The connection between management control systems for controlling sustainability and a firm's motivation for engaging in sustainability is not completely understood (Arjaliès & Mundy, 2013). The aim of this thesis is to develop a more profound understanding for management control in achieving sustainable companies. To do this, we raise the question: How and to what extent do companies use management control systems to achieve sustainability compliance Simons's Levers of Control (1995) are applied to this question in order to get a consistent and thorough insight of management control systems. Hence, a case study of ABB:s work to achieve material compliance in accordance with EU-regulation was conducted. The findings of the case study reveal that ABB uses the regulations as explicit goals and implement them in sustainability procedures.

The trend in milk production is similar in Sweden and across the world; the farms are getting fewer but increasingly bigger. The costs for hiring workers are increasing, which results in more cows per animal keeper. Sensors can then be a great tool for keeping track of animals which need special attention. With a reported decreasing fertility, sensors that can detect oestrus even at low levels can be especially helpful in bigger herds to pinpoint the cows that may be in oestrus. The number of farms with dairy cows that install AMS, Automatic Milking Systems, are increasing, and that also increases the need for sensors to control milk quality and composition when there is no visual control of the milk by a milker before milking starts.For the sensor data to be useful you have to have software designed to analyze and interpret the data to get relevant information that the farmer can use.

This master thesis aims to investigate and quantify the potential associated with increasing the usage of edible by-products as food for human consumption on the Swedish market. The main emphasis is on the Swedish production of offal and the obstacles that currently inhibit greater usage of these products as foods.The results indicate that the Swedish market for offal is limited. Only a small amount of the edible by-products that are produced in Sweden every year are consumed as foods and a considerable amount seem to be downgraded into animal feed or thrown away. The utilization of these products is restricted by economical, technical, legal, and cultural factors that all need to be taken into consideration. On the whole, large-scale slaughter plants seem to be more inclined to utilize these products effectively, as the profit from doing so increases proportionately to the produced volumes.

The purpose of this master thesis is to, with the strategies of the organization and the preferences of the co-workers in mind, explore how reward systems can be designed in heterogeneous organizations. This is done by interviewing store managers and sales personnel in a heterogeneous organization. The frame of reference deals with theoretical approaches on reward systems and is divided in the following sections, individual or group based, differentiated or not differentiated rewards systems and goals, measurements and rewards. These sections are highlighted from the following aspects, equity, implementation possibilities and finally environment. The theoretical discussion ends in the conclusion that heterogeneous organizations should have several different reward systems, but not if a restructuring process is in progress or the system becomes too costly.

Energy efficiency is important both to reduce costs and to reduce greenhouse gas in the atmosphere. In Sweden 40 percent of the energy consumption is related to the buildings sector. Hospitals are complex buildings with different activities in the same building, which requires flexible technical systems for ventilation, heating and lightning. A quarter of the total energy consumption in Swedish hospitals is related to user activities in the hospitals. Therefore it is not only important to work with operational optimization but also to change user activities, to reduce energy consumption.The objective of this thesis was to examine the user-related energy efficiency work at two care units, at the central hospital in Sundsvall within Västernorrlands County.

This is a thesis performed at GEMS PET Systems AB in Uppsala. GEMS PET Systems AB is a company within GE Healthcare. GEMS PET Systems develops and manufactures equipment for manufacturing of radioactive isotopes for PET which is a scanner used in medical applications. The systems includes an accelerator of cyclotron type and other support equipment. One system is shipped in two or three containers depending on order configuration.

This Master?s Thesis aims to illustrate in what ways the two Swedish environmental assessment tools, the Environmental Load Profile and EcoEffect differ and if performed valuations gives different results and environmental goals.The built urban environment causes about half the environmental loading in Sweden. The society?s ambition towards sustainable development has resulted in demands reducing the environmental load. One way to accomplish this change is with the assistance of tools for environmental assessment of the built environment.

