Sök:

Sökresultat:

5325 Uppsatser om Life Cycle Cost - Sida 3 av 355

Markberedning med traktorgrävare, prestation och kostnad

This study investigated the performance and cost of scarification with a tractormounted excavator. Due to variations in terrain conditions the performance variedbetween 0.08 and 0.11 ha/E15h and, with a machine cost of 366 SEK/h, the cost ofscarification varied between 3 330 and 4 750 SEK/ha..

Managing IT Costs by ABC

The purpose of this essay is to identify costs for providing First-line and Second-line support, and then allocate these cost to different goods and services (cost objects) being supported. The thesis also intends to improve the overall cost awareness in IT settings..

The Psychology Driving&Barriers to Skunk Work Project

The Psychology Driving and Barriers to Skunk Work Projects (referred to throughout this thesis as the paper) represents a study predominantly on Tetra Pak from a selective perspective, the innovators. Innovators both past&present whose initiatives contribute to the well being of Tetra Pak as well as one from Ericsson were consulted. As with individuals, organizations possess definable characters that are influenced by the various stages of their life cycle. Theories of corporate life cycle phases and organizational character analysis were therefore employed to identify and explain organizational barriers to skunk work leaders&managers. Predicated on the Organizational Character Index survey developed by William Bridges PhD (himself a recognized leader in the field of transition management) and administered to sixty-one managers within a Tetra Pak business unit established the benchmark.

The role of cell cycle control mechanisms in regulated and sustained cell proliferation

The cell cycle is the time a cell spends between two cell divisions. The cell cycle includes several parallel processes, all of which must be completed before a cell is mature for dividing. In the first place, all subcomponents (RNA, protein and membrane lipids) need to double in quantity and this occurs continuously through the cell cycle. Furthermore, the genome and some chromosomal proteins must double and this take place during a limited interval in the middle of the cell cycle (S-phase). On either side of the S-phase are two "gaps" which is called G1 and G2. When the cell has passed a point in the G-phase they are irreversibly programmed to progress through the remaining of the cell cycle and will undergo the next cell division. When a cell have passed a point in the G1 phase, approximately four hours after mitosis, a normal cell is in a state of indecision.

Livscykelanalys för koldioxidutsläpp från flerbostadshus

Today, about 15 to 20 percent of Sweden?s total emission of carbon dioxide can be traced to the household sector. By examining apartment blocks in a life cycle perspective, the origin of the carbon dioxide emission has been charted and analyzed. This information has been used to create a computational model that calculates the total emission of carbon dioxide from a specific apartment block. The results from the analyzed apartment blocks indicate that both the use of energy and the emission of carbon dioxide have been reduced since the 1960s. Through the examination of building materials, it is possible to lower the emission of carbon dioxide that origins from the construction phase of an apartment block.

Optimering av OTEC-system

Ocean Thermal Energy Conversion, OTEC, is a sustainable energy conversion technology that is not yet commercialized. OTEC is a technology that utilizes the temperature difference in oceans between the warm surface water and the cold water at 1 000 m depth to run a Rankine Cycle. This technology can produce electricity and provide synergies like fresh water, air conditioning and aquaculture. A simulation program for three alternative OTEC systems has been created in order to decide which OTEC system is most profitable; closed, open or hybrid system. In this simulation a production cost analysis is performed in order to investigate and decide which one of the three systems that has the lowest production cost. The production cost analysis also analyzes if the profitability is affected by the size of the facility. After these analyzes, the most profitable of the three different OTEC-systems is expanded by an installation of solar collectors in order to see if the thermal efficiency is improved. The result shows that the most profitable system varies with the size of the facility.

Deltid och kön: En undersökning av deltidsarbetets utveckling under åren 1987-2005

This paper aims at assessing the relationship between female and male part-time employment and the business cycle in Sweden during the years 1987?2005 using quarterly time-series data and two alternative indicators of the business cycle. It further aims at determining whether the share of women working part-time has changed over time. Key results include that the relationship between the business cycle and female part-time employment is found to be significant and countercyclical. No significant effect is however found for men.

Hjälpkraftsystem med två lågspänningsnivåer

Because of increasing demand of power on Malmbanan the capacity of the existing wires which supply the trains must be increased. This increases the stress on the existing poles and for this reason the system for supplying the loads along the railway is to be removed from the poles and be replaced by some other system. This thesis is a study on a two-level low voltage (1 kV and 0.4 kV) electrical system with the aim to investigate if it can be an alternative to the system used today taking into account the voltages, fault currents and costs.In this thesis the following tasks have been performed:? Gathering of data? Description of basic theory? Loadow and fault current calculations of the system with MATLAB? Life Cycle Cost estimate of the system? Analysis and conclusions from the resultsThe results show that the new system can be an alternative to replace today's system. The simulations and calculations show that the voltage drop is at an acceptable level and that the fault currents are large enough to supply a safe disconnection if a fault occurs at the far end of the system..

