ABSTRACTThis pilot study examines the knowledge about tree root systems amongst five treeplanting professionals. The aim is to find out the professionals? collective knowledge ofthe nature of root systems of various trees used in green areas. Furthermore; to explorehow the professionals adapt landscaped green areas to the tree root properties in asustainable manner. Questions: Which tree species have special root properties toconsider and how do the professionals utilize this knowledge? And: How do theprofessionals in general adjust planting according to the root systems of trees in areas tocreate sustainable green environments?Interviews with the professionals were performed.

In recent years, existing solutions for cooling personal computer CPUs have been supplemented by a new product category, factory sealed water cooling loops. These systems, consisting of a water block with an integrated pump, a fan and a radiator, perform well compared to the air cooling solutions but are less effective than larger, custom-built water cooling systems.This project aims to explore the most important aspects of a factory sealed system and to identify possible cost-effective enhancements of the performance.The most significant differences between the different groups of water cooling loops are the block design and the pumping power. The performance of both categories is also largely dependent on the fan power, but increasing fan power has a large negative impact on the noise level.Both radiator size and fan model choice appear, in tests, to be relatively unimportant, presuming that the noise level is kept constant. The position and direction of the fan, however, has significant impact on both the temperature and the sound level.Water blocks can be designed in several different ways, both regarding the heatsink design and the flow direction. In simulation, flow with the inlet centered above the heatsink result in considerably lower pressure drop and slightly higher temperatures than flow through the block, for heatsinks with fin arrays.Creating a competitive product in this product segment certainly seems possible, as there are performance-increasing changes to be made that seemingly has little impact on the production cost.

There exist several known methods for calculation of radio coverage for ground-based systems. As far as we know there are no equivalent methods for the case of flying platforms when the altitudes and speeds are significantly different to those of ground-based systems. This thesis describes the theoretical concepts behind calculations of radio coverage for flying platforms. An investigation is made to sort out what is important and possible to employ in a model for simulations. A method is described and implemented in a program for evaluation of flying radio systems.

AimThe aim of this study was to try to understand youngsters and their attitude to alcohol in the countryside and in a large city. The questions at issue have been: How do youngsters from the countryside, who drink, and do not drink alcohol, view the school- family- and friendsituation? How do youngsters from a large city, who drink, and do not drink alcohol, view the school- family- and friendsituation? Can we understand youths? attitude to alcohol on basis of the factors: School, family and friends? Are there any differences and similarities?MethodInterviews have been implemented with four youngsters in a large city and in the countryside. To gain as much as possible from the interviews a questionnaire was distributed to two classes in year nine in the countryside, and one class in the large city. The interview material was analysed on the basis from earlier research and two theoretical models.ResultsAccording to the youngsters that drink, both in the countryside and the large city, the most common view in school was that high demands are put on the youngsters and that they should study more then they do.

Companies that sell digital products such as software and movies transfer large amounts of data to its customers. In order to send this amount of data using FTP or HTTP and still maintain a high speed transfer rate it is required that the company have a large number of servers and a huge bandwidth. Servers and bandwidth costs money which means they have great costs on the distribution of their products. In order to reduce distribution costs, P2P technology can be used and the most powerful technology to transmit popular files is called BitTorrent.BitTorrent requires users to share their bandwidth. Nowadays, BitTorrent is frequently used to transfer products that are free of charge; one example is the Linux distribution Ubuntu.

The aim of this essay is to examine three separate Swedish public libraries and their respective websites on the grounds of the usability sciences. I firstly had to summarize the main properties of the usability-field in order to gain an extended knowledge of its purposes and possible usage for today?s library systems. I was then able to apply the extended knowledge in the examination of the three library websites and the purpose of determining whether or not they were designed according to the standards set by the usability-sciences.Usability is a rather new science that deals with the dissection and examination of computer-based systems, in order to find the key components that make systems user-friendlier. With user needs being the main focus of its research, usability tries to meet all the different needs of the modern user and construct systems that are less system-centered and more user-centered.

In healthcare there is a rapid development towards introducing and implementing a wide range of information technology (IT) to aim for higher quality and more effective care. A common health information system (Cambio Cosmic) has been implemented in Landstinget Kronoberg. Clinical microsystems are the frontline units where staff and pa-tient meet. When the conditions in the microsystems are changed, it is interesting to de-scribe and analyse the consequences.The purpose of this study is to describe how health care staff uses a health information sys-tem and how they experience its functionality in their patient work. Initially, a literature re-view about the use of health information system was undertaken, followed by a qualitative case study based on interviews about how healthcare staff describes their reality.

