The competitive nature of the automotive industry has always implied a necessity to improve product development concerning time-to-market, cost and product quality. As capacity of computer-aided engineering (CAE) tools has evolved, so has the strive for simulation-driven design. Virtual durability testing using full vehicle models is one of many challenges posed in front of vehicle manufacturers when computer simulations are given a key role in product development.This thesis has been initiated as a preliminary step towards implementing dynamic virtual durability testing in the development of buses and coaches at Scania. The objective has been to assess the predictability of a full vehicle coach model and to what level of precision structural loads can be predicted. Previously performed proving ground testing of a Scania Touring coach has been the basis for the modelling and simulations in this thesis.A virtual model of the Scania Touring coach has been created in multi-body simulation software package MSC.Adams.

Today's climate and environmental issues have now been up for discussion for quite long. Various environmental measures have been taken, but it is not always certain that those measures actually are for the better because of the complexity of our environment. Therefore, studies of whole life cycles are very important even if they are time and resource intensive.Real estate accounts for 15% of global carbon emissions, but also affects our environment in many other aspects. In Sweden this number is even higher. About 30 % of its carbon dioxide emissions originates from building sector and changes are therefore of great importance.

Syftet med studien är att beskriva hur svenska multinationella företag tillämpar cost plus metoden vid interna transaktioner över landsgränser. Vidare har följande forsningsfrågor formuleras: Hur tillämpar företag cost plus metoden? Vilka faktorer påverkar internprissättningsprocessen? Fallstudien är genomförd på Älvsbyhus som är en av nordens största tillverkare av prefabricerade sektionshus av trä med affärsidén att sälja och tillverka färdigmonterade, källarlösa trähus i 1 eller 1,5 plan till marknadens lägsta pris. Den utbredda handeln mellan företag i olika länder har resulterat i ett ökat antal multinationella koncerner bildats, därmed har ett behov av internpissättning för värdering av interna transaktionerna uppstått. Huvudtanken med internprissättningen är att internpriset ska avspegla marknadspriset för varan eller tjänsten, vilket ofta inte är möjligt då ett marknadspris inte existerar.

The control of indoor temperature must be able to handle large time constants and both measureable disturbances like outdoor temperature, and non-measurable disturbances, like waste heat from appliances. Due to cheaper microcontrollers (small computers with designated tasks) with better performance, more advanced and computation-demanding methods for control can be used.In this thesis, Generalized Predictive Control (GPC) has been implemented and tested on a theoretically derived model of a house. GPC states that a model of the system is estimated in every sample, and the control is carried out simultaneously, based on predictions of the model. Disturbances like solar radiation can be estimated and used in the control as well. The control signals are determined by quadratic programming, which makes it possible to consider conditions, for example limitations on the control signals.GPC requires a number of parameters to be defined, like model order and control signal penalty, but is relatively robust for variations in them.

Recent turmoil surrounding nuclear power as an energy source, especially since the accidentat Fukushima, has largely contributed to the debate of whether or not nuclear power should beused as an energy source. This study has examined the economic feasibility of replacingForsmark?s 3rd nuclear reactor with a bio fueled power plant, and find out how this could bedone.The power generation that has to be replaced is equal to 1170 MWe. To replace this, 6 largescaleCFB-boilers, each providing over 200 MWe, were necessary. In addition to this, eachboiler required their respective turbine sets, comprising one high-pressure-, and one lowpressureturbine with intermediate reheating capacities.Based on this, a rankine-cycle was modeled using the software EES, to be able to calculatethe total heat required in the power plant.

Due to the well-developed rhetoric and the relative easiness to estimate costs, cost considerations are usually more in-depth than revenue considerations when discussing strategies impact on profitability. To avoid dysfunctional companies and poorly judged strategy decisions it is necessary to develop the rhetoric of revenue considerations.By collecting data from 230 respondents in a quantitative study of two grocery stores in Mora, the study aimed to assess the relationship between choice of generic strategy and self-reported buying behavior, considering differing decision-making processes of customers.The results of the study indicate that a differentiation strategy performs better than a low-cost strategy in terms of buyer frequency, number of goods and cost of purchase. However, due to a poor data collection method, the results are weak, and should therefore be questioned. The study indicates that reliability considerations for behavioral measures should be treated in the same respect as psychological measures, and therefore illuminates the need for new methods and measures to be developed..

