Automatic milking systems (AMS) have been in commercial use since 1992 and have since 1998 increased a lot. The objective of this study has been to examine the development of udder health on farms converting to AMS. The study also included a comparison of how udder health developed depending on how farms handled cows with mastitis. This was because farms choose to either milk cows with mastitis in a separate barn or in the milking robot. Other studies on udder health on commercial farms have shown that somatic cell count increases both among individual cows and in the bulk milk when converting to an AMS. No differences between before and after converting to AMS in the proportion of cows treated for mastitis can be found in the literature.

The filters used today to purify water are often expensive and the need to find new filter materials is substantial. Studies of pine bark have shown that this is a material that may be used as an alternative to conventional filter materials, such as activated carbon. However, the study of pine bark has shown that a leakage of phenolic compounds may occur when using the material for water purification. Therefore, the purpose of this report is to investigate the release of phenols from pine bark, in order to evaluate the use of pine bark as a filter material. Another assignment is to investigate the amount of metals adsorbed by the filter material.

There is a great need to reduce nutrient leaching from arable land into lakes and oceans. By using several different types of models it has previously been possible to describe nutrient losses in a catchment area with a minimum unit of sub-catchment level. At present, it is instead desirable to model a smaller catchment with an opportunity to re-connect the results to the corresponding fields in the catchment. Such models already exist but they are not fully able to properly describe Swedish conditions and land characteristics in our region.With the approach of creating such a model, SLU has developed a project with this work as its first stage. The model is expected to be created under the working name SWE-model which stands for Soil Water Environment and is in this first stage supposed to apply the SOIL model in catchment scale. During the procedure to describe the first step in the process of developing such a model adapted to Swedish conditions and which works in the catchment scale with an area of about 10-30 km2, focus has been set on calculating the transport of water flow from different hydrological response units. Regardless of the processes occurring in the soil after the water has been added, it is assumed that all the water which flows from each simulated unit is drained.In the first step the hydrologic response units were identified based on land use and soil type in the study area. With the help of a script with functions that retrieve and transform data, certain units were chosen for simulation. The script was also created in this project. Finally, the model results were aggregated and summarized for each unique unit, for each sub-catchment, and also for the whole catchment.From the results it is possible to see similarities in the flow dynamics between modeled and measured data. The efficiency coefficient has been calculated to correspond to the mean of the measured values for the whole simulation period. With an automated calibration process the model should be able to perform better. The volume error gives an indication of overestimation from the model..

Idag är information en av de viktigaste resurser som en organisation kan ha. På grund av den stora mängden information som flödar inom organisationen har det blivit en allt svårare resurs att skydda. Informationsläckage av hemligstämplad information blir därmed ett vanligt problem och kan leda till förödande konsekvenser för organisationer.Informationsläckage kan hanteras samt påverka organisationer på olika sätt och i denna studie undersöker vi huruvida det finns någon skillnad på hur de organisationer vi intervjuat inom den offentliga samt privata sektorn hantera samt påverkas av informationsläckage. Undersökningen inkluderar även vad enskilda individer, som på något sätt är kopplade till informationssäkerheten, inom organisationerna anser är anledningen till att någon väljer att bryta mot informationssäkerheten och läcka information.  En kvalitativ studie har gjorts på sex olika organisationer i Ljungby kommun där vi alltså intervjuat 11 personer med någon anknytning till informationssäkerhet med inriktning mot sekretessavtal.Enligt resultatet framgår det att samtliga informanter är medvetna om problemet informationsläckage och till stor del eniga om hur organisationerna de arbetar på skulle påverkas vid ett informationsläckage samt hur detta skulle hanteras.

This thesis has been performed at Scania CV AB Technical Centre in Södertälje and its aim hasbeen to study the causes and effects of deformations in the interface between the rear axlehousing ADA1100 and the central gear house R780 during operation. Design changes that wouldincrease the sealing capability of the studied interface are also suggested. Finite element (FE)and CAD software have been the primary tools in this study.Finite element (FE) simulations are used in the industry to predict and develop engineeringdesigns. The main motive for FE simulations has traditionally been to identify weak spots in thedesign, regarding high tensions and large deformations.The FE model is an aggregation of submodels and interface models that represents the rear axlehousing, suspension, central gear, central gear housing, wheels, bolts and weldings, and theirinteractions. The submodels have different material properties and they are connected withcontact interface models.Boundary conditions are defined on the bushings in front of the rear axle and on the air bellowsbehind the rear axle.

The energy use in a workshop company has been examined in this work in order to find areas for energy efficiency improvement. The combined oil and electricity heating in the company were compared with other alternative heating systems including cooling of the premises in following combinations:Ground source heat pump for heating and coolingDistrict heating and absorption coolingDistrict heating and low temperate surface water coolingEnergy use, operation costs and carbon dioxide emissions were calculated for the current heating systems and the three alternatives including cooling. The ground source heat pump for heating and cooling decreases bought energy with 34 MWh annually compared to current heating only. The district heating and low temperate surface water cooling has the largest reduction of operation cost and carbon dioxide. The operation cost decreases with 42 kSEK and the carbon dioxide with 43 metric ton CO2 annually.

Today most ice rinks in Sweden use secondary refrigeration systems with a solution of calcium chloride and water as secondary refrigerant. Due to the large amount of energy such a system uses more efficient systems would be desired.An earlier study concluded in the possibilities of using carbon dioxide as secondary refrigerant with copper tubes as the loops in the ice rink. Since then 3 ice rink refrigeration systems has been built with carbon dioxide in copper tubes. Excluding the ones being direct involved in those projects there is still very little knowledge about how these system works. This study has been made primarily with the aim of adding to the knowledge concerning availability and cost and secondary to look at possibilities for improvement.A comparison between systems with carbon dioxide, calcium chloride respective ammonium solved in water has been made by using Decision Matrix.