A good power quality can be an important prerequisite to achieve a sustainable society. Scandinavia's electrical system is in many respects superior, and Sweden has a fossil free electricity generation at 97 % and a reliability of electricity distribution at 99.98 %. Meanwhile, the EU has an ambition to expand the electricity market in order to achieve a joint trading business across Europe. This cross-border market will result in a large proportion of fossil energy sources integrated into our electrical system, which also leads to an increased need for renewable electricity production in Sweden. One part of this development is to increase the share of renewable micro generation that is locally or regionally connected to the power grid.

Optimization of soil tillage and crop rotation is important in many aspects, but particularly in maximizing profit margins. Since the economic outcome is usually decisive, it can be interesting to study different combinations of soil tillage systems and crop rotations in order to identify the maximum economic outcome. How a crop functions in a particular tillage system determines whether it is profitable to grow that crop. Different tillage systems affect the soil and its processes in different ways. Reduced tillage often works best on weak-structured heavy clays and on silty clays.

Previous research has, by studying large listed firms, identified cost reductions and knowledge transference as the primary reasons for outsourcing.  Previous research has also indicated that Business Process Outsourcing is likely to increase in popularity and experience high annual growth going forward. This study aims to explore why mid-sized and large firms decide to in Jämtlands län, fully or partly, outsource their finance/accounting activities. Theories regarding transaction cost economics and resource based view composes the foundation of this study and the information used has been gathered through the use of semi-structured interviews.  The results shows, like the chosen theories and previous research indicates, that the outsourcing decision is primary based on expected cost reductions.

AbstractThis report is made in cooperation with the municipality of Vasteras and technical committeestaff. The report addresses several topics that affect fuel stations in Vasteras. The reportcontains two parts, first is a inventory that review all stations in the area to be addressed. Theinventory is made with consideration to various things that geographic situation, whatcompanies are represented and what level of service stations have. And the second part of thereport, is done with the analysis of how it looks in daily situations review.

Energy-wise houses in Järinge - technical follow-up The company JM built energy-efficient houses in Tensta in Stockholm. They have built a total of 16 houses divided into two parts of A-houses and B-houses. The buildings are an attempt by JM to minimize energy-use of the buildings without affecting the comfort and living standards. The project aims to examine the data for the 16 houses on the basis of data and produce a report showing how the buildings worked through a technical perspective. JM approximates that the purchased energy will not be higher than 95 kWh/m2 per year.

The impact of computer programs in safety-critical systems has increased in the past decades and computer-based systems can now be found in a wide range of applications. A new approach for developing dependable systems is documenting all design rationale that affects safety using Intent Specifications. A recent approach for developing complex systems efficiently and in an upgradeable manner is Component-Based System Engineering. In this thesis, these approaches are combined in the development and upgrade of a Remote Robot Control Unit by using the tool SpecTRM. The case study showed that Intent Specifications and CBSE could successfully be combined.

This master thesis project will describe and evaluate the interfaces between applications and Controller Area Network, CAN, interface boards from different manufacturers. The interfaces have corresponding functions but the usage of parameters is different. The simply communication of sending and receiving messages is more alike than the supplementary functions between the different interfaces. The CAN communication is more controlled by the CAN protocol and is therefore more alike. The evaluation shows differences and similarities between different interfaces and also difficulties and options to translate them.

This bachelor thesis aims to analyse the effects of changes in management control systems following acquisitions, and deduce whether or not these effects are in line with the acquiring firm's objectives of the acquisition. Through a case study of technician consultant firm Energo, acquired in 2010 by ÅF, the study assumes the perspective of the acquired firm. Data has been collected through in-depth interviews at Energo and ÅF and complemented by internal documents to enrich and validate specific facts and statements. Data was then arranged and analysed through Otley and Fierriera's (2009) framework Performance Management Systems to understand how management control systems were constituted before the acquisition, what changes were made following the acquisition, how this process was accomplished and how it was experienced, in order to come to conclusions about the effects of these changes. The study concludes that the changes in Energo's management control system following the integration with ÅF, had significant effects on the outcome of the acquisition, primarily as it led to a high rate of Energo's employees resigning.