The goal with this examination thesis is to investigate the difference in carbon dioxide emissions between a building with a wooden versus concrete carcassing from a life cycle perspective. The huge amounts of carbon dioxide released into air from human activities must be reduced to prevent serious consequences. A way to limit this issue is through performing a comparative study where the result shows which of two products with the same function has the lowest emission of carbon dioxide, whereof the product with the lowest carbon dioxide pollution can be chosen.To be able to perform a study like this an object has been chosen and studies about life cycle analyses have been done. The rental square meter, the thermal conductivity value, the energy requirements and the placement of the building has been set equal in both framework types. There were solely dissimilarities of the two buildings taken into account when this comparison study was performed.The result of the study is that a building constructed with a wooden carcassing has the lowest amount of carbon dioxide emissions.

The environmental demands are increasing when it comes to product development. EcoDesign isabout minimizing the environmental impact of a product, considering the entire life cycle of it,without compromising other qualities like function or cost. In this master of science thesis amobile phone has been analysed with Ten Golden Rules in EcoDesign regarding production, useand End of Life. Also a functional and an environmental profile were made. The goal was tomake a new concept phone, based on the previous analysis, which communicates userfriendlinessand sustainable development.

In this report an MCNP (Monte Carlo N-Particle) model is described for the reactor vessel at Ringhals 2. The model is validated against the specific activity in neutron dosimeters, extracted in 1977, 1984 and 1994. The validation showed that the calculations of the model are within the requirements of a maximum of 20 percent uncertainty for every neutron dosimeter except one, extracted after the first cycle. The uncertainty of this cycle was mostly due to the operation data rather than to the MCNP model.The model has been used to investigate various questions concerning radiation damage. The reliability of the traditional measure of radiation damage, fast neutron flux (En > 1MeV) has been evaluated.  This has been done by taking the ratio for this and another measure of radiation damage, DPA (Displacement Per Atom), for various positions and layers.

This report is a thesis for collegeengineering program in structuralengineering at Uppsala University andwas commissioned by the Swedishcontractor Svevia. The study aims toprovide an overview of the mostbeneficial bridge material from bothenvironmental and economic point ofview.The life-cycle analysis covers onlycarbon dioxide emissions, since it isthe most spoken of in today?s climateagenda. Furthermore, this study aims tohighlight which parts, of the systemboundary, that contributes to greatercarbon emissions for the wood- and theconcrete bridge.The life-cycle cost analysis wascalculated with a lifespan of 40 yearsand covers the basic cost of investment,operating and maintenance, anddecommissioning costs.The analyzed constructions in this studyare existing projects that are almostcompleted. Both bridges were designed tohandle loads up to 60 tons.

The purpose of the study was to discover how nurses can maintain a good quality of life for cancerpatients at the end of life. We examined seven scientific articles in accordance with Polit, Beck & Hungler (2001) criteria for scientific validity. We used Carnevali's (1996) model of demand and resources as a frame of reference. The results showed that physical, psychological, social and spiritual needs affect quality of life in different ways. It also came out that it was difficult to measure something as individual as quality of life..

In this report a model was constructed in order to determine how a number of covariates influence the gross domestic product, GDP. The covariates were chosen depending on their expected influence on GDP, for example education and life expectancy. The data used in this report are collected from the World Bank. The model to describe GDP has been calculated using multiple line arregression. In order to reach a reliable final model the number of covariates has been gradually decreased to eliminate insignificant covariates.

The Psychology Driving and Barriers to Skunk Work Projects (referred to throughout this thesis as the paper) represents a study predominantly on Tetra Pak from a selective perspective, the innovators. Innovators both past&present whose initiatives contribute to the well being of Tetra Pak as well as one from Ericsson were consulted. As with individuals, organizations possess definable characters that are influenced by the various stages of their life cycle. Theories of corporate life cycle phases and organizational character analysis were therefore employed to identify and explain organizational barriers to skunk work leaders&managers. Predicated on the Organizational Character Index survey developed by William Bridges PhD (himself a recognized leader in the field of transition management) and administered to sixty-one managers within a Tetra Pak business unit established the benchmark.

