Today, many veterinary hospitals offer rehabilitation as a service. We think that this is an interesting subject and therefore we want to find out what rehabilitation methods that are available in Sweden for dogs and horses. We want to give animal nurses and other persons who have animals as an occupation an survey that shortly describes how the methods are performed, what physical effect they have in the body and to give examples in what conditions they are used. To find out what rehabilitation methods that are available we sent out two different questionnaires, one to hospitals/clinics for small animals and one to hospitals/clinics for horses and other companies that works with rehabilitation of horses. The information about the methods described in our project we have found in literature and on the Internet.

The aim of this study was to map and date glacial flutings with ice flows deviating from the predominating northwesterly ice flow direction in the southern part of Norrbotten County in northern Sweden, and also to investigate if parts of the glacial landscape are older than previously thought. The traditional view is that most landforms in the area were formed during the late Weichselian (W3). Analysis of the new high resolution elevation model (2 m grid) derived from laser scanning was performed after treating the data with a hillshade tool in ArcMap to reveal terrain features such as flutings. The analysis resulted in a map showing four main groups of deviating ice flows (N-S, NO-SV, SO-NV and S-N) and several westerly ice flows. The majority of flutings with deviating ice flows were found in low terrain.

Syfte: Studiens syfte är att göra en kort redovisning av de vanligaste tekniker (LASIK, LASEK, PRK och RLE) som finns inom refraktiv kirurgi med en fördjupning inom LASIK (laser in situ keratomileusis). Studiens syfte är att ta reda på hur LASIK operationen går till, vilka som är lämpade kandidater och vilka de vanligaste riskerna som finns.Bakgrund: Keratorefraktiv kirurgi har utvecklats enormt under de senaste årtionden. De initiala försöken att korrigera sfärocylindriska refraktiva fel med corneal kirurgi och första generationen excimer laser kirurgi var effektiva för korrigering av lägre refraktiva fel. Utvecklingen av mer komplex laserteknologi har gett mer noggranna och förutsägbara resultat. Detta har gjort att indikationer för den refraktiva kirurgin har expanderat.

In time with HolmenSkog district Egenskog Norrköping´s decreasing mountain of cleaning, the office started to look around for new alternative cleaning strategies to lower the costs connected with cleaning. One option was to make the inventory strategy more effective and after a phonecall with the head of the district, Jonnie Friberg, the planning started to try inventory in pictures taken from a helicopter. The pictures was at last taken from a digtal camera and the vegetationheight was mesured with a laser. The gear was supplied from Kallax Flyg AB, Luleå. In the trial 15 stands was selected depended on age and different mixtures between pine (Pinus sylvestris), spruce (Picea abies) and birch (Betula pubescense and Betula pendula).

På grund av ökad urbanisering och exploatering av grönområden i stadsnära miljöer fragmenteras och reduceras arters habitat vilket bland annat ligger till grund för den globalt minskade biologiska mångfalden. För att stärka och förbättra arters möjlighet till spridning i landskapet, och därmed säkra en hög biologisk mångfald, efterfrågas insamling av data och utveckling av nya metoder för att identifiera ekologiska kärnområden och för att analysera habitatnätverk. Syftet med den här studien är därför att 1) kartera och sammanställa biotoper i en biotopdatabas utifrån tolkning av infraröda flygbilder med digital stereofotogrammetri, 2) undersöka olika metoder att samla in data med hjälp av laser- och höjddata, och 3) att tillämpa landskapsekologisk analys på underlag i biotopkarteringen.Resultatet validerar att tolkning av infraröda flygbilder med digital stereofotogrammetri är en utmärkt källa för att kartera biotoper som medför en tolkningsnoggrannhet på 86 %. Valideringen av kateringen genomfördes med fältkontroller som utvärderades i felmatriser. En metod har även undersökts baserat på tidigare studier för att uppskatta busk- och krontäckning med hjälp av laserdata, men eftersom det saknas validering av resultatet bör den användas som en indikator för att visuellt uppskatta busk- och krontäckning i dagsläget.

Neoplasm 2.5D, is a project centered around exploring possibilities of combining various digital tools with the use of a lasercutter, to create intricate patterns withillusions of depth and texture, and to combine these studies into a working fullscale model that could be the basis for a future design product..

This study has the purpose of looking at the current and future position of record labels from a context involving the technological developments, while the opportunities for the artists are changing. As the actors inside them music industry find themselves in an ever changing climate where traditional supply chains are threatened by new technology, the record labels need to change the way they work in order to maintain their existence in the music industry. The study has been conducted by interviewing a number of people involved in the music industry, by using a qualitative method approach. The conclusion of the study shows that the traditional way of doing business by treating music as a product that makes revenue is gone. Instead the labels have to take on new roles formerly run by third parties in order to survive and be profitable, especially since artists can now in control of activities that used to be controlled by the record label..

Today there are many applications of digital terrain models (DTM) and the requirements of low uncertainty increases. Most of the DTM are produced with Global Navigation Satellite System (GNSS), terrestrial laser scanning (TLS), airborne laser scanning (ALS) and total stations. Guidelines for the preparation and verification of DTM are found in Swedish Standards Institute ? Technical Specifications (SIS-TS) 21144:2007 and SIS-TS 21145:2007. These were defined in collaboration between Swedish National Rail Administration, Banverket, and Swedish Road Administration, Vägverket, to satisfy the needs of requirement formulations in the production of DTM planning, design and construction. The purpose of this paper is to produce and control DTM over Åkermans kulle, located west of the University of Gävle, according to SIS TS 21144:2007 using GNSS with network-RTK, TLS and ALS.

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

This report is an outcome of a master degree project at Linköpings University in co-operation with Micronic Laser Systems AB. The purpose with this master degree project was to investigate how to implement a receiver in a data transfer system. The system consists of several data channels, where every channel consists of three parts: driver, transmission lines and receiver. The driver send low amplitude differential signals via the transmission lines to the receiver that amplifies and converts it to a single-ended signal. The receiver has to be fast and be able to feed an output signal with high voltage swing.

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

This thesis work is intended to analyze whether the municipalities has a need for the new technology of mobile mapping.Mobile mapping consists of the technologies of laser scanning, photographing and positioning of streets and roads in city environment and in the countryside. When these technologies are operating together a georeferenced three-dimensional image model is created, which has specific coordinates that states its position on the surface of the earth. Thanks to the laser scanning process even measuring can be performed in this model.The municipal sector consists of many different departments which use visual spatial information. These departments are an interesting target group for this system. Specific departments within the municipal sector, which we considered were the most suitable, have been selected.