Background: Folate is a water - soluble vitamin necessary for normal DNA synthesis among  other mechanisms. Folate deficiency can cause megaloblastic anemia resulting from abnormal erythrocyte d evelopment. At the Department of Clinical Chemistry, Linköping, analysis of folate is performed with Siemens ADVIA Centaur® XP which uses an immunochemical method with chemiluminimetric detection. Currently, the assay is conducted on serum, is poured off and frozen after 48 h and treated with light protection because folate is considered to be light sensitive.Methods: This study tested lithium heparin plasma for analysis of folate with Siemens ADVIA Centaur® XP with the aim to be able to perform a package of analyzes in anemia investigation from the same collection tube. Furthermore, the stability of folate was studied for up to 168 h and examined regarding light sensitivity.Results: Statistically significant higher values were obtained in the analysis of folate in lithium heparin plasma than folate in serum (p < 0,001).

Studien försöker belysa vilka svårigheter elever som läser det individuella programmet möter och vilka möjligheter de har i deras strävan att gå vidare till ett nationellt program. Studien ger också svar på frågan om IV-elever trivs med att läsa programmet och om de börjar en gymnasieutbildning efter IV. Jag ville också ta reda på om vad elever i grundksolans årskurs nio tyckte om informationen om gymnasieskolan, och om alla fick chansen att prata med en studie- och yrkesvägledare. Studien belyser också frågan om ursprung har en viss betydelse för fortsatta studier på nationella program..

Use of lighting is crucial to make public urban places available during dark hours. Landscape architects participate in planning of lighting, but during our education there is very little taught on the subject. Through this study we approach the subject of lighting by looking into lighting methods for urban plant materials during winter. In this thesis we look into ways to emphasize the visible characters and experiences of urban plants during winter season using light. Target audience are landscape architect students and landscape architects without knowledge of lighting. The part of the thesis that describe basic conditions for, and visual characters of plants can be useful to lighting designers without knowledge in this subject. Working methods used were the following: ? Pre-study about light and lighting techniques through literature and dialogues. ? Compiling important visual winter plant characters through photography and literature. ? Outdoor light experiments with plants.

The contemporary angel-symbol is deeply rooted in our cultural history, with connotations and implications leading to that inner transitional space where all creative activity takes place. This essay investigates the history of the depiction of angels, visions of angels both ancient and modern, and includes psychological aspects of symbols as such. A closer look at surrounding symbols of angels will hopefully result in a greater understanding of the role of the angel-symbol within the context of visual culture, seen in the light of our own symbolic universe..

This thesis has been done in order to ease the process of drawing schematics ofelectrical wiring. The need arose after demand from the government due to a seriesof incidents that took place during the revision of the nuclear power plant in year2009.The task of the project has been to create a computer program that can generate agraphical representation of the electrical components relations. The basis for theprogram has been an example of how the client wants the graphical representation tolook. During the course of the project weekly meetings have occured in which theclient has reviewed the work.The result of the project is a program written in Visual Basic Applications that can berun in Microsoft Excel. The program is capable of generating graphics for a majority ofthe cases.

The purpose of this master thesis has been to find different solutions to the design of a headlamp with a cluster of three or possibly four high power LEDs (Light Emitting Diodes). During the work, two different problems have been considered; how to design a lens in order to shape the light beam in a desirable way, and how to design a cooling system which will lower the temperature of the LEDs as efficiently as possible, still taking into account the geometry set by the optical solution as well as other given geometries. The results presented in this thesis are partly the outcome of a literature study, but derive mainly from a number of tests and measurements made on two test rigs and one concept prototype..

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

Who is integrating school-holiday home? It is for the teachers, recreational pedagogue or the students? How do the students think and act to keep the different activities apart?My purpose was to study how children sort the day between school and recreational home interactions. The issues were: How do they distinguish between the different activities during the day?  See the students their stay after school program as part of the school day? Who decides whether you have to go to school, and whether you have to go to after school program? And do you really have to?I have interviewed six students at an elementary school, based from a phenomenographic perspective, I've used myself of issues that students have been able to respond from a school perspective and after-school perspective. My interview questions have been comparative in nature, where the same question have given different answers depending on whether the question focused on school or the afterschool program.

The project was based on a request to improve an already existing program and hardware at the electrical engineering department at the royal institute of technology. For maximum ease of use, tests have been done on students to properly design the program for what it is meant to be used for. These tests have been transcribed and analysed, then brought back to the group in a discussion and then transcribed and analysed again, I call this process the ?four step process? (this process is presented and explained in chapter 6.4.). A part of this master thesis was also to analyse the four step process to enhance validity of this research.The project resulted in a new program with a new graphical view and features to help students and researchers to work with the technical tool for electromagnetic readings of planar objects.

Active sensors are used a lot in the society and industry, for example to gain better control over processes or to get proximity sensing features in different products. Within industry there is great interest in developing safe automation products that can be controlled with high accuracy but still at a low cost.The goal of this project is to develop a prototype of a non-contact rangefinder that measures distance using infrared light. The sensor is to be used for various applications in industries with relatively high accuracy and be compact, but at a low cost. By implementing a rangefinder into a product, more accurate detections of an object?s presence can be done.In this project a new distance sensor, EPC600 from ESPROS, was used.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

Full-field flash electroretinography is an electrodiagnostic method used to examine the function of retinal cells. Light stimulation of the eye elicits electrical potentials in the retina. By aid of a corneal electrode and a reference electrode close to the back of the eye, the electrical potentials can be recorded and presented as an electroretinogram (ERG). ERGs driven by mainly one type of cones can be used to examine the function of a single cone class. In human beings, studies have shown the cone class sensitive to light of short wavelengths, the S-cones, to be more vulnerable to acquired damage than the other cone classes (Daley et al., 1987; Gouras et al., 1993; Greenstein et al., 1989). Dogs have two cone classes, S-cones, and M/L-cones (most sensitive to medium to long wavelengths).

Tropical rain forests only cover around six percent of the world?s land area and contain around 70 % of the world´s animals and plants. Tropical rainforests have been, and still are, negatively affected by human activities. These activities lead to forest degradation which has negative impacts on production and biodiversity. Between 1970-1980 forests in Borneo, Sabah, Malaysia, was subjected to intense logging.

Uppsatsen behandlar belysningsarmaturer inom LED-segmentet. Uppsatsen behandlar i synnerhet varför ljuskällan i LED-belysningsarmaturer oftast konstrueras så att ljuskällorna inte är utbytbara. Metoder som har använts i förstudien har varit; informationssökning, kvalitativa intervjuer, teknisk LED-modulsinventering samt konstruktionsundersökningar. Metoder som använts i produktutvecklingsfasen har varit; tekniska informationsstudier, Idéinventering genom visuell idégenerering, imageboards och skissprocess (att tänka med en penna). Syftet med projektet har varit att utveckla en LED-armatur med utbytbar ljuskälla. Projektets resultat blev en LED-golvarmatur med utbytbar ljuskälla. Ljuskällan som används i armaturen är enligt den unga branschfrivilliga standarden för LED-moduler, Zhaga..

Målet med detta examensarbete var att hitta, utvärdera och rekommendera ett nytt uppföljningsprogram för komponenter åt SOS Flygambulans. Genom kontakt med andra flygbolag hittades några olika program. Bland dem valdes två stycken ut som mest lämpade för SOS Flygambulans. Dessa två program var MTrax och CAMS. Med hjälp av demos från tillverkarna av programmen kunde de undersökas och beskrivas.