Organic Light Emitting Displays (OLEDs) are a new type of thin emissive displays predicted to possess superior properties to existing techniques e.g. Liquid Crystal Display (LCD). The main advantages are low power consumption and a thin display structure. This report contains an explanation of the emissive OLED technology, its functionality and the physics of the organic layer structure in an OLED. The technology is described with respect to the two classes of organic materials used in displays, small molecules and conjugated polymers.

Amongst the published literature researching wet cleaning of paper there is a limited amount of studies conducted researching the method simmering water treatment. There are even less studies conducted on how simmering water affects the paper being treated when used as a cleaning method. Despite the limited research, there are literary reviews describing the method and suggesting it as an alternative for conservation of paper with iron-gall ink. The following study will therefore be examining, the somewhat unusual method, simmering water treatment, and comparing it to one of the more common wet cleaning methods: immersion washing. This is done to compare how the different temperatures of the water affect the paper. The types of paper used in this study consists of three dyed and four undyed papers. All of the papers are new, apart from one sample originating from 1847.

In this thesis a concept for floor hatches for foam pits has been developed. Since there is an existing solution that is powered by hydraulics and is expensive, the goal was to develop a cheaper solution, as simple as possible.A number of different concepts were developed and evaluated. A concept with five sections that are pulled to the side and stacked on each other was chosen as it was thought to have the lowest risk of crush injuries and to be easiest to manage and control. In the opening behind the foam mattress a lifting table is placed to regulate the height of the stacked sections.To be allowed to be installed in the floor of sports halls the sections must be dimensioned according to the construction standards for these types of buildings. Different dimensions of beams in steel and wood materials were evaluated and of those, who lived up to the requirements of the standard, a concept was chosen.

This thesis investigates how Ericsson AB should do to achieve fast and secure handover when roaming in a WLAN. It also provides a security analysis of the system that the wireless access point is part of. The reason for this is that Ericsson is selling an access point called the ABS 2200 aimed at the public hotspot market. The premise was that they wanted a standardized way of handling the roaming issue. At the outset the 802.11F standard looked like a good alternative (in fact the only standardized alternative).

When the Iron spirals investigated in this paper saw the light again no one looked at them as nothing more than decoration. It was first during the 2011 excavation in Old Uppsala that the symbolism of the items no longer could be ignored. The spirals of Old Uppsala lay along the walls of the great hall, which stood upon one of the human constructed plateaus in the area. The hall had been burned down and then cleared of all lumber. Then the iron spirals had been placed in the positions and then everything was sealed with a layer of clay.A study of the artifact began with the purpose to contextualize and interpret the iron spiral.

This report describes the design and implementation of a multi-master, packet based protocol for small and tiny microcontrollers where resources are limited. The protocol was named "Tiny Controller Network" or TCN for short. The protocol is meant mainly as a control bus for automation and sensor acquisition applications but due to its flexibility can also be used for other purposes as well. It borrows some of its functionality and design ideas from the well known CAN bus and Modbus but also has a number of major differences like the use of standard hardware and time synchronisation. One of the key aspects during the design was the use of very little system resources and common on-chip hardware peripherals like a UART.

This report is focusing upon relining from a client?s point of view. Potential buyers are given a presentation of the different methods available today together with a general briefing describing the process. An important part of this report are the interviews that took place with already established customers. Property owners, managers, pipe cleaners, and project managers whom all been in contact with relining have answered the questions given along with their own thoughts and have also given recommendations of other persons to talk to.

Long time-series of pressure measurements often have high quality because the early instrumentsare more or less the same as the modern ones. A time-series from Lund consisting of three dailymeasurements from 1780-1997 has been homogenised and is therefore suitable for analysingpossible influences of the enhanced greenhouse effect. According to a two-layer model of theatmosphere one finds a shift in the frequency of baroclinic instability due to an increasedtemperature gradient caused by the increasing CO2. Baroclinic instability over the Atlantic Oceanis the main cause for frontal zone production, causing cyclonic activity over the southern part ofScandinavia. Changes to the baroclinic instability would therefore be traceable in the time seriesfrom Lund.

