AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

In our study, we investigated how the streamed TV domain relates to existing design principles for web design. Further, we have investigated whether there are specific characteristics of the domain that the design principles do not cover. In the survey we have studied two sites which are representative of the streamed TV domain. Finally, we discuss how applicable the design principles are for the domain and the specific characteristics that would require new or further developed design principles..

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

För att Swepart Transmission AB ska fortsätta att hålla en hög standard på produkter som levereras till kunder, ska monteringslinan för Power Take-Off säkras. Budgeten som är avsatt till att kvalitetssäkra monteringslinan är 500 000 kr. Pick-to-Light och Pick-to-Voice är system som kan användas för att kvalitetssäkra monteringen av Power Take-Off. Systemen jämfördes med systemet med monteringskort som används i nuläget. Det mest lämpliga att införa har visat sig vara Pick-to-Light.I samband med införandet av detta system måste utredningar göras för vilka komponenter som behöver sensorer och vilka som kan säkras på andra sätt.

The final stage of a designers work is always a bit tricky. Design is an abstract phenomenon and no one can tell when a design is really finished. The design process that designers work within has been thoroughly studied but cannot be truly mapped with strict constraints which the designer can follow to succeed. Therefore, in this paper we take a look at the final stage in the design process. The main goal is to get more knowledge and highlight key factors about what designers face when they are about finish their design or what forces them to leave a project that can stay in development for eternity.

I work on a lighting design for a dance performance to be on tour. A lighting design adapted for three different conditions was made: - One comprehensive where I allow myself a great deal of creative freedom, adapted for the stages with major technical conditions. - One smaller version for stages with less equipment and with less time for preparation on site. - One design for very simple conditions. I also examine the specific differences between typical theatrical lighting design and typical dance lighting design, and the best way to prepare for the hands-on stage design phase..

AbstractMy task was to prepare the already designed heating list ?Stayhot? for manufacturing.I started with drawing the whole list in the CAD-program. It became obvious that some of the designed components had to be changed to work in practice.A turnable reflector couldn?t be combined with the isolation. The suggested light emitting diodes wouldn?t give enough light, so I cut them out and the problem with light remains to be solved.

Det här är en text som är ett resultat av vårt examensarbete vi genomfört under den sjätte och sista terminen på scenproduktionsutbildningen på Malmö högskola. Texten och examensarbetet utgår ifrån frågeställningar som vi arbetat med under terminen i samband med att vi ljussatt två teaterföreställningar som satts upp av Teaterhögskolan i Malmös examinerande masterelever. Vi tar upp frågor och tankar om ljuset, scenrummet och ljussättarens roll i det kreativa teamet. Syftet med detta arbete har varit att utforska hur vi kan ta hjälp av ljus och ljusdesign i skapandet av scenrummet. Hur vi definierar de rum vi arbetat i och hur det är att vara en del en produktion.

Gotland is an island with a rich history. One unique thing about it is the picturestones. There are, today, 565 known stones and fragments found on the island of various dating. The dating time spans from 400 ad to 1100 ad. This essay is meant to discuss the dating issue of the early picture stones dated to 400-700 ad and discuss the relevance and validity of the today?s dating.

In the west part of Trelleborg, on previous farmland a new society is under construction. It is situated right next to the ocean and close to the European freeway. Eight types of villages, all with different kind of architecture will be built in the area, one of them is Torns Village built by Skanska and Ikea. A concept called BoKlok. This specific village consists of twelve houses and five apartment buildings. They are all somewhat classical in their appearance with wooden panel, but at the same time they have a modern touch.

A design methodology to mitigate timing problems due to long wire delays is proposed. The timing problems are taking care of at architecture level instead of layout level in this design method so that no change is needed when the whole design goes to backend design. Hence design iterations are avoided by using this design methodology. The proposed design method is based on STARI architecture, and a novel initialization mechanism is proposed in this paper. Low frequency global clock is used to synchronize the communication and PLLs are used to provide high frequency working clocks.

Successful broiler production in hot climates requires knowledge of how birds are affected by heat stress. It is important with access to water and good ventilation to facilitate coping with the heat. It may be useful to reduce the consumption of feed during the hottest hours of the days, which together with a few hours of extra light available could improve both productivity and animal welfare. The vision in birds is superior to that of humans and most other mammals. Continuous light and light with low intensity can cause eye injuries, affect the eye development in young chicken negatively, as well as provide increased incidence of foot pad lesions. Access to light affects the production but also the welfare of birds.

Gotland is an island with a rich history. One unique thing about it is the picturestones. There are, today, 565 known stones and fragments found on the island of various dating. The dating time spans from 400 ad to 1100 ad. This essay is meant to discuss the dating issue of the early picture stones dated to 400-700 ad and discuss the relevance and validity of the today?s dating.

Companies constantly strive for the perfect order which enables them to satisfy and retain their customers. This is a difficult process that can be facilitated by using different picking technologies. In this study, a research of the picking technologies Pick-to-Light and Pick-to-Voice have been made to investigate when each technology is suited.In order to collect relevant information and data to be able to answer the question formulation, a qualitative study with interviews have been made. The purpose of this essay was to investigate Pick-to-Light and Pick-to-Voice to see when each technology is best suited and to see what the differences between the technologies are. With our essay we wanted to help manufacturing companies to make the right decisions when implementing a picking technology.The results showed that those picking technologies give companies a higher picking quality and an increased work efficiency since the order picking is faster to perform, and that picking errors are reduced.

This thesis introduces Kongjian Yu?s design approach in terms of industrial heritage conservation in connection to transformation and urban design. The approach is examined respectively on two cases from China and USA. The thesis give a brief introduction to current achievement in conservation research and general profile of industrial conservation practice. Based on case and theory study, Yu?s design approach is carefully applied to an industrial area Nyhamnen in Malmö and a design proposal is produced.