In this thesis, three separate experiments have been performed on different aspects of the interaction between the causal agent of clubroot, Plasmodiophora brassicae, and its hosts. In the first experiment the pathotype of the P. brassicae single spore isolate, which is currently used to construct a reference genome, has been classified using the ECD bioassay. The disease severity of infected plants was scored according to two different scales and the pathotype was determined according to three previously published guidelines. The results were compared to previous published studies describing the e3 isolate. The life cycle of P. brassicae is not well understood.

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating costs throughout the investee Lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input data, and insufficient experience of workingwith LCC calculations.

New Economy Firms (NEFs) are considered being important drivers of economic development and growth in Sweden. Also, entrepreneurship is a widely discussed topic that is considered being essential for firms that are making business in a fast moving landscape. Usually, the growth of companies is put in context of the life cycle. The life cycle further implies that as a company moves from the startup-stage along the curve, the organizational structure increases. Further, increased structure is claimed to impede the entrepreneurial culture within the firm.

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating costs throughout the investee Lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input data, and insufficient experience of workingwith LCC calculations.

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating costs throughout the investee Lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input data, and insufficient experience of workingwith LCC calculations.

SammanfattningModular Management AB (MM) är en konsultfirma som arbetar med att implementera Modulära produktarkitekturer hos produktutvecklande företag. Företaget grundades i Stockholm år 1996 där huvudkontoret ligger än idag. De är världsledande inom sin genre och på grund av stor efterfrågan har kontor uppförts även i USAoch i Kina.Detta examensarbete är utfört på uppdrag av MM och har genomförts med hjälp av deras kunder i Finland samt kundens CAD-leverantör. Det behandlar modularisering och hur detta realiseras med hjälp av datorbaserad konstruktion (CAD). Detta är en MMs produkter och den kallas Modular Modeling.

This thesis looks at two sides of the same coin: how to support the production and future development at a specialist medical technology department at Danderyd Hospital. The two sides are; a pilot study of a product management system (PDM) and an interview based study on the characteristics of the silent knowledge of the technicians. The department (National respiratory centre, NRC) is facing retirement of several key employees.The technical study shows that the success of an implementation is largely dependent on the users? prior knowledge and use of a 3D Computer aided design system (CAD).The system itself is shown to fulfill the Lifecycle requirement of tracking the products (mostly tracheostomy tubes) but without a CAD centered workflow, some substantial education and preferably some new recruits, an implementation of the PDM system will fail. The author recommends development of the current ?low-tech? system of MS Excel and Access rather than redistribute the dependency from technician towards a complex, commercial software and its vendor.The analysis of the technicians? silent knowledge with the newly developed method, epithet for silent knowledge (ETK), shows that the longer employment time:the more differentiated technicians become in describing their work,practical knowledge are regarded higher andthe social and collective problem solving factors of the work becomes more important.Typically, it is shown that a new employee should preferably enjoy problem solving, being pragmatic and social as well as having some prior education or work experience in a CAD and/or a PDM system..

The Lifecycle of fashion products get shorter and shorter. Companies in the fashion business needto make sure that they can offer their customers the right products, in the right quantity at theexact right time. The competition on the fashion market today is tough and if companies aregoing to be successful they need to have access to the most reliable suppliers, and also offer theircustomers products with high quality to attractive prices. It is therefore of highest importance toevaluate and choose the right sourcing strategy. Product category and type of organisation aresome of the factors that will determine which strategy that is most appropriate.

The project this report is handling has been implemented on NBB, Nordisk Bilbelysning AB in Linköping. The company produces and develops lightning and searchlights for all types of vehicles. Lately NBB´s supplier of electronics, OSRAM, has developed a mercuryfree xenon lightsource. Mercury is one of the most hazardous environmental waste and to get rid of the mercury entirely in the lightsource is a big step that means alot for the environment.This lightsource will be placed in one of NBB´s worksearchlights called My, and will be sold as an alternative to mercurycontaining searchlights. NBB wants to put an environmental label on this product and they want to have essential information about the product that is needed for the production.

