The way we interact with computers will soon change dramatically. The input interfaces are becoming more and more intuitive and one of the latest technologies is a touch screen interface capable of dealing with multiple inputs simultaneously. The tools we use to communicate with the computer - such as the mouse and the keyboard, will slowly disappear and be replaced with tools more comfortable and more natural for the human being to use. The purpose of this project was to create a basic framework for future projects dealing with this interface, as well as creating some example programs. This report describes my work and my experiences with this new interface..

This Master?s Thesis aims to illustrate in what ways the two Swedish environmental assessment tools, the Environmental Load Profile and EcoEffect differ and if performed valuations gives different results and environmental goals.The built urban environment causes about half the environmental loading in Sweden. The society?s ambition towards sustainable development has resulted in demands reducing the environmental load. One way to accomplish this change is with the assistance of tools for environmental assessment of the built environment.

This report is a result of a diplomawork in construction engineering.The goal of this thesis is to highlighthow the work with planning andperformance management is done in theprojects at the Swedish buildingcontractor Skanska Väg & anläggning,region Stockholm/Mälardalen, districtMark Stockholm North, compared toSkanska?s policies.The comparison was made with focus onfive tools for productivity. The toolsare as follow: broken-down schedule,work sets, visual control, performancemanagement/progress monitoring and bestpractice.The study showed that the usage of thedifferent tools varied both within andbetween the different projects.Practically none of the projects whereusing the tools progress monitoring andbest practice, mostly due to fewoperations being applicable. The worksets are now mostly documented, but theyare rarely followed up. Performancemanagement is somewhat inconsequentialfor the moment, but during 2011 targetsheets will be introduced, withtemplates for setting up targets.Scheduling is one of the most importantworks regarding planning.

This report presents the results of a thesis in which the department PL Hus at Grontmij AB isstudied. The study has been done in order to locate problem areas in order to streamline andimprove the quality of working. The study was done by an engineering student from theDepartment of Industrial Management at KTH on behalf of Grontmij AB. The project extendedover a period of 20 weeks during spring 2011.In addition to the Department itself has two project managers in two different projects beenfollowed. The method used has been participant observation and was used to be able to comeclose to reality and thus find problem areas where there are opportunities for development.Validation was made through comments and opinions from workers at Grontmij AB, afterreading the reports analysis.Based on a system and holistic approach has parallels been drawn to the production systems suchas TPS (Toyota Production System) and lean production.

Due to a constantly increasing competitive pressure it is of great importance to constantly strive for improvements in order to gain competitive advantages. Lean Production is a concept that has been introduced with the aim to minimize waste and increase profitability. The purpose of this report is therefore to investigate how to perform effective planning according to the principles of Lean Production, in companys with customer exclusive products, through a case study at Sandvik Mining and Construction (SMC), and to investigate how SMC kan improve their planning of drifting rods at the production unit in Sandviken.The study started by creating a theoretical framework, to describe the subject planning and planning based on Lean Production. This frame work constituted the base for the case study which took place at Sandvik Mining and Construction, and also for the model and planning tool that has been introduced.The result of the study is partly a general model with factors that contribute to a more effective planning. These factors has beed identifed as SMED, which focuses on reducing set up times and in the end to facilitate the planning.

This thesis presents a comparative study of image registration at two picture collection libraries. The two registration systems are analyzed as to the theoretical principles behind them and their practical application, and related to theoretical tools for subject analysis and bibliographic standards. While a growing number of picture collections now digitize their material, generally accepted standards and methods for the registration of digital images are still lacking. Many different systems coexist, often developed in-house in response to ad hoc needs and based on traditional registration tools created for textual documents, resulting in internationally incompatible mixed-format systems. The two picture collections examined here, however, have opted for similar, standardized tools for registration and subject analysis, and while there are differences in their application and focus, they have both considered issues of cross-system compatibility.

Detta examensarbete har utförts i samarbete med ett företag som önskar vara anonymt i rapporten. Företaget har nyligen fått höjda produktionsmål då de fått ta över produktion från en fabrik som håller på att avvecklas. Då arbetskraften fortfarande är densamma har detta lett till att de anställda får jobba övertid. Studien har huvudsakligen fokuserats på en avdelning inom företaget men till viss del har studien också krävt att mindre delar av de två andra avdelningarna också studerades.Syftet med projektet var att se över hur arbetsprocessen kunde effektiviseras så att målen kan nås utan att personalen behöver jobba övertid. Som ramverk för projektet användes en version av Six Sigmas lösningsmetodik DMAIC, nämligen RDMAIC, där en Recognize-fas har lagts till i starten av arbetet.