The industrialized timber housing process is capable nowadays to build multi-storeyhouses since fairly new changes in the Swedish regulations where made after theadmission of the European Union in 1994.The industrialized process moves parts of the construction process into a highlyeffective factory where 3D-volumes of the building are prefabricated beforetransportation to the building site for assemble.The assembly process is relatively effective compared to the completion of thebuilding service system and this is therefore the main focus in this thesis. This thesisattends problems with completion of the building service system, and thereforedemarcates from other aspects, such as technical and economic aspects, of thebuilding service system.The degree of completion of the flats differs from completion of the connectivepassages, for example hallways, in a way that suggests a need for further investigation.This thesis includes analysis of the possibilities to increase the prefabricatedconnective passages, to the extent of containing building service systems.An increase of the prefabrication of the building service system has a greatdevelopment potential, even though some restraining factors need to be solvedbefore implementation.This thesis was made in collaboration with two of Sweden?s leading companies on themarket of multi-storey industrialized timber housing, Moelven ByggModul AB andLindbäcks Bygg AB..

This study aims was to examine if working recreation instructors and the technical literature have the same or different outlook on when the grown ups should attend in children?s play, and what it is that separate them. The work method has been qualitative interviews. The number of interviewed recreation instructors is four. The study shows that the working recreation instructors that I have interviewed consider that it´s important to protect children´s freedom in there play without the grown up´s interference.

Swedish healthcare systems have endured harsh criticism from healthcare professionals because of their inability to understand healthcare processes. These systems have been identified as significant time consumers, and Swedish healthcare is therefore facing a major challenge to assure patient safety. The following paper is based on a workplace study, which aims to examine healthcare systems? impact on physicians? practices. Our findings show that physicians spend substantial amounts of time chasing information, rather than managing information and pursuing healthcare.

The Work has been performed to, and in cooperation with Vetlanda Energi och teknik AB.District heating for commercial purpose started in the USA in 1877. Today the network has grown into big and complex systems, which demand maintenance and service to keep up the security of the delivery. When a district heating network expand, it becomes difficult to perform reliable calculations. For this purposes there are a few suppliers who design and deliver systems for documentation and calculation of district heating networks.Vetlanda Energi och Teknik AB is in the position where they must get a system for documentation and calculation for district heating, and therefore they need a basis to get a system. The target is to write a requirement specification that will follow the basis.The Swedish market has been inventoried, and suitable systems have been selected.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

The Work has been performed to, and in cooperation with Vetlanda Energi och teknik AB.District heating for commercial purpose started in the USA in 1877. Today the network has grown into big and complex systems, which demand maintenance and service to keep up the security of the delivery. When a district heating network expand, it becomes difficult to perform reliable calculations. For this purposes there are a few suppliers who design and deliver systems for documentation and calculation of district heating networks.Vetlanda Energi och Teknik AB is in the position where they must get a system for documentation and calculation for district heating, and therefore they need a basis to get a system. The target is to write a requirement specification that will follow the basis.The Swedish market has been inventoried, and suitable systems have been selected.

The purpose with this study is to compare different systems of grain storage from a financial point of view. Grain that is supposed to be fed to laying hens. The systems that were compared were different airtight storage of grain and a system of conventional storage. To make this case study I choose to compare four different systems. In the case study there was one system with bin drying of the grain, two systems with airtight storage of the grain and one system where you buy dried grain during the season. I made several of capital investment appraisal where I found the cost of each system, then I took the cost and divided it with the total grain use and calculated the cost for each kilogram of grain, and also the cost of the feed. Then I compared the cost from my case study with the cost of buying feed. All the systems except for one, gave a lower cost for the hen feed than buying feed from a dealer The best system, witch were bin drying lower the cost with about 80 000:- SEK.

Simulation means running a model of a system with suitable input and observing the corresponding output. Real-time environment simulation is a special kind of simulation used to simulate a control system's environment in real-time. This is done to test the control system before it is used in its real environment. In this project, computer simulation of a certain kind of environments, called track-based systems, is studied and a general model for track-based systems is developed. In this model, track layouts are represented by graphs, which is a flexible and extensible representation and a method for visualizing these layouts is presented.