The Energy Market Inspectorate is implementing a new tariff regulation in Sweden. A small part of the new regulation concerns effectible operation costs and originally they where intended to be calculated using a modification of equivalent comparison standards, in Swedish Ekm. This thesis is intended to analyze if Fortums grid in Stockholm could be described correctly, using equivalent comparison standards. In Ekm every part of the distribution grid is designated a weighting in relation to 1 km 0.4kV over head line. These Ekm-measurements are intended to simplify comparison between different grid areas with different structure and geographical conditions.

With an increased demand for biomass based energy and with development of better technique harvest biomass, new possibilities open up. With the possibility to combine traditional cleaning of road?s right of way with biomass harvesting, the work of suppressing tree vegetation could become profitable or at least decrease the road maintenance cost. However, knowledge about productivity and profitability in mechanical biomass harvesting in roads? right of ways are still limited.

During the cultivation season there are a several cropping activities to carry out. At what time these activities are carried out is affecting the result and also on the economy of the crop production. As the production costs are high in potato production, it is important to keep an eye on the economy. Profitability is the most important factor in most crop production systems. If the costs are not covered, it is difficult to justify the production.

Every organization goes through the same lifecycle. Through every step in the transformation to a better organization the communication structure changes. In this report there are examples of the communicational disadvantages that is connected to the communicational structure.By choosing to not have a formal communicational design, the manager takes a risk in spreading the information, the interaction, the control and the balance in creativity and constraint.This case organizations problem is that some parts of the organization has made more progress in the communicational structure than other parts. In this case the Collectivity structure has met the Formalized structure.Tha structural differences has came to affect the way of sharing information and it has become a situation where the information about the products is not stored in a safe way from a quality point of view. There is a gap between the two different ways of communicate.In this report I have created a model to identify problems in the communication structure.

With the globalization, companies in the West chose to shift production to developing countries to cut down costs. This had a major impact when child labor and very poor working conditions in these factories were discovered and led many companies to take responsibility for their suppliers and the employees by adopting voluntary so-called Codes of Conduct.There is a subtle balance to enforce improvement of working conditions for employees at suppliers´ factories and to keep costs down. On the one hand, companies would like to conduct extensive audits at their suppliers to ensure code of conduct compliance and thus protect their legitimacy. On the other hand, audits are expensive so companies would like to minimize audits to keep costs down. Companies thus have to strike a delicate balance in relation to how many and what suppliers they choose to audit.

Ever since it was first introduced in an article in the Journal of Finance 1952, Harry Markowitz? mean - variance model for portfolio selection has become one of the best known models in finance. The model was one of the first in the world to deal with portfolio optimization mathematically and have directly or indirectly inspired the rest of the world to develop new portfolio optimization methods. Although the model is one of the greatest contributions to modern portfolio theory, critics claim that it may have practical difficulties. Partly because the Markowitz model is based on various assumptions which do not necessarily coincide with the reality.

This master thesis has three purposes. The first purpose is to give a theoretical background of how to divide up forest estates and to study how the legal system for these matters works. A literature study has been carried out to give the background and a theoretical model has been made for analysing the law cases. The first purpose also partly touched the decision process in dividing up forest estates from point of view of the law of land parcelling (FBL), point of view. The second purpose is to examine effects of a change of production requirements in 3 cap.7 § FBL as regards dividing up forest estates of private forest owners.

Syftet med detta examensarbete är att sammanställa maskinkostnader för etableringsmetoderna plöjningsfritt och konventionellt. Vi vill även titta på hur stor kapacitet som behövs på maskinparken för den tänkta gården på 600 ha åker, detta för att hinna etablera grödan inom ett rimligt tidsspektra. Anledningen till att vi valt ett företag på 600 ha är att det är den areal tröskan klarar av att avverka inom rimlig tid. Det medför att vi måste ta en del hänsyn till lägligheten och hur mycket av tiden som är så kallat ?tjänligt väder?.

