AbstractLean production has become one common concept within industries to make the work more effective and to meet today?s hard competition. A challenge for Chinese production is the threat from new low cost countries. It will become very difficult to succeed to produce to a lower cost than these countries; this led to that Chinese companies must develop new strategies, according to Lee and Zhou (2000). This will put China in front of new challenges and new strategies can be needed to retain their strong competitive advantages.

Denna kandidatuppsats baseras på en fallstudie om hur styrningsmodellen Lean har implementeras på OKQ8:s stationer. Studien ämnar vidare undersöka vilka faktorer som påverkar utfallet samt undersöka hur Lean har påverkat effektiviteten på stationerna. För att besvara detta har intervjuer genomförts med personal på OKQ8. Studien analyserar hur faktorer så som stress, arbetskraftsflexibilitet och delaktighet har påverkat utfallet av implementeringen. Vidare har även nyckeltal använts för att analysera om Lean har lett till att organisationen har blivit mer effektiv.

This study has investigated the possibilities of implementing lean in a division of a hospital in Stockholm. The goal was to reduce the lead time for the patient to get his diagnose by implementing lean in the two production flows of this division. In order to accomplish it, a complete map over the value stream has been done. With the help of the value stream map and lean theory a list over the processes in contradiction with lean has been made. Finally propositions to implement lean and by this way reduce the lead times in this stream have been made out.

Construction production always contains different disciplines whose priorities andinterests can be very diverse. Good communication and coordination are essential tominimize misunderstandings and achieve good quality in the end result. This makesplanning a central part of the production management. In a world where conditionscan change as often as daily, being well prepared increases the opportunities to stayflexible and decrease negative effects of the changes.This study has been done in association with Skanska Foundations district North inStockholm in order to investigate how visual planning can be used in the productionmanagement to optimize the coordination and the quality.The history of Lean started at Toyota, but the concept are now spread over theworld and are used wide outside of the car industry nowadays. What?s challengingabout Lean in foundation projects is to embrace a long-term perspective and invest insolutions that are profitable in the longer term, instead of solve problems by onlytreating the symptoms.A holistic perspective is crucial in order to truly understand Lean.

Problem: How is Lean, a production-focused model being applied to non-productive focused industries.Purpose: To examine how Lean has been applied to the department of Turbuhaler-Kvalitetskontroll and which parts have been successfully applied.Problem statement: How does the implementation of Lean?s basic concept, which originated in the car industry, differentiate itself from the implementation of Lean in the pharmaceutical industry, in this case the department of Turbuhaler-Kvalitetskontroll at AstraZeneca.Conclusions: The department has had success in its implementation of lean. They have developed and modified the basic concept in order to apply it and excluded the parts they did not consider necessary. Through their work they have accomplished numerous improvements in, among other things, the reduction of lead time. .

Detta arbete beskriver en elektrisk pulsgenerator, dess konstruktion och ingående komponenter.Särskild uppmärksamhet ägnas åt det triggade gnistgapet och triggpulsgeneratorn. Gnistgapetskonstruktion beskrivs. En SPICE-modell utvecklas för gnistgapets urladdningskanal.Urladdningskanalens egenskaper simuleras. Simulerad och fotograferad kanalradie jämförs.Några genomförda försök beskrivs kort, däribland det katastrofala och avslutande försöket. Detavslutande försöket analyseras.

This report is the result of a thesis work carried out on the Risifrutti production at the company Procordia Food AB. The thesis is at a master level and is the final work for the author to receive a Master of Science in Innovative production at Mälardalen University. The thesis comprises 30 credits and has lasted for 18 weeks. The thesis is mainly a research on whether it is possible to perform an Environmental Value Stream Map (E-VSM) in a food processing industry and an evaluation if the tools E-VSM and Green Performance Map (GPM) are useful in this type of industry. An extra part to this research is to use the results from the E-VSM and give Procordia Food AB information on improvement potentials in the Risifrutti production. The author has found it difficult to collect some of the quantitative data to the E-VSM, mainly regarding energy, but by using the Value Stream Mapping (VSM) tool and other Lean tools the author was able to identify and quantify several wastes in the Risifrutti production. Recommendations for improvements based on these wastes have been given to the company. In the research part of this report the utility of the Value Stream Map, Environmental Value Stream Map and Green Performance Map in a food processing industry have been analyzed. The author has found that the Value Stream Map has been a useful tool since waste and unevenness in the tact of the production has been identified. The Environmental Value Stream Map and the Green Performance Map are also great tools when a company wants to analyze their environmental impact and then invest in environmental improvements. However, no profound energy analyzes has been done in the Risifrutti production because of the lack of energy meters for steam, electricity and compressed air in the production lines..

