In today?s society a large focus is put on energy systems and how our energy systems are built up. In order to make sure that we in the future still can enjoy the living standards that we are used to today, Sweden and EU have made a number of decisions on making our energy system more energy efficient and consequently reduce the usage of energy resources. By 2020 the European Union should have reduced its energy consumption by 20 % compared to 1990?s level, and by 2050, 50%.

This thesis treats the subject of a complete steady state and dynamic model of the VSC-HVDC covering both the AC and DC system-side of the converter. The topology of the model is recreated after the scheduled transmission line in the south of Sweden, called SydVa?stla?nken. The topology covers both a simple two terminal connection as well as a multi-terminal one. This model is to be implemented in the power system simulation program ARISTO.

The purpose of this development project is to create a model for working with a high school project in Electrical and Energy Program. It should be conducted in a form like companies do according to the goals from The Swedish National Agency for Education. In order to fully perform this we use the concept of Young Entrepreneurship. The model is created according to the new conditions from The National Electrical Safety Board. There is now an exception saying that a student during education is released from the demand of employment that is the normal procedure where you are under supervision from a certified electrician. During the project there has been theoretical and practical examinations in order to clear out the advantages and disadvantages using this model, but also to examine whether it is useful in the future and to what extent it can be used. The result indicates that the model is useful and fulfills the goals from The Swedish National Agency for Education but that the model has its limitations and difficulties.

Biogas is a gaseous fuel, rich in methane, produced through a biological route in an anaerobic digester. A gas engine generates combined heat and power, which can be used at the farm to reduce energy cost. The process also generates a digestate, with better utilization of nutrient compared to cattle manure. The aim of this study is to analyze the profitability of a farm-scale biogas plant for combined heat and power (CHP) at Wapnö. Wapnö is an agriculture company located in the southern part of Sweden.

The purpose of this report is to compile and examine the cost of renovation of moisture-damaged bathrooms, to derive a target price. The target price can then be used by insurance companies to estimate the ultimate cost of future bathroom renovations.       The method is based on the compilation and comparison of the cost of repairs of previous water damage in bathrooms. The calculations compiled based on repair estimates for different insurance losses from one of the leading insurance companies in Sweden.       The result shows the average price per square meter of floor area for different sizes of bathrooms. The average price is the basis for the estimate of future renovation costs of bathrooms. The results further show that the bathroom finishes, area and the distance between the entrepreneur and the location of the renovation have great impact on the final repairing cost.

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

2013 a decision was made that all projects at the Swedish Transport Administration shoulduse BIM (Building Information Modeling) to some extent from 2015. BIM is an approachthat allows for streamlining of projects by the use of a 3D-model created in an early stage ofthe project. The 3D-model can carry information about the facility throughout its life cyclefrom planning to management. The use of a 3D-model can help the project to detect errors inearly stages of the project when it is easy and cheap to fix the error instead of finding theerror in the construction phase when it is costly and time consuming to fix it. 3D-models alsolead to improved communication both within the project groups and with the public.

Rift Valley Fever (RVF) is a disease caused by Rift Valley Fever virus (RVFV), which is an arbovirus. An arbovirus is a virus that is transmitted by an arthropod vector, in this case a mosquito. The virus is a member of the Phlebovirus genus in the family Bunyaviridae. It was first identified in the Rift Valley in Kenya in 1930. The disease is a zoonosis but mainly affects domestic ruminants inducing massive abortions and a high mortality among young animals.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

The idea of this thesis emerged from our common interest to explore the life cycle of Swedish tourist destinations. This study has historical features since we tried to identify crucial historical and current push and pull factors, which influenced destinations upturns and downturns. In order to achieve our primary goal and identify those factors, we made two case studies. We chose Åre and Mölle as our cases and these two areas will represent Swedish destinations, and their life cycles, as a whole. The destinations? developing processes and their nowadays profile are not the same as for two hundred years ago which was a reason and motivation that made us start exploring this specific subject.

This project is focusing on a future park that will surround Hyllie water tower in the outskirts of Malmö. The water tower will be located in the central part of the new building area Hyllievång. The park will function as a town park with a special focus on water. The water council of the municipality, Va-verket, has for the last 7 years built up and been in charge for a pedagogical programme in the water tower, were schoolchildren come to learn about the cycle of water and how we use water in our daily life. In the park they want to build a new part that gives experience of water, as a compliment to the information in the tower. What will that park look like, and what shall it be constructed of? How do you bring water to the surface in a park? How can landscape architecture work to enhance the presence of water and make people more interested in water issues? In the search to find the answers to all my questions I have meet with people, read books and visited different places.

Resultaten visar på att abnormal earnings model är en mertillförlitlig modell i förhållande till dividend growth model. Dettafrämst då abnormal earnings model grundar sig på mer tillgängliginformation samt att tillväxträntan i dividend growth model harkonstaterats vara orealistiskt hög. Analytikers prognoser tenderaratt vara optimistiska i början av undersökningsperioden 2000-2002. Perioden 2003-2007 präglas mer av pessimistiskavinstprognoser. Marknadens riskpremie fluktuerar mindre underperioden 2005-2007, vilket kan förklaras utav införandet av IFRSår 2005..

Having an ileostomy can affect the quality of life. Quality of life is defined by Siri Naess as being active, relating well to others, having self-esteem and having a basic mood of happiness. The nurse?s task is to focus on the stoma care and work in a holistic way. The aim of the study was to describe how adults with permanent ileostomy experience their quality of life.

The female dog has a unique reproductive endocrinology, with high levels of progesterone throughout the 70-day long luteal phase. In this project, markers of glucose metabolism were studied and compared from the aspects of breed group and time in oestral cycle. The parameters studied were: glucose, insulin, progesterone, fructosamine and the newly introduced analysis of HbA1c. Hba1c was also further evaluated and discussed as a diagnostic tool in canine medicine.No differences in terms of glucose markers were found between a group of purebreed dogs of various breeds compared to a group of dogs with high risk of dioestrus diabetes, namely the Norwegian and Swedish elkhounds.No differences were found between the two sample occasions, anoestrus and dioestrus, concluding that there is no need for relating test results to the time of the oestrous cycle in middle-aged intact female dogs.There were statistically significant higher values of all glucose markers in diabetic dogs than in non-diabetic dogs. When it came to HbA1c, however, there was a larger overlap between the two groups, compared to fructosamine.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area. The results show that use of locally installed renewable energy sources can reduce the total climate impact when life cycle perspective is applied.