The trotting in Sweden has a good reputation in an international view, both in the perspective of success and how the sport is managed with focus on security, animal protection and animal welfare. A large number of equipment details are fitted on the horses during training and competition. The Swedish law of prevention of cruelty to animals regulate training and competition with racehorses, and propose to protect horses from unnecessary suffering. The equipment permitted in races is regulated in Tävlingsreglementet (The Regulation of Competititon) and in the regulations of equipment, that the Nordic Regulation Committee and Nordic Animal Welfare Committee have worked out. Due to training and competition the equipment must even meet the Swedish law of prevention of cruelty to animals. However, the behaviour or the senses of the horses is often affected by the equipment due to the way the equipment corrects, modifies, restrains or reduces the behaviour of the horse, which may cause the horse stress or discomfort.

This Thesis is performed in cooperation with Kalmar Industries in Lidhult, Sweden. Theprojects main purpose was to develop a draft design of a test equipment. The equipmentwill simulate and valuate the drive-train and brakes at Kalmar?s bigger forklifts.The equipment will be designed so the wheels of the forklift are placed on two rollers;these absorb and affect the forklifts brake- and driving force. With this characteristic anup- and downhill can be simulated.

This thesis for the Master of Science degree was performed at Oppunda Electronics AB. The assignment was to further develop an existing prototype of a dispensing equipment. The dispensing equipment doses a kind of glue, bonding which dentist use to mend teeth. The dispensing equipment is adjusted to dose 12 micro litres of bonding. With the dispensing equipment SafeBond Electronic the user can reduce the bonding consumption with approximately 50 percent.

GPS is perhaps the future in agriculture. The next years will show it but the precision becomes only better and better and the number of users becomes only more and more. This work shows experiences from today's users and how the profitability can be improved on a farm with normal plant cultivation. The aim is to show how big the actual advantage can be to have a GPS and how good precision there is with the equipment. John Deere and Trimble are the big producers of GPS equipment to the agriculture.

Background: The majority of the occupational accidents and work-related diseases at Swedish workplaces occur due to poor ergonomics during lifts and transportation of objects. The most common consequence of poor ergonomic conditions is low back pain (LBP) and the risk of developing LBP increases as the mechanical loading on the intervertebral disks grows. This study has investigated the biomechanical loading in the low back during two different types of patient lifts. The first lift (lift A) is developed by Modern Arbetsteknik (MA) and the second lift (lift B) is a common lifting technique among care workers. Objectives: The aim of the study was to identify any advantages or disadvantages with MA?s lift, regarding shear and compression forces in the L5/S1 disc.

This thesis is performed as a summarizing project for the mechanical engineering education at School of Engineering in Jönköping. All knowledge necessary to complete this thesis was gathered from previous courses and education.This project was to develop a new product for the company TR Equipment AB in Tranås. The new product is going to be based on an already existing product, TR 1700. TR 1700 is a bathtub equipped with a height adjustable function. This product is used in retirement homes and in the care of disabled people.

This study describes and reviews horse stable equipment from companies who builds and sells the equipment. In the study the companies various equipment was compared with regulations in the law of prevention of cruelty to animals. The purpose with this study was to find out if the companies stable equipment are approved according to the regulations within this area. The study used at five randomly picked companies.This study showed that three of the five examined companies refered, in one way or another, to the law of prevention of cruelty to animals on their website. Unfortunately not any of the companies referred to todays existing law of prevention of cruelty to animals.

Many everyday tasks and also many sports require good grip and forearm strength. Everything from carrying boxes and lifting a child to grab the arms and legs in various martial arts, or holding a tennis racket involving the hand and forearm muscles in various ways. It is therefore important to train these muscles to prevent injuries and congestion and to perform well in sport. A well known way to train functional strength in the hand and forearm muscles is weight training with thick handles. The purpose of this study was to investigate the differences in muscle activity in the upper arm and forearm muscles as well as the deltoids between two bars of different diameter (28mm and 57mm) in two different weight training exercises using electromyography (EMG).

