This Master thesis has been carried out at Scania CV AB in Södertälje, in collaboration withKTH, The Royal Institute of Technology, Stockholm. The focus of this Master thesis isSetBased Concurrent Engineering(SBCE), with the purpose of answering the questions: what isSBCE, how does it work, and for what purposes is it applied.It was early established thatSBCE is often included as a part of Lean product development,which in its turn is often related to Toyota?s way of working. TheSBCE method includesworking with multiple solutions in parallel, eliminating weak alternatives throughout thewhole process. In opposite to a conventional product development process, where it iscommon one at an early stage tries to identify and choose the most promising alternative.Despite the appearance ofSBCE as a resource consuming method, figures from Toyotaindicates the opposite, thatSBCE is in fact a very effective way of working compared to othermore traditional methods.The process of this Master thesis was divided into three phases.

Lean har ökat i populäritet inom den offentliga sektorn men den forskning som finns om lean i detta sammanhang är fortfarande begränsad. Syftet med uppsatsen är att analysera hur lean tillämpas i svensk offentlig sektor och om lean är en meningsfull satsning försvenska kommuner. Detta görs genom en kvalitativ fallstudie där vi intervjuar medarbetare på två kommunala förvaltningar i Växjö kommun. Analysen jämför datan med 14 principer som leankonceptet bygger på och diskuterar speciella förutsättningarför lean i offentlig sektor. Leansatsningen ställs i relation till effekterna av lean hos verksamheterna.

Eco-design is all about improving products environmental performances throughout the products lifecycle by including the environmental aspect into the product development process. There are a large number of different tools that can be used for this, but there are several factors that can affect which one will be the best to use. Some tools for eco-design takes comprehensive studies and can only be performed by experts, while some tools can be used more time- and cost efficient and with basic knowledge. The choice of tool should be based on the company?s situation.This report describes the research of how the design and furniture company Blå Station could include a tool for eco-design in their product development process.

New innovation and technology have influenced the development of product development processes and the four largest banks in Sweden have more or less been forced to adapt their products and services along new customer requirements. It may therefore be considered appropriate to involve customers in this process. This by collecting customer information and allow customers to influence the process to a greater extent. The payment solutions of Sweden?s largest banks' continue to evolve and to pay with electronic money has come to change banks' product development processes of payment solutions.

Denna kandidatuppsats baseras på en fallstudie om hur styrningsmodellen Lean har implementeras på OKQ8:s stationer. Studien ämnar vidare undersöka vilka faktorer som påverkar utfallet samt undersöka hur Lean har påverkat effektiviteten på stationerna. För att besvara detta har intervjuer genomförts med personal på OKQ8. Studien analyserar hur faktorer så som stress, arbetskraftsflexibilitet och delaktighet har påverkat utfallet av implementeringen. Vidare har även nyckeltal använts för att analysera om Lean har lett till att organisationen har blivit mer effektiv.

This study has investigated the possibilities of implementing lean in a division of a hospital in Stockholm. The goal was to reduce the lead time for the patient to get his diagnose by implementing lean in the two production flows of this division. In order to accomplish it, a complete map over the value stream has been done. With the help of the value stream map and lean theory a list over the processes in contradiction with lean has been made. Finally propositions to implement lean and by this way reduce the lead times in this stream have been made out.

Problem: How is Lean, a production-focused model being applied to non-productive focused industries.Purpose: To examine how Lean has been applied to the department of Turbuhaler-Kvalitetskontroll and which parts have been successfully applied.Problem statement: How does the implementation of Lean?s basic concept, which originated in the car industry, differentiate itself from the implementation of Lean in the pharmaceutical industry, in this case the department of Turbuhaler-Kvalitetskontroll at AstraZeneca.Conclusions: The department has had success in its implementation of lean. They have developed and modified the basic concept in order to apply it and excluded the parts they did not consider necessary. Through their work they have accomplished numerous improvements in, among other things, the reduction of lead time. .

Detta arbete beskriver en elektrisk pulsgenerator, dess konstruktion och ingående komponenter.Särskild uppmärksamhet ägnas åt det triggade gnistgapet och triggpulsgeneratorn. Gnistgapetskonstruktion beskrivs. En SPICE-modell utvecklas för gnistgapets urladdningskanal.Urladdningskanalens egenskaper simuleras. Simulerad och fotograferad kanalradie jämförs.Några genomförda försök beskrivs kort, däribland det katastrofala och avslutande försöket. Detavslutande försöket analyseras.

The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

In relation to the development of IT-products it is very important that the software supplier is aware not only of the target group but also the field of application. Usability should characterize the whole IT-design process as, in relation to this context, design includes more than merely those aspects which are visible to and thus can be interpreted by the naked eye. The study examines the specific qualities and properties that substantiate the usability and the demands that a customer rightfully expects from an IT-product. The user and the customer are highlighted in the same context in order to demonstrate that it is through the customer that an IT-product is defined as being useful. Thus, from this perspective, the user and customer can be considered as being the same person.

Tourism has been an expanding market since the first travel agency started in the middle of the 18?Th century, and today it is a global industry, with intensified competition and high demands from the customers. Product development is therefore one of the most important aspects for successful companies, and scientists also agree that the first stages in product development are the most critical. This essay is focusing on those stages, regarding product development on travel agencies, and the research question is as follows: How are new tourism destinations developed and what is the difference in working process between small and big travel agencies? The empirical research consists of qualitative semi-structured interviews with two big and two small travel agencies.

This thesis presents an application that performs positioning of modules automatically based on given data for every module, and the development of it. The basis of the application is from a previous thesis code. On top of that code, more features and error handling has been added, as well as fixes for various bugs. A stress test has been performed and further development possibilities are being presented.The thesis work was carried out at Toyota Material Handling Mjölby (TMH) and was made in parallel with another thesis by Fredrik Holden who was generating data for the application. For a complete understanding of the theory and background, please also read Holden?s thesis report ?Development of method for automated positioning of 3D-representations of a modularized product?, as well as the former thesis  ?Analysis for Automated Positioning of 3D-representation of a Modularized product??..

Product development is a risky business; many products never yield profit, but it is also ne-cessary for a company?s survival in a competitive business where the costumers change their requests constantly. Consumer-led product development is developed from the wish to fill the consumer?s needs and expectations and thereby be more likely to succeed. Lindell?s Gårdsslakteri AB is a local slaughter and meat processor in Västergötland.

In the last decades, lean production has proven to be one of the most important organizational paradigms in manufacturing. The lean concept has also spread into the service industry where it is applied within a range of different areas. The wide applicability of lean principles has spurred the authors of this study to apply the principles in the context of the operations of a Swedish remand prison. The thesis examines the process a client of the remand prison Häktet Kronoberg goes through from the time of arrest until he/she is released or convicted and transferred to jail. Based on lean tools and principles, the thesis maps and analyses this process.

Part 1 of 2  ? Lean philosophy ? five steps to get the workplace in order?Part one deals with the theory of what Lean and 5S are.Lean is a long-term approach that involves a quest to become the best on the market by increasing employee engagement, eliminate waste and focus on the right things.5S is a method of order in a system. Businesses around the world are using these 5S which stands for sort, straighten, shine, standardize and sustain. Part 2 of 2 ? Lean philosophy ? five steps to get the workplace in order?Part 2 deals with the practical about 5S and a short summery about the company Wibax AB where the degree thesis took place.Wibax has a a project which involves using 5S in practice and create order in the in preparation lab and in the control room.By finding a solution to this mess reduces the time that was previously spent on searching equipment. Instead of search, the workers can do the real work..