Lean Product Development is a knowledge-based business concept in order to maintain high quality, meetcustomer requirements and to make product development more efficient. An important part of the processis to add a lot of resources at an early stage and execute the development as an iterative process betweendepartments exploring many alternatives thoroughly. The work focuses on how Lean ProductDevelopment is carried out and explores how to manage interaction between different departments andexpertise with regard to cross-functional collaboration and knowledge sharing i.e. learning.The information for the studies was gathered at a major Swedish company from two projects. The projectswere carried out as cross-functional and possible key factors for cross-functional collaboration wasidentified.The results have been correlated with theories of Lean, Product development, Lean product developmentand Learning.

If Sweden want to be able to compete internationally with its production capacity,it is important to work actively with production development and production ofresource-and time-efficient. This report is a bachelor thesis of 15 hp conducted atthe University of Halmstad. Using the principles of continuous improvement andLean Production, the author developed a concept for HAGS Aneby AB to changeto the customer order driven assembly of spring toys.First of all, the theories of Lean Production, logistics and ergonomics are used tobuild and present a theoretical framework for further examination. Then, toachieve the target, the current assembly process is analyzed to develop some firstconceptual ideas for improvement. In order to develop the best advice, theconcepts are evaluated against the company?s requirementsThe developed action plan gives recommendations on how the company shouldrestructure their assembly process and the organization of the related departmentin order to produce spring toys in a more time efficient and lean way.

Many companies are currently working to optimize and streamline their processes and production lines to achieve higher profitability. In increasingly competitive markets, companies are working to find solutions to increase the value of their production with such a small use of resources as possible. A tool used to accomplish this is the Lean management system. Lean comes from the production system that Toyota has been developing since the early 1900's, The Toyota Production System (TPS). The Lean philosophy helps companies, by working towards continuous improvement in its operations, to achieve higher customer satisfaction, more efficient production and ultimately higher profitability. Many companies are working to implement Lean in their organization. But there are many who fail to implement a complete change towards Lean.

The Production Manager at Atlas Copco AB Craelius wants to adopt a lean approach to become more competitive. This thesis is an exploratory study of the subject and what it means for the business activity and its implementation process.The objective is to provide a basic understanding of lean to the company, and what this means for Atlas Copco AB Craelius. The report describes the industrial revolution in brief. This is because the company itself must understand where certain ways of looking at production management is derived from. Furthermore, it provides an understanding of Lean's origins.

Efficiency has become an important objective for many providers of welfare services. Among Swedish schools, both private and public, increased administrative demands seemingly influence operations, and affect teachers negatively through perceived stress. Simultaneously, Swedish students scored an all-time low in the latest PISA survey, and are now performing below the OECD-average in science, mathematics and reading. A central administrative task in the Swedish elementary school is the parent-teacher conference, which is an important activity in supporting the development of the student's knowledge and social skills. Lean is a well-established operations framework, which has proven successful in order to improve process efficiency.

This graduation work is a result of implementing Lean Production using OEE and SMED at Enics Sweden AB in Malmö. Enics doesn?t have an established improvement concept and therefore should this work serve as an introduction to possibly start with Lean Production. A result in this report is that an OEE value has been identified within a common order at Enics. Other results are that an implementation of a Lean-board has been implemented and furthermore, within SMED, a flag that indicates changeover..

Lean har ökat i populäritet inom den offentliga sektorn men den forskning som finns om lean i detta sammanhang är fortfarande begränsad. Syftet med uppsatsen är att analysera hur lean tillämpas i svensk offentlig sektor och om lean är en meningsfull satsning försvenska kommuner. Detta görs genom en kvalitativ fallstudie där vi intervjuar medarbetare på två kommunala förvaltningar i Växjö kommun. Analysen jämför datan med 14 principer som leankonceptet bygger på och diskuterar speciella förutsättningarför lean i offentlig sektor. Leansatsningen ställs i relation till effekterna av lean hos verksamheterna.