Single vehicle accidents are one of the most common types of accidents that occur on the Swedish road network. Depending on the design of the road, the presence of a crash barrier and embankment on the roadside, the outcome of a roadside collision can lead to serious injuries and even deaths.The aim of this project is to investigate the possibility of improving road safety by designing the optimal roadside area based on the results of a life cycle cost analysis (LCC).The questions that have been answered during the duration of this project are:1) Describe the current technical solutions for roadside area design and the various barrier types used in Sweden.2) Complete an existing mathematical model that has been developed by Hawzheen Karim, for calculating life-cycle costs for various roadside areas.3) Calculate and compare the life cycle costs for the side area with a barrier and without a barrier.By performing an analysis of the documentation on the current guidelines and rules for shaping the roadside, was it possible to describe the current technical solutions for the formation the roadside as well as the current roadside barriers in use today. A mathematical model for calculating the life cycle costs of different barrier types had already been developed by Hawzheen Karim. This model was supplemented so that it could calculate life-cycle costs of the roadside region with and without a barrier. After the model was completed, an analysis was performed to obtain life-cycle costs of a roadside with and without a barrier.The result showed that there is a clear relationship between the slope inclination, fill height, and the rate at which the costs rise.

Our employer Camatec Industriteknik AB gave us the assignments to increase theirs range of versions on Camcoil that is their own patent product. Camcoil is a capstan system that is used when steel band fabricated. Exist for example in production lines their steel band should be annealed. Our goal with this work is to come up with a completed production basis on a Camcoil for heavy industry. The basis should contain calculations, 3D-constructions, drawings and cost proposal on manufacturing and detail purchase.Demands on this project:1.

Infection with Parascaris equorum is common among young horses in Sweden as well as in the rest of the world. The parasite has a direct Lifecycle and reproduces in the small intestine. The eggs are passed out with faeces and become infective after approximately two weeks. The horses get infected when they ingest eggs that are dispersed in the environment. The symptoms seen in horses usually include retarded growth and loss of weight.

Denna studie behandlar bondehushållets försörjningsmönster och dess utveckling sent 1800-tal. Undersökningen fokuserar på ett svenskt hushåll åren 1870-1900, enperiod då jordbruksekonomin integrerades i marknader och ledde till ökad specialisering, nya jordbruksvaror, ökad rationalisering i produktionen och Bruksdöd för gamla näringar. Hushållet, Tomtas gård i Folkärna socken uti södra Dalarna, utgör ett av de bondehushåll i Sverige som själv dokumenterade processen genom bondedagbokens dagliga och vardagliga notiser.Den ekonomiska vardagen i bondehushållet har studerats för att förstå vad förändringarna innebar för människorna som direkt deltog i-, och påverkades av, marknadsintegreringen. Detta har skett genom att studera bondehushållets medlemssammansättning och tidsdisposition för olika arbetsmoment utifrån antagandet att husbondens livscykel hade en avgörande inverkan på bondehushållets försörjningsmönster. Livscykel förstås här som den tid då gårdsansvar innehas av en husbonde fram till dess att en ny husbonde, son eller svärson, tar över gården.

This study was the first part of a larger project investigating a new surveillance method for Echinococcus multilocularis. In this study we examined livers from wild boar (Sus scrofa), looking for lesions caused by E. multilocularis. E. multilocularis is a small tapeworm which has an indirect life cycle.

In today's producing companies, there is a high demand on early integrated productdevelopment. One way to facilitate communication between departments and collaborationbetween people and thereby enable early sharing of product information within the companyis to use PLM, Product Lifecycle Management.The CAD environment at Scania is at the moment being upgraded from Catia v4 to Catiav5. In this stage it is important that also the interacting computer systems in Scania?s PLMenvironment are adjusted and in the future join the development. Scania has an idea of howthese systems will be developed as the transition from Catia v4 to Catia v5 is being carriedout.