This is a critical discourse analysis of the conformation of the conflict in Goma, Democratic Republic of the Congo, as constructed by Ekot, a news-show on Radio Sweden. The ambition of this bachelor thesis is to examine the production of a Congolese conflict for a Swedish audience and to find out how the construction differences with and without a reporter in the field. To obtain this purpose the narrative is studied as well as the use of voices that define the conflict. The construction of proximity between Swedish audience and the Congolese event and the meaning of sound to stabilize the formation of discourse within foreign news is examined as well. To conform and explain foreign news it must be put in relation to a starting point.

The aim of the study was to support the ongoing kaizen work at a medical centre. Two main topics have been addressed in this study:? Find a solution to ensure that the kaizen decisions are followed and will get a strong grip in the organisation.? Support the kaizen process by giving advice on how to structure the meetingsand how the kaizen work could be done more effectively.The study started with a visit to the medical centre to observe the kaizen process and the attitudes among the employees. The employees were asked to fill in a survey about the kaizen work at the centre. The final recommendations given have been based on this and also information gathered from other medical centres which work after the same kaizen principles.

Värdeskapande tid är något som skapar ett mervärde för kunden, något som förädlar produkten. Tyvärr är stora delar av ledtiden för en produkt icke värdeskapande. Det finns undersökningar som visar att den siffran kan vara så hög som 90 % av den totala tiden. Aktiviteter som inte bör ses som värdeskapande är interntransporter, lager och alla kostnader förknippade med det. De kostnaderna kan vara administration, godsmottagning, inkurans och själva kostnaden för lagerlokalen.

SammanfattningSegerström Automotive tillverkar plåtkomponenter till kunder som Scania, Stiga och Volvo. Företaget befinner sig i en expansiv fas, men konkurrensen på marknaden är hård och kraven på god kvalitet höga. Företaget är kvalitets- och miljöcertifierat. Som del i förbättrings- och kvalitetsarbetet har en nystart av verksamhetens produktionssystem, SAPS (Segerström Automotive Production System), skett. Ett av företagets mål för de närmsta åren är att minska antalet externa reklamationer.

The purpose of our study was to examine how missing children are portrayed in media. We wanted to see if there are any recurring story patterns and characters in the texts. We also wanted to examine how the relationship between children and adults are framed and which comprehensive view of children is mediated in journalistic texts.Our questions were: how do Swedish newspapers write about missing children? Which narrative pattern are there in the texts? How are children and adults represented in the texts? What relationship between children and adults are made visible in the texts? What a comprehensive approach to children is constructed in the texts?For this study, we used the media discourse, theories of representation, stereotypes and characters. And theories of narrative, dramatic turns and opposites.We chose to make three case studies in which children suddenly disappeared, the case of Bobby Äikiä, the case of Engla Höglund and the case of Sebastian Hedman.

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.

AbstractThe tests work is about the subject "synergism of steel and concrete."The construction sector is in a strong competition and the different companies in the PrefabMarket has ever tried to develop new design solutions that are efficient and environmentallyfriendly.The purpose of this report is to highlight different aspects of interaction and size up a columndimension and to examine its efficiency and load capacity as Eurocode 3 and Eurocode 4. A sizing chart that describes the relationship between the torque and normal force shouldalso be made of the interaction . .

Lean är en idé för kundanpassning och eliminering av slöseri. Idén har sin utgångspunkt i Toyota och tillverkningsindustrin men förekommer numera även inom serviceindustrin. Nyligen har Stockholmsregionen i svenska Skatteverket fått upp ögonen för Lean. Som referenspunkt använder de vid införandet av idén en organisation med, jämfört med Skatteverket, en annorlunda verksamhet nämligen det lastbilstillverkande företaget Scania. Med utgångspunkt i översättningsteorin framarbetad av bland andra Czarniawska har vi genomfört en studie på Skatteverket Stockholmsregion.

European Union has made a new decision that all new built houses by 2020 shallbe near-zero energy houses. Boverket?s definition of near-zero energy housesintends buildings with good energy performance in which a proportion of theamount of energy that must be added to the building is made of renewable energy.Passive House is a set of requirements from FEBY designed to build energyefficient buildings. This is achieved by reducing loss of heat through the buildingenvelope and to take advantage of the passive heat from solar radiation,installation and heat sources like people living in the house.This project has been made with help of Anebyhus and one of their model houseshave been examined from the report?s issues, including Anebyhus?s energyperformance, requirements for the manufacturing and assembly, how theenvelope must be improved to fulfill the requirements for the Passive House andwhat energy calculation programs are available on the market.The report aims to provide solutions for energy efficient houses that are adaptedfor production of house building.Two visits to Anebyhus has been done to study their manufacture and assemblyof building elements.

Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

Interior window shutters can be found in historical buildings, but they are an uncommon occurrence in modern buildings. In modern contemporary construction, large glass panels are often the ideal because of increased light inflow and for architectural purposes. However, this can generate several negative effects, such as increased energy loss, lack of privacy and high sunlight penetration. Problems that window shutters could have accommodated historically. This thesis identifies a lack of knowledge about interior window shutters in the Swedish building stock.

Certain types of waste, e.g. bottom ash originating from municipal solid waste incineration (MSWI bottom ash) can be used as road construction materials. A potential problem is the possibility of substances leaching out of the road and spreading in the surrounding groundwater.The aim of this master?s thesis is to conclude whether hydrogeological type settings can be employed to, based on local conditions, provide an estimate of the probable spreading of these substances in the surrounding groundwater, and whether certain types of soils can be identified as being less suitable for the localization of a MSWI bottom ash road. A hydrogeological type setting is defined as a mappable unit with similar hydrogeological properties.

The construction of an identity among lesbian women during 1950-­?1965 is in focus in this master ?s thesis. My starting point is that identity, such as lesbian or any other identity, is formed in relation to other people and groups, as well as society. This thesis will also examine how lesbian women met and formed bonds with like-­minded, and whether these aspects changed, during the defined time period. The empirics is made up by letters written by women to Riksfo?rbundet fo?r sexuellt likabera?ttigande (a Swedish organisation for lesbian and gays) as well as an interview with two lesbian women who were born in 1938 and 1940.

Byggsektorn står för en stor del av det totala avfallet i Sverige och står därmed inför stora miljöutmaningar. Däribland finns NCC Construction Sverige (nedan kallat NCC), Sveriges tredje största byggföretag med cirka 10 000 anställda. På varje bygg- eller anläggningsarbetsplats på NCC upprättas en miljöplan där olika krav omhändertas: lagkrav, lokala föreskrifter, beställarkrav samt interna krav.Studien genomfördes i samband med författarens praktik på NCC i Göteborg, avdelning Anläggning, med syftet att synliggöra yrkesarbetare, arbetsledare och platschefers syn på miljöarbetet på företaget - idag och historiskt. Totalt genomfördes 8 anonyma personintervjuer; två platschefer, två arbetsledare och fyra yrkesarbetare intervjuades under hösten 2014.Studien visade att ekonomiska incitament är viktiga för att miljöarbetet ska kännas berättigat för dem som utför det - framför allt för skeptikerna. Pappersbördan är hög och vissa anser att miljöarbetet enbart är en pappersprodukt utan egentlig mening.