Den här rapporten redovisar resultatet av en fallstudie på projektet Göingegården som genomförs iregi av Derome Mark & Bostad. Syftet med rapporten är att kartlägga arbetsprocessen och därefterbelysa var det finns felkällor och störst förbättringsmöjligheter, av vilken anledning samt vilkakonsekvenser som dessa får. Rapporten belyser och åskådliggör vilka åtgärder och lösningar som böranvändas och dessa åtgärder utvärderas ur ett LEAN perspektiv med fokus på tid och kostnad someffekter.För att kunna nå dit har en stor del av arbetet inriktats sig mot att förstå hur processen fungerar, hurarbetet ser ut på Derome samt synliggöra vilka avvikningar som finns och hur dessa utspelar sig i detlånga loppet. Arbetet med eftersökning och felsökning består av främst av möten, intervjuer ocheftersökningar om hur arbetet sker på andra företag i samma bransch.Dessa avvikelser analyserades och deras härkomst, varför de uppkommer, undersöktes och fokus lågpå att hitta förbättringspunkter som är återkommande och inte bara engångsproblem. Attgrundstenarna och visionerna som finns i LEAN är tätt sammanknutna med de åtgärdsförslag somredovisas i rapporten ser vi som en klar utgångspunkt.Resultatet av rapporten visar på att inom projekteringsdelen av projektet finns det brister och deflesta av dessa brister härleds komma från omodern teknik.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

Vårt moderna samhälle är idag beroende av dagliga transporter som både är en stor kostnad för producerande företag och dessutom har en stor miljöpåverkan. Främst eftersom klimatfrågan idag debatteras flitigt men också för att det finns stora incitament för företagen att minska sina transportkostnader kommer vi, med största sannolikhet att se stora effektiviseringar av denna bransch inom en snar framtid. I detta arbete behandlas därför i vilken utsträckning två välkända teorier, Lean och Supply Chain Management, kan användas för att optimera transporterna främst vad gäller kostnad och miljöpåverkan. Efter att ha analyserat ett flertal rapporter som behandlat dagens transporter, transporttyper av olika slag och pågående miljöregleringar samt intervjuer med två svenska industribolag har vi kommit fram till att dessa två teorier inte lämpar sig i alla situationer. Lönsamheten i användandet av dessa två teorier beror på vilken teknisk grad företagets produkter har samt hur stor företagens produktion är.

The disconnect between assumptions regarding computer users interactions made by software engineers and the actual interactions do, for various reasons, not always match. Gathering actual usage data from user interfaces can enable software designers to make better educated decisions. By buildning a prototype for collecting such data from a diagnosis tool for the automotive industry this project has shown not only how to benefit from the data but also how to perform the work. The data is 1 600 sessions consisting of 26 000 individual events. From this it has shown that available tools can assist in rudimentary questions regarding usage.

When working with market communications it is important that ones brand is noticed and remembered, for which the marketer has many tools at hand. This study compares the communicative effects of PR and paid advertisement on consumers, in response to the underlying purpose to provide a theoretical framework for better understanding the relative effects of the two tools. In the struggle for consumers? attention we find ads to be a tool to achieve wider brand knowledge, whilst PR is rewarded more extensive elaboration once noticed. The study also affirms the causal link between communication credibility, attitude toward the communication and brand attitude.

This study shows the thoughts, hopes and wishes of two male and two female music teachers, in grades 6 ? 9 from four different cities of Sweden. The emphasis lays on usage of digital tools. As the schools now stand before lots of changes in its curriculums; the use of digital tools was the main thing that caught my interest. How has the schools interpreted what this means? What does this mean in terms of purchases for the schools? We already know that many schools are lacking proper facilities to conduct music lessons so this ads on even larger needs.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

AB Gustaf Kährs grundades 1857 i Nybro och 1947 blev Kährs först med att få patent på ett trägolv. Enligt Kährs är deras affärsidé att erbjuda miljövänliga och högkvalitativa trägolv för privata, offentliga och kommersiella miljöer. Under de senare åren har marknaden för robustare och mer formgivna trägolv vuxit. Därför har Kährs på kort tid byggt upp en ny linje för designprodukter. Det finns ett behov av att utvärdera och analysera linjen ur ett produktionstekniskt perspektiv med hjälp av olika LEAN verktyg.