Single vehicle accidents are one of the most common types of accidents that occur on the Swedish road network. Depending on the design of the road, the presence of a crash barrier and embankment on the roadside, the outcome of a roadside collision can lead to serious injuries and even deaths.The aim of this project is to investigate the possibility of improving road safety by designing the optimal roadside area based on the results of a life cycle cost analysis (LCC).The questions that have been answered during the duration of this project are:1) Describe the current technical solutions for roadside area design and the various barrier types used in Sweden.2) Complete an existing mathematical model that has been developed by Hawzheen Karim, for calculating life-cycle costs for various roadside areas.3) Calculate and compare the life cycle costs for the side area with a barrier and without a barrier.By performing an analysis of the documentation on the current guidelines and rules for shaping the roadside, was it possible to describe the current technical solutions for the formation the roadside as well as the current roadside barriers in use today. A mathematical model for calculating the life cycle costs of different barrier types had already been developed by Hawzheen Karim. This model was supplemented so that it could calculate life-cycle costs of the roadside region with and without a barrier. After the model was completed, an analysis was performed to obtain life-cycle costs of a roadside with and without a barrier.The result showed that there is a clear relationship between the slope inclination, fill height, and the rate at which the costs rise.

Our common future involves many important challenges. People and nature need to improve the relationship in order to reach an ecologically sustainable development. In a society where consumption of products steadily increases, the consumer awareness about social and environmental issues connected to the products becomes an importent factor. More and more companies choose to work more actively with these issues and more and more products get labelled by some of the eco labelling organisations. From the cradle to the gate means that a study has been done on a part of a products life cycle.

The aim of this study was to analyze the assessment of the primary school, from the teacher?s perspective. There has been an ongoing discussion regarding assessment and about the purposes of assessment for a long time. But there is a paucity of research on what teachers believe about. This study examined primary teachers? beliefs on major purposes of assessment.Assessment is the process of gathering and interpreting information about students? learning.

The aim of this study was to analyze the assessment of the primary school, from the teacher?s perspective. There has been an ongoing discussion regarding assessment and about the purposes of assessment for a long time. But there is a paucity of research on what teachers believe about. This study examined primary teachers? beliefs on major purposes of assessment.Assessment is the process of gathering and interpreting information about students? learning.

AbstractPain among patients in their final stage of life is a commonly occurring problem. Results fromthe Swedish Register of Palliative Care (SRPC) indicate that validated instruments forassessing pain are rarely used. Nurses' insufficient knowledge of pain and pain treatmentmethods may be a cause of maltreatment of patients who suffer from pain.The goal of this study was to determine whether training within the area of pain, painassessment and pain assessment instruments increases the use of validated pain assessmentinstruments utilized by nurses working in care homes for patients in the final stage of life inthe city of Uppsala.Method: A quantitative and quasi-experimental design was selected to perform the study.The intervention study that was used consisted of one training session where onequestionnaire was given before and one after the time of training. Register data were collectedfrom the SRPC given the question of pain assessment before and after the intervention.Results: The study showed that nurses more often used pain assessment instruments after thetraining session. The results also showed that nurses to a greater extent than before alternatedbetween the two validated pain assessment instruments that were introduced at the trainingsession.Conclusion: The results showed that when nurses at care homes are given training in the areaof pain and pain assessment they absorb and use the newly acquired knowledge in theirclinical work..

New Economy Firms (NEFs) are considered being important drivers of economic development and growth in Sweden. Also, entrepreneurship is a widely discussed topic that is considered being essential for firms that are making business in a fast moving landscape. Usually, the growth of companies is put in context of the life cycle. The life cycle further implies that as a company moves from the startup-stage along the curve, the organizational structure increases. Further, increased structure is claimed to impede the entrepreneurial culture within the firm.

The aim of this study was to analyze the assessment of the primary school, from the teacher?s perspective. There has been an ongoing discussion regarding assessment and about the purposes of assessment for a long time. But there is a paucity of research on what teachers believe about. This study examined primary teachers? beliefs on major purposes of assessment.Assessment is the process of gathering and interpreting information about students? learning.

In recent years, the Swedish railway track system has been neglected in terms of capacity and maintenance. To adapt the existing system to current traffic load there is a great need for extensive improvement and maintenance. Shortcomings are especially occurring on older embankments running over soft subgrades. To select the most suitable method for reinforcement of the embankment, it is important to evaluate different solutions from a life cycle cost perspective. In long-term perspective, it is often shown that a method with low investment cost causes a higher maintenance cost and a shorter technical lifetime.