The aim of this case study was to investigate the role of leadership and interpersonal relations among staff during implementation of lean at a University Hospital in Sweden. The 15 respondents were leaders and staff members from different wards and clinics, who had started working according to lean principles. One of the methods used was explorative, low structured interviews. Other methods used for gathering information about the case was attending lectures about lean healthcare at the hospital, part-taking in the lean game and reading articles about lean and the implementation in both daily press and on the intranet of the hospital. The results showed that an open and accessible leader that coaches his/her staff and supports their work, helps the staff to develop a lean identity.

This paper is about the new methods and metrics used in industry and business today striving for better revenues and larger market shares. It investigates the relations between the old fordistic and tayloristic way of manufacturing and compares it to the models used in industry today for being competitive, seeking to please customers and becoming more flexible. More specific the paper is about if Six Sigma and lean production are the key for succeeding these days. SKF:s factory in Gothenburg and other companies will make an example for how these methods are used in practice.The aim is to try to answer if these systems with inherited tools and methods are the right way to get the flexibility that is needed for being able to deliver the right goods to customers and market. For a company to be flexible decisions must be made fast and needed changes must be able to be done easy and without too large costs and investments.

This study is preformed at Westbaltic Components placed in Töcksfors Sweden. Themain target in this study is to make one of the company?s assembly lines better andmore effective. The assembly line constructs vending machines for different stores allover Europe.It will contain tobacco, snuff, cigarettes and shaving blades and many more similarproducts.The first step in our study is to locate the daily problems and find out a good way toreduce them and make them disappear. A good way to do this job easier was toconstruct a visualizing board.

Lean is a production philosophy which is about increased resource use while meeting customer requirements. The foundation of lean comes from Toyota and their production philosophy The Toyota Way. Professor Jeffrey k. Liker has worked with Toyota's production philosophy and Lean for a long time and has created a 4 P model and 14 principles that characterize the Toyota production system (TPS), which many sources refer to.The aim of my work is to study the working procedure of asphalt projects from sales to the laid asphalt with a focus on planning and production management. The goal is to examine how the lean philosophy can be applied in planning and production to simplify the flow of asphalt projects based on Likers model and principles.

During the middle of the 18th century the development of Toyota Production System, TPS, started in order to streamline the processes. TPS was based on the principles of assembly line production but unlike previous performers Toyota let the manufacturing be constantly affected by demand. At the end of the 18th century TPS was described by Womack and Jones in the book "The machine that changed the world - the story of lean producion" where TPS got the name lean. The principles behind lean is to maximize customer value and eliminate waste which means making products and services more valuable to the customer. 1Lean was for a long time a philosophy and an approach limited to industries and production based companies.

Part 1 of 2  ? Lean philosophy ? five steps to get the workplace in order?Part one deals with the theory of what Lean and 5S are.Lean is a long-term approach that involves a quest to become the best on the market by increasing employee engagement, eliminate waste and focus on the right things.5S is a method of order in a system. Businesses around the world are using these 5S which stands for sort, straighten, shine, standardize and sustain. Part 2 of 2 ? Lean philosophy ? five steps to get the workplace in order?Part 2 deals with the practical about 5S and a short summery about the company Wibax AB where the degree thesis took place.Wibax has a a project which involves using 5S in practice and create order in the in preparation lab and in the control room.By finding a solution to this mess reduces the time that was previously spent on searching equipment. Instead of search, the workers can do the real work..

Today, the management concept of lean has stretched far from its origins in the Japanese automobile industry. When reaching the Swedish restaurant industry, the conditions for a successful implementation of lean change as a result of the high employee turnover and the significant amount of part-time employees characteristic for the industry. Combined with a high-end service profile, these workforce characteristics seem inconsistent with some of the basic principles of lean. By conducting a case study, this thesis aims to investigate the effects of a variable workforce on the enablers for a successful implementation of lean in a high-end service industry. Using a theoretical framework consisting of enablers for an implementation of lean in services, the study finds that the variable workforce inhibits an implementation of lean by complicating the effects of traditional training, as well as the possibility of understanding the lean concept at all levels of the organization.

Swedish agricultural businesses are facing challenges in order to achieve long-term profitability. The opportunity to improve profitability and efficiency on farm level may be enhanced by management. One way to work with leadership is to use Lean. It is a management system that aims to improve competitiveness. Currently, there is a project where Lean is implemented into 100 agricultural firms.