AbstractLean production has become one common concept within industries to make the work more effective and to meet today?s hard competition. A challenge for Chinese production is the threat from new low cost countries. It will become very difficult to succeed to produce to a lower cost than these countries; this led to that Chinese companies must develop new strategies, according to Lee and Zhou (2000). This will put China in front of new challenges and new strategies can be needed to retain their strong competitive advantages.

Lean production is the name given to Toyota?s Production System (TPS) by the west. The continuous improvements of their operations through Lean has made Toyota into the largest car manufacturer in the world. This, in turn, has led to several studies regarding both Toyota and their system as to find ways to apply Lean in other organizations. Even so, over 90 percent of all companies fail to implement Lean.

Although Lean has received an increased amount of attention in the service context, research still has not established how successfully Lean manages to increase service productivity; since service productivity consists of both efficiency and quality. Research regarding productivity discusses the risk of a tradeoff between efficiency and quality in service production processes. Therefore, this thesis aims to explore if the tradeoff in a production setting with low variability in demand and low customer participation exists, after Lean has been implemented. With a qualitative approach, a case study has been conducted at Scandinavian Airlines Ground Handling to evaluate the effects of Lean in the baggage handling process. The result of the study shows that the tradeoff has not been overcome; efficiency has increased at the expense of quality.

Denna kandidatuppsats baseras på en fallstudie om hur styrningsmodellen Lean har implementeras på OKQ8:s stationer. Studien ämnar vidare undersöka vilka faktorer som påverkar utfallet samt undersöka hur Lean har påverkat effektiviteten på stationerna. För att besvara detta har intervjuer genomförts med personal på OKQ8. Studien analyserar hur faktorer så som stress, arbetskraftsflexibilitet och delaktighet har påverkat utfallet av implementeringen. Vidare har även nyckeltal använts för att analysera om Lean har lett till att organisationen har blivit mer effektiv.

This study has investigated the possibilities of implementing lean in a division of a hospital in Stockholm. The goal was to reduce the lead time for the patient to get his diagnose by implementing lean in the two production flows of this division. In order to accomplish it, a complete map over the value stream has been done. With the help of the value stream map and lean theory a list over the processes in contradiction with lean has been made. Finally propositions to implement lean and by this way reduce the lead times in this stream have been made out.

This thesis has been performed as a part of the Bachelor degree in Industrial Engineering and Management at the School of Engineering in Jönköping. The thesis is written on behalf of Pallco AB, which is an engineering company that performs subcontracting, surface treatment, and assembly of components, mainly in steel and aluminium. The thesis focuses on identifying and analyzing the customer order fulfillment process of three customers at Pallco AB.The main objective of the thesis is to distinguish time differences in the company?s administrative work for each of the three customers. Furthermore, Lean thinking is following as a thread through the whole thesis.

Problem: How is Lean, a production-focused model being applied to non-productive focused industries.Purpose: To examine how Lean has been applied to the department of Turbuhaler-Kvalitetskontroll and which parts have been successfully applied.Problem statement: How does the implementation of Lean?s basic concept, which originated in the car industry, differentiate itself from the implementation of Lean in the pharmaceutical industry, in this case the department of Turbuhaler-Kvalitetskontroll at AstraZeneca.Conclusions: The department has had success in its implementation of lean. They have developed and modified the basic concept in order to apply it and excluded the parts they did not consider necessary. Through their work they have accomplished numerous improvements in, among other things, the reduction of lead time. .

AbstractOur purpose for making this study is to study the implementation, the use of and the effects of Lean within our case objects.  We chose to make this thesis by case studies. The three themes mentioned above is also the main research questions that we aim to find an answer to by this study. We have chosen to do a cross section analysis where we conducted structured interviews to find answers to these questions. The theoretical reference frame consists partly of traditional theoreticians within Lean but also more recent research within the subject as well as theory specifically for Lean within the Health Care sector.The result of this study shows in all our case studies that the Management has been supporting the implementation, but that the implementation process proceeds faster if also the professionals are involved in the process.  To succeed with the implementation there is a great need for good reasons and strives that can benefit the professionals. By the use of Lean our case studies have evaluated its processes, with the main intentions being to reduce waste activities and to create flows with ?pull systems?.