Dokumentet är ett resultat av studier gjorda under kursen Kandidatarbete I Datavetenskap. Arbetet utforskade, genom fallstudie, två egenskaper av distribuerade informationssystem och relation mellan dessa: säkerhet och prestanda. Målet med fallstudien har varit att belysa nackdelen med användning av Secure Socker Layer (SSL) dvs. dess effekt på hastigheten och fördelen med SSL, dvs. SSL:s roll i informationssäkerhetsarbetet. Arbetet visar hur prestanda i ett tillämpad distribuerat informationssystem kan påverkas av en SSL tillämpning.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Plagionotus detritus is a threatend longhorn beetle that only exists at one site in Sweden. It is saproxylic and depending on recently dead coarse oak wood for its larval development. Trees at Djurgården, Stockholm that have been colonized by Plagionotus detritus has been studied to find out the habitat preferences of the species and to see what affects the density of beetles in a tree. The bark of some trees and wood from the breeding project at Nordens Ark has also been studied to find out what affects the species reproductive success. The reproductive success was measured in two ways, the larval mortality and the size of the hatching holes.

The level of cadmium (Cd) in Swedish arable land has increased during the last century and the average concentration of Cd in the plough layer is today 0.23 mg/kg. The increase is mainly due to anthropogenic activities such as phosphorus fertilizing, liming, import of feed, and atmospheric deposition from industrial emissions. Cadmium in the soil will be taken up by crops and is thereby transferred to humans via food. Carrot is one of the crops of concern, both because it may contain quite high Cd concentrations and due to the large consumption in Sweden. In the body, Cd is stored mainly in the liver and the kidneys and may cause several diseases already at low concentrations.

Lichens are adapted to bright and sparse forests on oligotrophic ground. Due to a slow growth rate and high light demand lichens will suffer from competition in eutrophic environments. Therefore, lichens have disappeared from managed forests where the forest industry has increased the productivity. A reduced abundance of lichens will affect both biodiversity of the forest and the reindeer winter graze lands. It is important to understand how and for how long fertilization affects the abundance and diversity of lichens in order to protect lichen rich ecosystems. We have registered the biomass and number of lichen species in eight plots (four nitrogen rich and four nitrogen deficient) and compared fertilized Sami settlements with their oligotrophic surroundings in the nature reserves of Tjeggelvas.

Comfort analyses regarding human induced vibrationsIt is not too common among civil engineers in Sweden to perform comfort analyses considering the vibrations caused by human activities. In addition, the Swedish standards lack requirements to be used for comfort analyses in design of floor-systems. The demand for large spans in combination with slender slabs, is today a reason to investigate the floor-system constructions, in order to prevent disturbing vibrations and oscillations.The purpose of this thesis is to create a guide for how a comfort analysis, considering vibrations, should be implemented. Göran Svedenbjörk who is an expert in structural dynamics has been interviewed where he presents his latest project Värtaterminalen and answers some questions about vibrations due to human activities.Floor-systems, consisting of concrete slabs supported by steel or concrete beams, have been investigated with simulations in the finite element program Abaqus. In the simulations, the influence of various factors on the natural frequency of floor-systems and the acceleration level caused by dynamic loads, is studied.

Bacillus anthracis is the causative agent of anthrax, a serious and globally distributed zoonosis affecting a wide range of wild and domestic animals, invariably also humans. However, although known to humans since biblical times, much remains to be elucidated concerning the ecology and transmission of this bacterium. Of particular interest is the Bacillus anthracis spore, the uptake of which is the predominant way to contract anthrax and which is legendary for its resilience in the environment and thus crucial for persistence and spread of the disease. Hence, the aim of this study is to review the natural transmission of Bacillus anthracis and investigate potential means by which soil persisting Bacillus anthracis spores reach concentrations sufficient to infect susceptible hosts. When reviewing the literature, three different theories can be distinguished. Firstly, ?the incubator area? hypothesis suggests that favourable soil factors, possibly in association with amoebas, may constitute an environment supporting repeated spore-bacterium-spore cycling, thus increasing the local amount of spores.

