The main purpose in this degree thesis is to investigate changes in performance when introducing a newly produced Real-Time database in one of CC Systems products, the Diagnostic Runtime Engine, DRE. The thesis is a collaboration between CC Systems, creator of DRE, and Mimer AB, developer of the Real-Time database.The result reveals that the time spent on database access is considerably lesscompared to the originally used database. The research has lead to several additional requirements on the real-time database and these are presented as part of the result in this thesis. The additional features will help making the product more suitable for DRE and similar applications.Additional research is required to be able to recommend the use of this product or not. Primarily the performance in another operating system, Windows CE, but also the introduction of additional features should be investigated.

Åfors glasswork was a company which started in 1876 and closed in 2012 due to the bad economical situation in the company. After its closure, the glasswork left behind contaminated soil with different concentrations of heavy metals such as, arsenic from arsenic trioxide, a chemical used to remove bubbles during the melting of glass, and lead oxide, a chemical used in the production of crystal glass. Crystal glass?s production occurred under 1921-1971, but emissions of lead into the air from Åfors glasswork continued until 2011, because of the artist Bertil Valliens? artglas was made in Åfors glasswork from 1970?s and onwards.The aim of this study was to estimate how much lead (Pb) and arsenic (As) that were released by Åfors Glasswork into the atmosphere during the operational period of the glasswork in comparison with how much of lead and arsenic were purchased for the company. Added to the assistance of the data from National Archives the variations in the activities of Åfors glasswork could be shown.

Inventory management is a key part of a company?s logistics function and is of great importance to companies as it is a substantial cost. It is of high importance for a company to make sure that the warehouse is efficient as possible. In this thesis two factors that hurt a warehouse?s efficiency are introduced; inventory inaccuracies and lead-time variations.This thesis has been dedicated to analyze how inventory inaccuracies and lead-time variations arise and how to eliminate them.To be able to solve this question we have used a qualitative research method.

The purpose of this study is to examine whether there is any connection between working hours, desired working hours and the worker ?s health. The study also aims to investigate if there are any differences over time. Earlier studies have shown that individuals need a balance in their life between worked hours and free time. This balance seems to be important for employees if they want to lead and remain a healthy lifestyle.

The purpose of this scientific essay is to evaluate if a continuous glucose monitoring system is something that can benefit Swedish animal health care. The study investigates if it is medically possible to use continuous glucose monitoring systems on dogs with an apparatus attached to their bodies. Furthermore, I try to establish whether this is possible in practice and how it could be done. The keywords used were diabetes mellitus, insulin, continuous glucose monitoring, blood glucose monitoring, dog, pet owner and animal nursing care. Furthermore, I wanted to find out if this system could be an alternative to currently established methods to measure the patient?s blood glucose level.

X-rays are a potential risk for animal health care personnel. The present study will examine the risks for scattered radiation to the personnel, if no lead gloves are used when holding an animal during the x-ray examination. Furthermore, how the impact of the exposure values and body parts examined, affect the scattered dose to the hands of the holder. Also, the distance between the animal and the hand that holds it was evaluated to see the impact on scattered radiation exposure. Tested by a survey, to animal health care students, the frequency of the usage of lead gloves in Swedish animal hospitals was studied. According to the results from the analysis, animal health care personnel don't need to use lead gloves every time they hold an animal or a cassette during x-ray examinations.

The objective of this thesis is to map the resources and methods used at the department OPPC, at AstraZeneca, and derived from that give suggestions on possible solutions that will increase their productivity.Mapping of the product flow, as well as gathering of process data, has mainly been done using observations, but consultation with the process technicians has also played a great role. Further have theoretical methods been used, based on literature studies, within the areas of Lean production and statistics.The work has incrementally gone forward since the steps taken has been restricted by the irregularity of production which led to the need of creating a fictive production flow. This has affected the lead-time calculations in the way that they are meant to give an indication, rather than an absolute truth, on how different methods described shall be used.The current state analysis showed multiple areas of improvement when defining capacity as value adding time in relation to total throughput time. Using the "standard scenario" as a basis showed that the actual production flow only constituted 50% of the total project time. Further it showed that the workflow contained more non-value adding activities than value adding activities, which is a result of how the work is distributed within the department as well as in the different projects.

