina kärleksrelationer. H3: Kvinnor påverkas mer än män av Locus of Control när det gäller vilka typer av strategier de använder för att hantera kärleksrelationsproblem. Deltagarna var 172 studenter.

The connection between management control systems for controlling sustainability and a firm's motivation for engaging in sustainability is not completely understood (Arjaliès & Mundy, 2013). The aim of this thesis is to develop a more profound understanding for management control in achieving sustainable companies. To do this, we raise the question: How and to what extent do companies use management control systems to achieve sustainability compliance Simons's Levers of Control (1995) are applied to this question in order to get a consistent and thorough insight of management control systems. Hence, a case study of ABB:s work to achieve material compliance in accordance with EU-regulation was conducted. The findings of the case study reveal that ABB uses the regulations as explicit goals and implement them in sustainability procedures.

In the electronic industrials, power control of AC motors is commonly used. For example power control of a washing machine motor, a vacuum cleaner motor or a coffee machine motor. The company Rejlers Ingenjörer AB has many projects where power control of AC motors is included. A prototype card for this task can save time and money for the company in the future and this is the reason for this thesis.The motors are power controlled by a TRIAC and control of the trigging pulses to the TRIAC. This card is modularly built and can easily be adapted for future projects where the power control of AC motors are included.The prototype card can be used as a subsystem in a larger electronics projects or as it is in lab environment for testing and evaluating new motors..

To be allowed to sell Z-suspended vehicles with dipped beam Xenon or LED lighting, Scania have to develop automatic headlight level control. This master?s thesis aims to be the foundation to that development.The thesis consists of several parts; a market analysis of how competitors to Scania and the general vehicle industry solve this problem; several available principles for detecting the amount of control needed; the construction of a test station for sensors, a control unit and components connected controlled by the control unit; a further theoretical and practical development of one principle ? one rotational sensor connected between the chassis and the back drive axis; a state flow model programmed in Simulink that produces the control signal for the headlight leveling from the sensor input.Lastly the thesis gives some recommendations to the further development and implementation of automatic headlight level control on Scania vehicles..

Föreliggande studies syfte var att undersöka validitet och intern konsistens för den svenska översättningen av Impaired control scale (ICS), en självskattningsskala som mäter grad av kontroll av alkoholkonsumtion. ICS består av subskalorna; Attempt control (AC), Failed control (FC) samt Predicted control (PC). Svar på ICS sammanställdes från respondenter (n = 203) som behandlats för alkoholproblem vid mottagningar i Västra Götaland. Faktoranalysen visade en bakomliggande faktor för AC, och två faktorer för FC respektive PC. Den interna konsistensen var god.

AbstractThis report is about the creation of a test system for development of a control system for a off the shelf RC-helicopter, which can be bought for about two thousand SEK. The test system consists of both electronics for controlling the helicopter and mechanical constrainer. The constrainer is used for mounting the helicopter so that it won´t crash.A circuit board including processor and sensors was manufactured. This was used for doing test of the different control algorithms. In this way were we able to analyze the quality of the sensors chosen, and what other sensors that could contribute to the control of the system.Basic helicopter control have been studied and presented in the report.

The purpose of this thesis is to analyze the design and function of an engine production management?s control system and its intended function, and to contrast it with the present management control systems in use on an operational level. Interviews conducted with employees from all levels of the engine production are the main source of this study?s empirical foundation. Information has also been gathered from relevant written material such as annual reports, internal documents etc.

This thesis has been carried out in collaboration with LEDtec International AB. LEDtec focuses on innovative solutions in LED screens. Everything from large advertising signs to welcome signs in cities, to screens indicating speeds or warning of heavy traffic. The task was to was to help them develop a new version of the control board that is used in some of their products. The reason for this is that their old control board is obsolete and the components that are on it, is no longer manufactured or in need to be renewed.

ENGLISH SUMMARYTitle:The ambiguous scorePresenting romantic piano pieces from simplified scoresIn this essay, I have investigated if different types of simplified scores ? scores whose musical structure are clearer compared to the original ? can stimulate a more artistic interpretation as well as a more linear understanding of the piece. My analysis also investigates what kind of impact these kinds of scores have on memorization.The music is derived from the romantic piano repertoire and the subjects are six university-level music students. Half of them were placed in a reference group, and only received the original scores, while the others also received the altered versions. I used both reduced scores where notes were removed in order to emphasize the linear structure and scores where the pitch notation was the same as in the original , but the notes were grouped differently.The result indicates that those having access to multiple versions had a positive impact on the musical interpretation.

The purpose of this essay was to examine whether small businesses can avoid ac-counting crimes with a well-conducted internal control system. The questions we asked ourselves was, whether and if so, companies can prevent this from happening by using a internal control.In this essay we used a qualitative approach. Essential information was given to us from four different interviewees. We also worked from an inductive approach which means that we interviewed people without any earlier research to build on. The method also had a hermeneutical approach, which means that we made different interpretations based on the reference framework and the empirics.After the study had been carried out, we concluded that all evidence from this essay suggested that even small businesses need an internal control to protect their business.

En majoritet bland ledare i olika organisationer har en bakgrund som storasyskon eller ensambarn (Hudson, 1990). Denna studie genomfördes för att få svar på om personer med ledaransvar skiljer sig åt gällande syskonplats och locus of control jämfört med de personer som inte har ledaransvar. Ledare och medarbetare på en statlig myndighet svarade på en enkät gällande plats i syskonskara, erfarenhet av ledarskap och locus of control. Resultatet visade att sistfödda i detta urval hade en högre grad av intern locus of control än förstfödda vilket kan tyda på en annan typ av sistfödd på denna myndighet. Urvalet var dock bristfälligt (N = 48) och slutsats kunde inte dras utan att riskera ett felaktigt resultat..

The thesis was performed at Forsmarks Kraftgrupp AB in the department ofmechanical engineering, FTCM. Forsmark nuclear power plant has had problems with cracks in some of the controlrods which are placed in the reactor at Forsmark 3. To investigate the cause of this,material samples were taken from five of the damaged control rods. This sampling ofthe rods resulted too short rods to be transported in the shipping container to theinterim storage facility for used nuclear fuel in Oskarshamn. Control rods are crucial components in a nuclear reactor, regulating the reactoreffect by blocking or unblocking fuel rods. Control rods which have been in thereactor are always handled under water in order to protect against the radiation theyemit. The task was to design a control rod adapter that extends the control rod sotransport can be performed from Forsmark. The goal of the work was a complete setof blueprints so the control rod adapter can be manufactured and mounted on theshort control rods and then be transported to the interim storage facility. The work began with mapping of how control rods normally being handled from thereactor to the interim storage facility.

Värnamo Elnät owns and operates a ripple control system which is used to control loadsespecially when the grid is heavily loaded and for control of street lighting. This report aims atclarifying technical and economic aspects of the ripple control system?s future. The system wasinstalled from 1975 and onwards and its use was greater in those days when the controllableloads where greater then today, the current controllable load level is about 3 MW. The reporthighlights three different aspects of the ripple control system?s future ? retain the currentsystem, reinvest in a newer system or discontinue the system.In the report the author also discusses relevant connections to Smart Grids and future meteringsystems and tariffs.