This study will chart the changeover work, with a standpoint in the SMED-theory, at the company Peter Ernst AB in Värnamo. They are suppliers in plastic moulding industry and delivers to amongst other Saab in Trollhättan and Scania. The company are in a very competitive market, and they have to make manufacturing more efficient and rationalise their costs to be able to compete. A big problem, which the company has identified, is their long changeovers. It brings higher costs, a more stressful work climate and holds back the company from becoming more efficient.Field studies will be conducted on the changeover, which will be observed and filmed.

The costs of logging and of transportation with truck are dominating the total cost of wood delivered at industry. To support the profitability for the members' forestry the processing and handling with the timber has to be as efficient as possible. Increased length of pulpwood in thinning is one conduct that can result in higher productivity and/or lower costs. The study is scaled as a system analysis with the aim to exemplify the differences between working with 3- and 4-meter as standard length of pulpwood, related to biological aspects, timber receipts, cost of logging and cost of transportation with truck. Important aspects are if the change is technically and biologically feasible and economically profitable.

The cost of construction projects have increased during the past few years. Different actors in the construction industry work together to advocate various measures to mitigate these cost increases. One of these measures is to try to improve the efficiency in the phase of production. By striving for a kind of standardization with a constant quest for improvement, the productivity can increase while the costs of production fall.For this thesis has a case study been conducted at the construction company JM AB which is seeking this. They call the approach structured production and have implemented various measures to achieve a more productive output.Based on information from reconciliations, the cost and the spent hours of craftsmen have been analyzed at the company where the case study took place.

With the globalization, companies in the West chose to shift production to developing countries to cut down costs. This had a major impact when child labor and very poor working conditions in these factories were discovered and led many companies to take responsibility for their suppliers and the employees by adopting voluntary so-called Codes of Conduct.There is a subtle balance to enforce improvement of working conditions for employees at suppliers´ factories and to keep costs down. On the one hand, companies would like to conduct extensive audits at their suppliers to ensure code of conduct compliance and thus protect their legitimacy. On the other hand, audits are expensive so companies would like to minimize audits to keep costs down. Companies thus have to strike a delicate balance in relation to how many and what suppliers they choose to audit.

The purpose of this paper has been to follow how a decision made has developed within anorganization. We have intended to find underlying causes for the development in order to contribute to the understanding of the lifecycle of decisions.The decision we have chosen is Gröna Skolgårdar (Green School Yards) within the city of Västerås. This project has aimed to make the school yards in Västerås more green, more beautiful and more useful for teaching.We have used Grounded Theory Method as our foundation, complemented with decisionmaking theory.The work with this paper has led to the conclusion that Gröna Skolgårdar changed over time, and did not turn out as first intended. This has had several couses such as how resources wasdistributed, political changes, and different views of the project.We have learned that over time a decision can take unexpected paths, and we have contributed with an example of how this can happen..

In this thesis proposals for different designs of a borehole thermal energy storage (BTES) have been developed for the building DN-huset in Stockholm, Sweden. To build a BTES results in savings in energy costs by approximately 44 %, i.e. 2 million Swedish crowns annually. Furthermore, a BTES would reduce the annual environmental impact with roughly 75-157 tonnes of CO2 equivalents per year, depending on how the electricity consumption?s environmental impact is estimated.

The projects objective is to find an alternative method of heating (the current method being via electric heating) the sewage treatment plant on the island Utö in Stockholm?s archipelago in order to reduce the energy consumption and ultimately the cost for heating the plant. The project is given by ?Skärgårdsstiftelsen? (The Archipelago Foundation) and is a part of the larger EU-project ?Green Islands?.A model for the plants total heating demand is established in order to get a good perception of how much money can be saved using alternative heating methods. The heating demand model gives an annual heating demand of approximately 32 500 kWh and a maximum heating power demand of around 24,7 kW.