The objectives of this experimental study were to investigate if a strategic method to supply loose housed sows with large quantities of straw 2 days before expected farrowing and if the sow?s body condition had any effect on the occurrence of shoulder lesions 5 weeks after farrowing. Data came from a study conducted on four commercial piglet-producing farms in southwest Sweden between March and December 2009. At each farm one batch of sows was followed during two consecutive lactations. The sows were randomly assigned to two different treatment groups and the sows that remained in the batch during the second lactation switched treatment group.

Hemp has been used for textiles for a long time in history until it became illegal to grow in many countries in the 1930s. It is interesting from an environmental point of view because it doesn?t need any pesticides and in most locations it doesn?t need any irrigation either, compared to cotton, which normally requires big amounts of both pesticides and water for irrigation. Hemp is a bast fiber, which means that the fibers are located on the bast of the stem (on the outer layer of the stem). Therefore they cannot be spun directly, they have to be removed from the stem first.

3D-modelling in AutoCAD This thesis is done in cooperation with LB-Hus in Bromölla, and have aimed to establish a digital AutoCAD model of one of the company?s house types and to find out what opportunities there are to do visualisations in the form of images directly from the programme. Modeling has been carried out so that the very construction of the house is included. Interiors and installations, with the exception of the ventilation system, have been left out in the model. The model has been created with solid models after a comparative study made between solid models and surface models to find out which option in this case was the easiest to handle and took up the least space.

The most common form of hair loss in young and old people is androgenic alopecia. Hereditary hair loss affects both men and women. Hereditary hair loss in some women begins at the age of 30, but as a rule hair loss begins in post-menopausal women. In women the hair thins out in an oval portion of the front part of the scalp. In men, hair loss can start as early as at the age of 20.

AbstractIn November 2011 the Swedish Government announced that they were conducting an investigation to examine what impact the conversion of existing rental stock to condominiums could have on the development of the Million programme areas. The proposal of converting rental stocks to condominiums aims to help people living in these neighbourhoods to private ownership, while still allowing people who want to continue to rent their homes to do that. This thesis intends to investigate the effects of the proposed reform from a management perspective. The maintenance of the areas built during the Million Programme gets more neglected every year that passes. The majority of the housing stock is rental properties and extensive renovation of the surface layer, tribes and public spaces are essential in all Million programme areas studied. By transforming a portion of the housing stock into condominiums and by improve the living environment through renovations, these areas would be able to gets more attractive.

This degree project illustrates newsprint and waterless offset. A new news press was introduced at Drupa-00, Cortina from KBA, which is the first news press dedicated the waterless technique. With actual statistics from the company in question an investigation was made whether their production fits this press. It came out in the investigation that the production of the company, from statistics, fits this press very good. A table was made where different timeschedules were accounted for the new press, with semi- and full automatic plate changing for present and to be added papers.

Över 90 % av betäckningarna inom Avelsföreningen för svenska varmblodiga hästen (ASVH) skedde med artificiell insemination (AI) år 2011. AI har många fördelar i avelsarbetet då hingsten inte behöver vara på plats när stoet brunstar, möjligheten att välja bland både nationella och internationella hingstar ger en stor valmöjlighet för stoägaren. I Sverige samlas sperma från hingstarna normalt sett tre gånger i veckan genom upphopp på en fantomhäst där ejakulatet samlas i en artificiell vagina. Trots mycket forskning är det fortfarande ca 20 % av hingstarna som lämnar spermier som inte lämpar sig för frysning. Innan nedkylning centrifugeras seminalplasman bort eller späds ut för att reducera inverkan på spermierna. Seminalplasman har positiv inverkan på spermierna vid naturlig betäckning men kan ha negativ inverkan på spermierna under lagring.

Increased understanding of the mechanisms that operate in conjunction with the welding of metal surfaces may help to improve existing manufacturing processes, and to enable new products and combinations of materials. The purpose of the project has therefore been to acquire a deeper understanding of what is happening in the bond for steel and for the factors that form the basis for a bond to develop between metals in the production of laminates by pressing. The merge has been done by pressing and the surfaces after the experiments have been studied in detail in the scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and with interferenceprofilometry in Wyko, to provide a greater understanding of the mechanisms that influence the bonding in the interface between metals. The project was limited to contain the materials Docol 1000, HyTens 1200, Aluminum AA3003 and a commercial steel. The parameters varied in the experiments to study their influence closer are temperature, pressure, heat treatment and pretreatment. This has been implemented by pressing with varying temperature and pressure.