Författarna har haft ett samarbete med Panduro Hobby i samband med deras årliga miljökampanj. Syftet med examensarbetet har varit att med hjälp av befintliga produktutvecklingsprocesser och livscykelanalyser (LCA) ta fram en hållbar textil produkt med växtfärgning. Tanken var att konsumenter sedan själva skall kunna ta fram och växtfärga denna hållbara textilprodukt. Miljömedvetenhet och hållbarhet inom textilindustrin är ett aktuellt ämne. Trots det saknar dagens konsumenter förståelse för textilindustrins påverkan på miljön och har bristande kunskap om textila material för att kunna göra miljövänliga val ute i handeln.

Detta arbete behandlar problemområdet systemförvaltning och är en vidareutveckling av förvaltningsmodellen vid systemförvaltningsprocessen. Vid systemförvaltningsarbetet finns det olika förvaltningsmodeller som kan vara ett stöd vid taktisk och operativ styrning samt administrativ kontroll.Systemförvaltningsmodellen består generellt av sju olika rekommenderade delmodeller där bland annat systemförvaltningsprocessen ingår. Modeller för systemförvaltningsprocessen bör förenkla, effektivisera och ge stöd när systemförfrågningar samt systemkrav inkommer från verksamhetsledningen eller systemanvändaren. Undersökningen i detta examensarbete fokuserar på en vidareutveckling av modellen Application Maintenace Cycle (AM/Cycle) som utvecklats av Peder Brandt.Vidareutvecklingen i detta arbete resulterar i en modell för systemförvaltningsprocessen, vilken benämns Application Maintenace Schedule Cycle (AMS/Cycle). Litteraturstudier och intervjuer har påvisat vissa svagheter med modellen AM/Cycle, vilket tagits i beaktande vid vidareutvecklingen av AMS/Cycle.

Aim: The purpose of the study was to investigate how the assessment and grading is designed and practiced in the practical courses of physical education at GIH - the Swedish School of Sport and Health Sciences, along with how it could affect newly graduated physical education teachers? ability to assess and grade students. The study was based on Habermas?s system and life-world theory.What view occurs concerning proficiencies, basis for assessment and marking among teachers who are responsible for examinations within physical education at GIH?How is the examination structured within physical education at GIH?How are skills and proficiencies among assessment and marking further mediated to students in the teacher education at GIH?Method: The case study was realized by performing qualitative interviews with a total of four teachers at physical education at GIH. Additionally, syllabi were text-analyzed to improve the validity of the study.Results: From the results we found that the teachers experience marking as a complicated assignment, where particularly the didactic ability but also the practical ability form a formative and summative assessment.

Background: Pain can be a constant problem in many older people's daily life, associated with particular physical and social disability, depression and poor quality of life. Dementia diseases are often associated with old age. Communication difficulties are one of the consequences of the disease, which clarifies the role of nursing staff in detecting and assessing pain. Objective: The aim was to compile knowledge about how nursing staff can identify pain in people with dementia. Method: A systematic literature review, where data were collected through manual and database searches.

Assessment of the level of the pupils´ knowledge and understanding are important parts of teaching. There are diverse ways to do this and many different tools to use.The purpose of this study is to explore, through qualitative interviews, how five teachers work with assessment. The focus lies on both how they work with assessment in general and how they use the assessment tools called »LUS» and »Nya språket lyfter!». The pupils´ participation in their own education is an important part of the Swedish curriculum, which is why the study also focuses on how the informants work to enable the pupils´ participation in the assessment and in their education.The informants all think that both assessment and the pupils´ participation in the assessment are important, since teaching is easier when the pupils are aware of what they need to know and learn. Many of the informants express that time is an issue when it comes to making the assessment trustworthy.

An increased awareness about the global warming has created a demand for more information on how the climate is affected by different activities.This master thesis was initiated by Tricorona, a Swedish company that offers its customers analysis and calculation of their climate impact. Tricorona also supplies climate neutralisation with CERs, in accordance with the Kyoto protocol and controlled by the UN. This work demands updated emission factors for greenhouse gases. An emission factor gives information about the greenhouse gasintensity of a service or a product [kg CO2-eq./ functional unit].The purpose of this thesis is to examine how electricity, district heating, hotels, taxis, food and materials affect the climate and how emission factors for these areas can be calculated.This was done by reviewing and comparing different studies and by interviewing experts. The information was evaluated and recommendations on calculations and emission factors were made.The consumption of energy is the main source of greenhouse gas emissions for district heating, electricity, hotels, taxis and materials.

With recent technical development computer aided design and manufacturing has taken amore important role in the product life cycle. New business segments such as Product/ServiceSystems and remanufacturing is emerging. This development demands better control of theproduct data throughout the entire product life cycle. Computer aided design is widelyrecognized and used within the manufacturing industries and in recent years the importance ofDigital manufacturing has increased. One part of Digital manufacturing is paperlessproduction which involves all orders and working instruction shown for example on a screenrather than on a piece of paper.