This project was started within the Market-Design programme of Elforsk, with the aim of developing representative test systems of Swedish distribution networks. Using such test systems as a basis for reliability and customer interruption cost calculations makes it feasible to analyse the network tariff regulation of Swedish power  istribution companies. In particular, it enables studies of the incentives for companies to invest in system reliability. Until now, the available test systems are either not representative of Swedish conditions, or too small in scale and limited in function.Within this project we have created two test systems. In order to represent the diversity of actual Swedish distribution networks, we have created one test system for urban environments and another for rural environments.

This thesis, in the field of healthcare logistics, has been carried out at Hjärt- och Medicincentrum (HMC) at the University Hospital in Linköping during the fall and spring of 2012/2013. The thesis is done by two students at Linköping University at master?s level within the framework of Industrial Engineering and Management.As Sweden's county councils should not make a profit or loss, it is important that the councils are aware of how much care processes cost. Kardiologiska kliniken at HMC in Östergötland?s county council is one of the clinics that are profitable.

The objective of this M. Eng. Diploma work was to validate the new version, CASMO-5M, and compare the results with CASMO-4E, by using the same input in both programs. The tasks that were included in this work was to compare TIP-measures, k-effective curves (warm), k-effective curves (cold), the effect of void on k-effective, the isothermal temperature coefficient (ITC), the moderator temperature coefficient (MTC), damping ratio calculations, internal effect in a fuel bundle of a BA-rod, the speed of BA-out burn, impact of xenon, falling control rod, margins and isotopes.The TIP-measures showed that the differences were small for all reactors, at most, 6% nodal improvement by C5M (Casmo-5M) for Oskarshamn 3. The warm measurements of k-effective showed that C5M had a higher value for all cycles of Oskarshamn 1, 2 and 3 in comparison to C4E (Casmo-4E).

The primary purpose of this paper is to find the determinants of first-day returns on the Stockholm Stock Exchange. Our research will cover the 1996 ? 2004 periods. Our secondary purpose is intended to find a profitable trading strategy with regard to future IPOs on the Stockholm Stock Exchange. By using regression analysis, focusing on company specific factors and the IPO process, we hope to find a function exhibiting statistical significance, determining future first-day returns from which construction of a profitable trading strategy will be possible.

The milk production per cow has increased considerably during the last 50 years and due to the breeding for higher milk production also brings decreased reproduction efficiency. In a Swedish study 1996 it was shown that on average only half of all estruses were detected. Every time a farmer fails to detect oestrus it costs the farmer about 1200 Swedish crones and the need of means of detecting oestrus is therofore large. With this study we wanted to investigate if heart rate respectively crystallisation of vaginal mucus (arborisation) could be useful means of detecting oestrus. We monitored two oestrus cycles in four heifers.

Det här är en undersökning om holländares val att flytta till Värmland och att starta eget företag sett utifrån ett work-life balance perspektiv. De teorier som har använts är främst work-life balance teorin men även teorier som behandlar flexibilitet, arbete och att starta eget företag återfinns. Inom work-life balance går jag igenom hur olika typer av förändringar i samhället har påverkat och påverkar balansen mellan arbete och fritid. Det tas även upp olika typer av beslut och gensvar som individen kan ta och göra för att motverka obalansen, men dessa individuella beslut är på något sätt relaterade till andra, som till exempel, kommunens gensvar.Jag har använt mig av kvalitativ metod där jag intervjuat nio respondenter i min undersökning. I analys och resultat kapitlet redogör jag för mina upptäckter utifrån den analys jag gjort av mina respondenters berättelser och kopplar det till de teorier jag använt mig av.

The objective of this thesis was to present a design proposal on a modular mechanicalstructure for a nanosatellite. The size of the structure should follow the CubeSatstandards. This standard divides satellites in units (U), where 1U is equivalent to acube where sides measure 100 mm. 2U corresponds to the same volume and size as2 assembled 1U structures, and so on. The focus was to develop a structure in theorder of 3U and 6U.At the integration in the satellite launch rocket, there are a couple of differentinterfaces, where the structure is adapted to common ones; P-POD and CSD.