Myxomatous mitral valve disease is a common disease in older dogs of small- to medium-size breeds. The mitral valve, and less commonly the tricuspid valve may be affected which causes them to leak blood from the ventricle to the atrium of the heart during systole. With increasing severity of mitral valve leakage the forward stroke volume ejected into the aorta decreases, which may lead to an increase in blood pressure in the pulmonary vein resulting in pulmonary edema. A decrease in cardiac output may lead to a decrease in blood pressure, but the body may respond in order to normalize the blood pressure. Franzén showed in 2007 that the systolic blood pressure was increased in dogs with severe mitral insufficiency.

Intangible feelings of sorrow and grief, caused by events like separation, death, loss and trauma, all leave some kind of traces in us and they play an important role in our development. The individualistic society here in Sweden has shaped us to keep our feelings inside and at bay; since our childhood we have learnt that showing emotions like tears, sorrow and sadness are signs of weakness and can make others and yourself feel uncomfortable. With the starting point from my own experience and understanding of how we can deal and handle grief, I take a closer look on how jewelry, objects and rituals can be of importance in a grieving process and our lack of visual outer display of grief in today?s society. Through Sara Ahmeds theory I found a new possible way of understanding emotions and how they shape us.

The project was initiated by Medipharm which produce microbial inoculants which used as additives to preserve forage. The main goal was to test three inoculants to produce maize silege. The following Medipharm produced inoculants were tested, Milab 393, Lactisil Wolecrop II, Lactisil 300 2. An untreated control was included in the study. The trial was done at Swedish university of Agriculture and Science in Alnarp, Sweden. Eurostar was the cultivar of the maize and was grown on 20, 5 hectares.

Most of the saw and pulp industries have stored wood nearby their production, the main reason is to have a continuous wood flow to the production. Wet storage of wood is of great importance to keep the wood quality. Without water sprinkling the risk of drying outand decomposition through biological activity increases significantly and will result in a negative effect on future production and quality. One drawback of wet storage of wood is the leaching of chemical substances into the surrounding recipient. The log yard run-off contains phosphorus, nitrogen, phenols and organic substances. These substances can cause problems for the surrounding environment. The main objective of this project is to gain an understanding of the wet storage used by the Swedish wood industry and estimate the environmental consequences that run-off water will have on the recipient.

The production of ferrochromium alloys at Vargön Alloys AB contributes to formation of unwanted ferrochromium dust, which contains toxic Cr(VI). The dust is since summer 2005 treated with an iron-sulphate solution to reduce Cr(VI) to the non-toxic Cr(III). A year later the treatment technique was improved and disposal occurs in cells on the landfill. The cells can be up to 300 m3 and the edges can be made out of fro example concrete. Tests are conducted on the treated dust when it is disposed.

This work has been done to develop a plan for a future dairy barn at theGästgivaregården and to show the space needed for cows and replacement heifers. Itwould also show the storage that will be needed. The design was largely based on resultsfrom studies on six different farms, but also the facts that are taken from research papersand articles in order to compare theory with practice. Because some farms only whereinterviewed by phone I have used a query form to obtain comparable resultes.The aim is to build a new barn with Automatic milking. I've drawn a milking stable for120 milking cow and replacement heifers with the capability to house up to 140 milkingcows if the farm would expand in the future.Calculations of feed amounts and space requirements have been made to see how manyhectares are needed to supply the cows and replacement heifers with feed and to knowabout what size of storage space is required.The investigations made in this writing are to answer questions about the AMS-unit`sposition and how to best maintain a good health status in the herd.

Detta examensarbete har genomförts med anledning av att Norrvatten har önskemål om att få en rapport om de material som används i deras vattenledningsnät med fokus på typiska skador kopplade till ett specifikt material eller tillverkningsmetod. Det har framkommit indikationer om att kunskapen om rörmaterial och dess egenskaper med tiden har försämrats då den äldre generationens projektörer efterlämnat en kunskapslucka efter sig.Syftet med rapporten är att ge en god överblick av materialen i Norrvattens ledningsnät. Det krävs kunskap om materialen för att analysera sambandet mellan läckningsstatistik och materialets egenskaper.Informationshalten varierar mellan de olika materialen. Detta beror framförallt på materialets uppbyggnad och svårighetshalten att redovisa en klar och rättvis bild över dem. Materialen och dess information är uppdelade i kapitel för att underlätta för läsaren att på ett enkelt sätt förstå sammanhangen.Ett annat viktigt kapitel i denna rapport är beskrivningen över de anläggningsmetoder som valdes att tas med, dels markförlagda ledningar men också två schaktfria metoder vilka är infodring och rörspräckning.

The aim of this thesis was to answer a number of questions about the environmental consequences of aircraft de-icing. A further aim was to suggest how the environmental consequences due to the release of de-icing fluids can be measured and reduced.The main impact of the aircraft de-icing on the environment is due to the large oxygen demand for the degradation of glycol based de-icing fluids which are released in the environment. The effect of the increase in oxygen demand depends on where the degradation occurs in the ecosystem. In a sensitive ecosystem, the large demand of oxygen could provide an anaerobic environment which would be harmful for many types of organisms.In order to reduce the negative effects of the applied de-icing fluid, there is some type of collection system at every regular airport in Sweden. The methods of collection can be divided into two general groups, hydrological isolation or vacuum sweeper trucks.