Swedish Trotting association was formed in 1925. They are the ones who design the regulations concerning what is permissible and not permissible for the horse, driver and trainer, when they have a license at a Swedish racing track. The Veterinary department of Swedish Trotting association decides in consultation with representatives from veterinaries around the country what is allowed and not allowed, based proven experience, combined with the availability of scientific data and Veterinary Department's own assessment. After stricter regulations for good animal welfare from the Swedish government, Swedish Trotting association is going to work out a workable model for how new equipment can be tested in the future to see how the equipment affects the horse. In the future, all equipment will be objectively tested before approved. The purpose of this work was to develop a well-functioning model for this. The research-question for this work is: Is this study design a well-functioning model of how the equipment should be tested in the future? The equipment used for designing this model was bitless bridle with a bit.

The E-department at GETRAG All Wheel Drive in Köping have problems with the efficiency on parts of their production equipment. The equipment with the most significant efficiency problems are four automated multifunctional production cells that produces housing for rear drive units. The major part of the problem is the large amount of small stops that causes the low efficiency.The department already worked with logging of interruptions and efficiency calculations before this project started. However this work was not done to the extent considered necessary for a systematic follow-up of the interruptions.The aim of this paper is to point out a more effective and systematic way to work with logging of interruptions and the follow-up. In addition the equipment were studied with a method for efficiency calculation that ? if used properly- is a more powerful and a visually better method than the one used by the company today.As the initial current state analysis of the equipment was made a lack of documented knowledge about the equipment was discovered.

This thesis describes the redesign ofequipment designed for drying bags thatis used in Fresenius Kabis´manufacturing of their nutritionmedicine in Uppsala. The need of thistask arise during the start of thedevelopment of a new packaging line werethis equipment were meant to be used. Anevaluation of the bagdryers capacity andcapability was necessary.The work started with gathering ofinformation from suppliers of the usedcomponents and from the responsibleengineers for this equipment. Aneducation to learn how the equipmentworked and how to operate it were taken.That was followed by the creation of astudy plan were the tests were plannedto test different parameters effect onthe drying result and to see if thebagdryer managed to handle the bags ofthe correct format in the pace that theequipment should be designed for.The test results detected a need ofdesigning a unit with a function thatholds the bags in place while passingthrough the dryer in order to attainhigh quality results. The results werelater used for optimization of thedesign.

Syftet med detta examensarbete är att på uppdrag av Volvo Construction Equipment hitta en metod för att hantera och kategorisera idéflödet i deras idéhanteringssystem Interact. Den metod som användes var kvalitativ innehållsanalys. Slutsatsen är att metoden gick att använda för att kategorisera idéflödet men att ett material som sträcker sig över många ämnen tenderar att sänka tillförlitligheten på resultatet. Vidare bedöms materialet som detta arbete har producerat kunna användas för att bättre ta tillvara på idéer, vilket uppskattas av Volvo Construction Equipment..

People working with handling parcels in terminals are often victims of musculoskeletal injuries. This is largely due to the hazardous lifting of too many parcels which are too heavy and unsuitable work postures. The human body?s ability to lift and grasp objects is so outstanding that developing a device with the same capability is very difficult.The goal of the project has been to develop a technical device that will improve the handling of parcels with regard to ergonomics. The area of concern was the lifting of parcels between the conveyor belt and the cargo space of the freight car.

This paper deals with archery in the Viking Age settlement of Birka and in particular the presence of Euro Asiatic, steppe nomadic archery equipment at the Birka Garrison and one Birka grave. The equipment contains for example closed quivers and a bow case. This paper also contains a discussion of archery battle techniques and tactics in Viking Age Birka and the implications of the above mentioned equipment to this discussion. The analysis insinuates the importance and status of archery in 10th century Birka..

ABSTRACTThe discussions about energy use have increased year by year everywhere in the society, and so also in the healthcare sector. But what is actually energy use in a hospital facility, and what affects it?The typical way today to express the energy use is in kWh/m2. The problem with a key performance indicator that is expressed as energy use in relation to a specific area is that it does not take into account the activity in the building. Even though the activity to a very high extent affects the energy use.