Kvinnors preventivmedelsanvändning under olika faser av det reproduktiva livet

Introduction: Studies have shown that women are not always satisfied with the effects of contraception and that contraceptive advice is perceived as non-specific. Aim: The purpose of this study was to investigate what contraceptive women have chosen to use in the different phases of their reproductive lives, and what they felt had influenced their choice. Method: A retrospective cross-sectional comparative study with a quantitative approach. A survey with fixed and multiple-choice options was sent to five hundred 45-year old women. Result: The study shows that various birth controls are different in the normal reproductive life.

Analys och beräkning av emissionsfaktorer för växthusgaser

An increased awareness about the global warming has created a demand for more information on how the climate is affected by different activities.This master thesis was initiated by Tricorona, a Swedish company that offers its customers analysis and calculation of their climate impact. Tricorona also supplies climate neutralisation with CERs, in accordance with the Kyoto protocol and controlled by the UN. This work demands updated emission factors for greenhouse gases. An emission factor gives information about the greenhouse gasintensity of a service or a product [kg CO2-eq./ functional unit].The purpose of this thesis is to examine how electricity, district heating, hotels, taxis, food and materials affect the climate and how emission factors for these areas can be calculated.This was done by reviewing and comparing different studies and by interviewing experts. The information was evaluated and recommendations on calculations and emission factors were made.The consumption of energy is the main source of greenhouse gas emissions for district heating, electricity, hotels, taxis and materials.

Energieffektiv torkning av kläder : en studie av torktumlare med varm- respektive kallvattenanslutning

Tumble dryers and drying cabinets have to a large extent replaced the traditional way of drying clothes outdoors. They are faster, more convenient, require less space and can be operated regardless of weather conditions. This replacement has significantly increased residential energy consumption, due to the fact that tumbles dryers consume large amounts of electrical energy. In the USA 9 % of the households electric energy is consumed when drying clothes. Over 4 million tumble dryers are sold in Europe each year and 20 % of the residential electricity consumption in Sweden is used drying and washing clothes.

Cykeltidsoptimering av sjuaxligt robotsystem

This master thesis studies how much the cycle time, i.e. the time it takes for an industrial robot to perform a given task, can be reduced if an extra degree of freedom (DOF) is added to the robot system. The extra DOF consists of a linear track, which is supposed to be used in an optimal way. The problem has been studied using simulations in the robot simulation tool RobotStudio. To be able to run an optimization in Matlab, with the RobotStudio simulation cycle time as the object function, communication between Matlab and RobotStudio has been set up with an interface written in Visual Basic.

Design av verklighetsanknuten matematikundervisning

The aim of this study was to design short interventions based on the literature study, which will change the pupils? posture on mathematics and connections between problem-solving in mathematics and everyday life. An experimental group of 17 pupils in fifth grade participated in the study and were educated in everyday mathematics 20 minutes a day during four weeks. The intervention was measured in a pre- and after questionnaire, in order to control the design and discover possible changes in the pupils? posture on mathematics and connections between problems and everyday life.

Energieffektivisering av industribelysning : Planering av belysningsanläggning i mekanisk verkstad

In Uppsala, Sweden, Vattenfall has a combined heat and power plant. On the premises there is an engineering workshop with old fluorescent and mercury lamps that need to be replaced. This provides a great opportunity to save energy and money by installing more efficient lighting. The main purpose of this study was to present two functional and energy efficient lighting systems including control system. The lighting systems were designed by investigating the working environment, measuring illuminance and by simulations in the software DIALux.

LCC-analys av FTX-system : En jämförelse av centralt- och lägenhetsplacerat

This report is the result of a thesis conducted at the consulting firm Bjerking AB andis the final part of the Bachelor Programme in Construction Engineering at Universityof Uppsala. The work aims to investigate the costs and how the choice of ventilationsystem affects building projects during a long-term period. This report covers costssuch as investment, maintenance and energy but also how they affect residents andbuilders. Building regulations for energy consumption are expected to be tougher;therefore a comparison of two different heat recovery ventilation systems(HRV-system) was made. One system is based on a centrally placed unit that coversthe whole buildings ventilation through vertical shafts.

<- Föregående sida 3 Nästa sida ->