Demand has become increasingly difficult to forecast in today?s volatile markets. Being able to produce towards real demand is becoming vital for companies, since inventories of finished goods are expensive to maintain and because miscalculated products tie up capital that in the end is never repaid. More and more companies are using postponement strategies to delay the process of producing until real demand has become known. Tooling Support Halmstad is a company within the manufacturing industry, which has become aware of the benefits with postponement strategies for parts of their production.

The purpose of this study is to increase the understanding of activities, flows and waste in a company's production process. By performing a value stream analysis, non-value adding activities are identified in a production process and then the suggested improvements that can reduce Lead Times will be stated. The value-stream mapping identifies the flow of information and the flow of material in a production process and this provides the basis for the identification of non-value adding activities.We conducted the study at Lammhults Möbel AB in Lammhult Sweden, where the production flow of Spira-21 has been investigated. This to identify any non-value adding activities that affect the flow negative and consumes time and money in a non-value adding way.A reasonable approach for the project was taken by studying the methodologies and theories. We conducted interviews and site surveys at Lammhults Möbel AB where the flow of information and material in the production process were investigated.

Nowdays an efficient production is critical to achieve for companies competing on the market for steel cutting tools. One of such companies is Halmstad based Tooling Support Halmstad AB that manufactures threading-taps, threading-dies and parting off tools, towards a centralized warehouse in Schiedam, Holland. The large amount of different products, approximately 2500 is a big contributor to the problem along with a new order system that creates a demand of low setup times. Previously the company was forwarded orders through quarter based prognoses which enabled planning of the production over a longer time span. Currently the newer order system ZENIT is in use and the company thereby gets their orders weekly.

We were assigned to do this master thesis by Husqvarna AB who at the time for this thesis just had implemented a new material and production planning system called Replenishment system. Husqvarna AB wanted us to examine the effects of their new planning system to see if it was profitable or not. Husqvarna AB had for a time considered their delivery and supplier service to bee their biggest problem and they wanted to solve this problem by improving the communication with all involved actors in the logistic chain, which they hoped would result in a better mix of products in their warehouses. The aim of this report was therefor to analyze eventual effects for Husqvarna AB when changing from a traditional material- and production planing system to a more information intensive one. The result of this report showed effects on decreasing administrational routines and improved flexibility and lead-times.

The work describes the development of an adjustment algorithm that will replace today?s manual adjustment of Lead- and Lag-filters at ABB Robotics industrial robots. The adjustment is mainly for the filter parameters in the control system.Three different algorithms have been created to replace the manual adjustment. One of them is based on the criterion from the manual adjustment and another one on optimization of the sensitivity function. The last one is a combination of the two.The report describe the development of the algorithms and how they behave during simulations and tests on real robots.

A new curriculum, entailing news for teachers as well as students, was implemented in 2011. Among other things History has been given a more prominent position in that every student will now study the subject. Can this decision lead to history being used more in the future?The aim of this thesis is to study the new curriculum, Gy11, as well the Lpf94 and Lgy70, based on Klas-Göran Karlsson´s typology where the use of history is divided into seven different categories. I will analyze the curricula, looking at what different uses of history that can be discerned as well as what changes have been made over time.

A new curriculum, entailing news for teachers as well as students, was implemented in 2011. Among other things History has been given a more prominent position in that every student will now study the subject. Can this decision lead to history being used more in the future?The aim of this thesis is to study the new curriculum, Gy11, as well the Lpf94 and Lgy70, based on Klas-Göran Karlsson´s typology where the use of history is divided into seven different categories. I will analyze the curricula, looking at what different uses of history that can be discerned as well as what changes have been made over time.

In this essay, I intent to examine history as a school subject in Swedish compulsory school (for children aged 7-16), it contains mostly an analysis of the syllabus for history in the three latest curriculums Lgr 69, Lgr 80 and Lpo 94. The main purpose of the essay is to illuminate the development and the change history as a subject has gone through during this specific time, and my will is also to illustrate the view on knowledge and learning that is revealed in the syllabus for history in today?s curriculum (Lpo 94).The survey shows that in Swedish compulsory school, history as a subject has changed significantly. During the examined years, the contents have been exceptionally broadened and that has lead to increasing demands on the students as it has gone from being directed to the individual and its contiguous history with shorter outlooks on the rest of the world, to requiring the individual to be able to see and understand other parts of the world and different time, on the basis of it?s own history and culture.