The purpose of this thesis work is to evaluate how the physical behaviour of a pipe bend is affected by the pipe bending procedure. Effects such as initial ovalization, thinning, thickening and plastic hardening from the bending procedure are examined and the mechanical properties of pipe bends containing these effects are investigated.This has been evaluated by creating a detailed Finite Element model of a pipe that is being bent. Then the differences compared to a bent tube in a virgin state, so called Elbow elements and an analytical in-house program have been evaluated. The virgin state refers to a model of a pipe that is bent from the beginning, thus having a homogeneous thickness and not containing any plastic hardening. The Elbow element is a calculationally cheap element, specially developed for accurate calculations of pipe bends in an initially virgin state.The goal with the thesis work is to get a better picture of what happens to a pipe as it is being bent, how this affects the mechanical properties and to evaluate the possibility to develop an easy method for taking these effects into account when using the Elbow element.This report describes the layout of the work and how the detailed FE-model has been constructed.

Yeast and Clostridia is a problem in silage for farmers as contaminated silage may result in poor animal health and milk quality. Clostridia can produce toxins that, when consumed, acts as neurotoxins, it may also cause blown cheeses if the Clostridia contaminates milk. The purpose of this study was to investigate the cause, effect and interaction of yeasts and Clostridia in silage. Clostridia are microorganisms which are strictly anaerobic and consume carbohydrates and protein in the silage. Yeast is a fungus that is facultative aerobic and feed on carbohydrates in the silage.

Today's urban centers become denser, which contributes to higher demands on sound and noise. It is therefore highly relevant to build homes with good sound environment while maintaining living space. This thesis aimed to reduce the current concrete walls and see how the mass law affects the reduction index value and flanking transmissions. Handmade calculations were calculated according to the Swedish standard SS-EN 21354-1, where only air sound was calculated.Calculations we­­­re performed on wall elements with different weights and thicknesses, and compared with results from Bastian.In Bastian calculations of flanking transmissions were also made, this was made to see the impact of the flanking transmission when changing the mass per unit area. Mass law's impact was examined by flanking transmission and the result shows that they are not affected as long as the ratio between the thickness and the density remains the same.A questionnaire survey was conducted to determine the actual sound experience; this questionnaire was conducted on three concrete buildings in Växjö.

The project aimed to develop a protective and stabilizing insole called Trailplate for soft andlight shoes. The demand came primarily from off-road runners in France, Switzerland, andAustria. The project was carried out at Icebug, a company that develops shoes mainly forrough terrain. The main focus has been on the trailplate which is designed to fit severaldifferent shoes.Torsional stiffness and bending resistance were the main objectives. To improve the existinginsole, a material with the right features was required.

This master thesis is a part of the DySCAS project at ENEA. The purpose of this thesisproject is to add support for streaming media and USB support to the DySCAS demonstratorplatform.To achieve this, some of the widely used middlewares available today were studied. The onethat proved to be of most interest is CORBA. Although CORBA?s solution to streamingmedia couldn?t be used due to their use of object programming, the CORBA solution didprovide some interesting thoughts regarding how the USB devices should be handled, in thiscase their ?resource inspector? and ?trading service?.Ethernet was the chosen network to support streaming media.

Sitka spruce (Picea sitchensis) is not considered to be a native species to Swedish forests. It´s origin is the pacific coast of Northern America, an area that is dominated by a coastal climate which makes it likely to believe that it would be well suited for growing in the south-west of Sweden. This study aims to investigate the gain in production that can be reached by growing sitka spruce instead of Norway spruce (Picea abies) in the county of Halland. A regression model based on data from forest experiments was produced to explain the gain in production. This model was based on elevation and annual precipitation. The model was then used to create a map layer in arcGIS that shows the gain of volume in comparison to Norway spruce in percent. An analysis was carried out to find what share of the forestland in Halland county that fell into four different classes of production gain.

This report describes the design and implementation of a multi-master, packet based protocol for small and tiny microcontrollers where resources are limited. The protocol was named "Tiny Controller Network" or TCN for short. The protocol is meant mainly as a control bus for automation and sensor acquisition applications but due to its flexibility can also be used for other purposes as well. It borrows some of its functionality and design ideas from the well known CAN bus and Modbus but also has a number of major differences like the use of standard hardware and time synchronisation. One of the key aspects during the design was the use of very little system resources and common on-chip hardware peripherals like a UART.