Aim: To describe nurses' experiences providing end of life care to patients. Method Descriptive literature study, 15 articles were included. The search was made in PubMed, CINAHL and by manual search. The articles were reviewed, analyzed and summarized. Results: For newly graduated nurses? experience in end of life care proved to be something new, developing, difficult to manage and frightening, but expected in the profession.

Bankruptcy is a problem for the society in form of high costs for including suppliers, customers, employees, investors, banks, insurance companies etc. The purpose of this study is to confirm or dismiss a bankruptcy prediction model that has been developed in a previous Swedish study, in order to predict bankruptcy with help of specific key figures. The model has only been tested in a larger perspective where the population consisted of all small firms in Sweden, in this study the model´s reliability is tested by that it instead been applied to a minor perspective, where the population only includes Stockholm. With a quantitative approach of 12 different key figures from a total of 60 Swedish smaller registered companies in Stockholm between the years 2005-2007, has been studied. The companies are divided into two groups, companies with good financial health and companies that have ended up in bankruptcy.The results shows that the model is applicable in a smaller population, but some of the key figures do not generate essential or any type of information about bankruptcy, but the majority of the key figures in the model did.

A frequently asked question in real estate marketing is at what time of the year it is optimal to invest or sell. The aim of the project was to answer this question and to generate a prediction model over real estate located in the centre of Stockholm that takes seasons into account. With acquired sales statistics in Stockholm between 2010 and 2013 it was possible to perform a linear least square regression, also known as Ordinary Least Square (OLS), with describing qualities and season of sale as parameters. Statistical problems such as Multicollinearity and Heteroskedasticity have been taken into account when deriving the model. The result was a highly accurate prediction model indicating the profitability of investing in real estate during the summer and selling during the autumn..

In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.

In recent years more and more people have been sick-listed due to stress and it has happened to more women than men. The purpose of this paper is to see if recoveringfrom stress related states of ill-health can be promoted through participation in a stress management course. Five women who were or had been sick-listed and had participated in the life management course were interviewed. The results show that the course was an important forum for expressing emotions. The participants were more positive about the future after than before they entered the course.

Liberal theorists typically argue that state action should not favor any particular conception of the good or meaningful life. On this view the defining characteristic of the liberal state is neutrality among rivaling ideas of the good. This thesis argues that state neutrality is impossible to maintain in practice. Two different versions of state neutrality; neutral justification and neutral aims, are used to analyze a wide range of political issues. It is concluded that far from being neutral, the liberal state favors individualistic and market oriented conceptions of the good life.

Forest enterprises have always searched for ways to improve efficiency. For the past few years there has been an emphasis on stock-keeping levels. Increased demand for fresh round timber and the need to decrease the amount of tied-up capital has made the forest industry reduce its inventory levels. This has brought on a higher demand on the timber supply from the forest management districts concerning both delivery in time and assortment output. As a result, the flow of timber has fluctuated a lot with serious consequence for the timber supply during 1994.

Nowadays the majority of the thinnings made in Swedish forests are done by machines, harvesters and forwarders. The most common model in thinning with a harvester is strip-road operated thinning and stand-operated thinning with one intermediate passage between the strip-roads. This study is a time study with some quality follow ups on a strip-road operated thinning model, a stand-operated thinning model with one intermediate passage between the strip-roads and a stand-operated thinning model with two intermediate passages between the strip-roads. The machines in the study were a small harvester (Forestline MPM C90) and a medium sized forwarder (Timberjack 1110). The study was made in Litsnäset outside the city of Östersund in Sweden and was made during the autumn 2007. In a lodgepole pine stand six study units (0,6 ha) were thinned with the three different models, two study units per model.

Background: Patients with leg ulcer suffers often of woundpain. Healthcare professionals will strive after having knowledge and understanding for how woundpain influences the patient's quality of life. Aim: The aim is to elucidate the patient's experiences of pain at venous leg ulcer and the effects on their daily life. Method: The procedure has been a systematic literature overview with a systematic search in different databases. The search resulted in nine scientific articles.