This report analyzes disposable packaging and returnable packaging with the methods life cycle analysis and life cycle costs analysis. These two different packaging are analyzed through the company Clas Ohlson?s packaging-flow. To get a picture of how the flow works, a visit at the company and email contact have been done with Clas Ohlson to get relevant informationToday Clas Ohlson has a big flow of articles to the stores without larger variations in the demand, with the exception of autumn, which is when customers start shopping for Christmas. Clas Ohlson?s articles are placed on a pallet and are wrapped into plastic-film for protection and to make sure that nothing will be stolen.

The development for Skanska Commercial Development (SCD) during the last years has been positive on all markets and Skanska therefore plans on expanding their activity. Central and Eastern Europe has had a considerable economic development, what is assessed to continue during the next following years. Bucharest is one possible alternative in the CEE for a new establishment by SCD. However, the investigation before an entry is a process with many factors that need to be taken into consideration. There are today no models on how and what a developer as SCD should evaluate in terms of opportunities and risks on a possible new market.

The cell cycle is the time a cell spends between two cell divisions. The cell cycle includes several parallel processes, all of which must be completed before a cell is mature for dividing. In the first place, all subcomponents (RNA, protein and membrane lipids) need to double in quantity and this occurs continuously through the cell cycle. Furthermore, the genome and some chromosomal proteins must double and this take place during a limited interval in the middle of the cell cycle (S-phase). On either side of the S-phase are two "gaps" which is called G1 and G2. When the cell has passed a point in the G-phase they are irreversibly programmed to progress through the remaining of the cell cycle and will undergo the next cell division. When a cell have passed a point in the G1 phase, approximately four hours after mitosis, a normal cell is in a state of indecision.

This paper aims at assessing the relationship between female and male part-time employment and the business cycle in Sweden during the years 1987?2005 using quarterly time-series data and two alternative indicators of the business cycle. It further aims at determining whether the share of women working part-time has changed over time. Key results include that the relationship between the business cycle and female part-time employment is found to be significant and countercyclical. No significant effect is however found for men.

This thesis concerns how Sweden relates to life cycle assessment (LCA) in the construction process. LCA means analyzing a products impact and the analysis includes the whole life span of the product. A building has a high complexity and the combination with its unique shape will make the LCA more comprehensive, unlike e.g. aluminum cans. Recently there has been a development of a working procedure in the construction industry.

Introduction: Studies have shown that women are not always satisfied with the effects of contraception and that contraceptive advice is perceived as non-specific. Aim: The purpose of this study was to investigate what contraceptive women have chosen to use in the different phases of their reproductive lives, and what they felt had influenced their choice. Method: A retrospective cross-sectional comparative study with a quantitative approach. A survey with fixed and multiple-choice options was sent to five hundred 45-year old women. Result: The study shows that various birth controls are different in the normal reproductive life.

An increased awareness about the global warming has created a demand for more information on how the climate is affected by different activities.This master thesis was initiated by Tricorona, a Swedish company that offers its customers analysis and calculation of their climate impact. Tricorona also supplies climate neutralisation with CERs, in accordance with the Kyoto protocol and controlled by the UN. This work demands updated emission factors for greenhouse gases. An emission factor gives information about the greenhouse gasintensity of a service or a product [kg CO2-eq./ functional unit].The purpose of this thesis is to examine how electricity, district heating, hotels, taxis, food and materials affect the climate and how emission factors for these areas can be calculated.This was done by reviewing and comparing different studies and by interviewing experts. The information was evaluated and recommendations on calculations and emission factors were made.The consumption of energy is the main source of greenhouse gas emissions for district heating, electricity, hotels, taxis and materials.

Tumble dryers and drying cabinets have to a large extent replaced the traditional way of drying clothes outdoors. They are faster, more convenient, require less space and can be operated regardless of weather conditions. This replacement has significantly increased residential energy consumption, due to the fact that tumbles dryers consume large amounts of electrical energy. In the USA 9 % of the households electric energy is consumed when drying clothes. Over 4 million tumble dryers are sold in Europe each year and 20 % of the residential electricity consumption in Sweden is used drying and washing clothes.