To increase the understanding of how individuals total life situation affects their stress level and health has lately more frequently been discussed in different contexts. Furthermore, it is important to have knowledge of power structures that exist under given circumstances in a society to get an increased understanding of how to structure the health promoting work to get the highest possible benefits. People?s work life is essential to their health, since we spend a lot of time at work. The aim of this study was to find out which factors that relate to nursing staff?s health and stress level from a general perspective.

Background: Patients with heart failure is a patient group growing in numbers, the most common treatment focuses on reliving symptoms and the only cure is heart transplantation. Objective: Aim of the study was to illuminate patients' experiences of living with heart failure at his home. Method: Qualitative design, with a manifest content analysis. The results are based on 12 scientific articles.  Results: Patients with heart failure find that the disease is limited to their daily lives through mental illness and physical symptoms.

There are several possibilities for those with an eating disorder, who wishes to get treatment and recover to get help and support. But for those who are not ready to recover, there are not any help to receive. Pro-ana is a youth culture where individuals who want to achieve the anorectic ideal help and support each other. The purpose of this study was to describe and analyse the content and the need for the Pro-ana community on Internet, among young people with eating disorders. More specifically the aim was to find out how young Swedish people uses the Pro-ana communities on Internet.

The goal with our research has been to describe how often and in what way female athletes are represented in the sport section in Sweden?s biggest evening newspaper Aftonbladet. The material we?ve used are the newspapers that we collected during two weeks in 2008, the 3rd of November to the 9th of November and the 11th of November to the 17th of November. We?ve conduced two qualitative researches ? a text analysis and an image analysis ? and one quantitative analysis on our material.

Competition of spruce fiber raw materials has increased dramatically in the last few years, leading to the fact that transportation costs in the current situation represents a much larger share of the total raw material cost. The Holmen-owned pulp industry Hallsta Paper Mill's location on the coast also constitutes a problem, because of the lack of raw material, which is much larger there, than for a pulp mill located in the hinterland. For a coastal industry it?s therefore natural to import much of the raw material by boat or to buy it from the timber terminals, in order to maintain good profitability. The purpose of this study was to analyze how the size of Hallsta Paper Mill timber supply area, without competition, with competition and with terminal use, affects the company ?s transport costs.

Latent heat storage is a way to store thermal energy when a phase change material undergoes a phase change. The advantage of latent heat storage is the capability to store more energy per mass unit than other heat storage methods. The most commonly used phase change in latent heat storage is the transition between solid and liquid. Phase change materials can be divided into organics, inorganics and eutectics.In the Nordic electricity market the price of electricity is set every hour by Nordpool spot, which leads to price fluctuations because of changes in demand. The main goal of this report is to create a latent heat storage system in a single-family home and investigate the possibility to save money by charging the latent heat storage system when the price of electricity is low, and discharge when the price is high.The thermodynamic model consisted of a ?tube-in-tube? heat exchanger with phase change material in the outer tube and water as the heat transfer fluid in the inner tube.

To achieve a working collaboration in a big, complex organization where there are vast requirements on both quality and profitability is not always an easy task. An example of this is the organization that was created in the Swedish railway industry following a series of deregulations during the past 25 years. A partial market in this organization is the railway maintenance. In order to achieve a working collaboration between actors in this organization the so-called Purchaser-provider model (PPM) is presently used for the procurement of rail maintenance projects. Previous research has shown that this market-based instrument has clear positive effects regarding the cost-efficiency but hinders the collaboration.

This final project is an investigation about the responsibility in rooms where the walls and floors are exposed or partly exposed to irrigation of water, as a bathroom, laundry room and WC. The cost for all water damage is valued for 5 000 000 000 SEK each year. How is this possible with all information about the problem and good materials? Who is responsible? Incites had been made in the subject throw reading reports and participation in courses about how to make a room mention above. Discussions have been made with workers in the trade of making the walls waterproof.The conclusion in the rapport is about who´s responsible for the damages and will pay the cost of the renovation. The responsibility is discussed between the contractor and the insurance company.