Our bachelor thesis is a visualisation made in 3D-graphics of how the horserace track in Tingsryd perhaps will look like in the future, complete with a miletrack, steeplechase, and other horserace courses. Today, the race track is only in it?s building phase. The inner field-group in Tingsryd needed presentation material to show their eventual sponsors, so they contacted us at Media Technology, and we instantly decided to give their idea a try..

Valmets own foundry in Karlstad has during a long period of time had problems being profitable. The goal today is to turn this around. Today there are three different productionlines; engine blocks, Yankeecylinders and components for the wind turbine industry. This master thesis has focused on examining if value stream mapping is a useful tool to use in a foundry, and therefore outside the typical manufacturing industry. The target has also been to evaluate if there is a possibility to improve the flow in the foundry and also the results.During the 20 weeks this work has been done at the foundry data has been collected and analyzed.

In the Maasai Mara National Reserve the native people, the Maasai, have lived for a long time following their own traditions. Their traditional lifestyle is that of a nomadic people, leading their cattle to the best grazing. Sharing their land with a large variation of different animals, one of them being the African Elephant (Loxodonta africana), the Maasi people have since long adapted to a life side by side with these giants, as well as the fierce predators living in the area.The aim of this study is to determine whether the Maasai settlement, known as Boma, has any impact on the elephants in the surrounding area. In order to conclude whether the bomas has an impact or not, observations of the wildlife were carried out. Observations were conducted in two different seasons, in December 2003 and May/June in 2004.

This study concerns mapping and analysing two different Supply Chains at Setra Group. Setra Group is Sweden?s biggest producer of solid wood and is primarily owned by Sveaskog, Mellanskog and LRF. The Company consist of twelve sawmills, five planning mills and an organisation for distribution of building material. This study maps one chain for Swedish Glulam standard beam and one chain for solid pine flooring on export to Japan. The glulam chain is based on spruce as raw material and includes all actors between sawmill and the Swedish building material retailers.

In June 2006 the Swedish government decided that the use of energy in buildings should be reduced by 20 percent until 2020, compared to the level of energy used in 1995. To contribute to this goal, the real estate company ?Eskilstuna Kommunfastigheter AB?, set up own goals for their buildings. In 2009, the goal for schools was to have a maximum energy use of 118 kWh/m2year for heating and hot water.The school ?Hållsta skola?, just south of Eskilstuna, exceeds the limit since it used 270 kWh in 2008.

This Master of Science thesis was a part of Pharmadule Emtungas project to construct a mobile automated cell for welding of carbon steel pipe (Heating, Ventilation and Sanitation). Pharmadule Emtunga is using a modular building concept for building pharmaceutical factories. The modules contain these pipes. The goal of the thesis was to present concepts for technical solutions regarding welding methods and fixtures for the cell. Conceptual models for the cell were made with aid of CAD software.

In the low-income countries of the world, rapid urbanization and decaying infrastructure results in an increasingly unsustainable situation when it comes to solid waste management. Often, the solution tends to focus on introducing technical advanced interventions based on the conditions of the high-income world. However, this thesis aims to ?nd site-speci?c solutions on solid waste management at a local scale. By taking in consideration of local conditions a customized approach is possible where the solution is not dependent on expensive structural changes.

AbstractThis report has been developed in cooperation with Peab Region Bostad Göteborg, mentor at Krook& Tjäder (through Chalmers), and examiner at Chalmers University of Technology. The report is the result of a research of a building project, constructed by Peab. The report is investigating and it means to identify and evaluate qualities in the dwelling and its surroundings. Its purpose is to evaluate how the residents in a chosen housing cooperative enjoy living there. It shall, with help of chosen quality aspects, identify what expectations the residents had before moving in, how they experience the dwelling and its surroundings today, and what hopes they have for the future planning of the area.

The purpose of this essay is to investigate how large Swedish corporations within the same industry protect themselves against foreign exchange risks and to determine if there is a general practice for how the protection is done. What is the responsibility structure at these corporations regarding the handling of exposure to foreign exchange?.

Program- och projekterings anatomi? en studie av byggprogrammets program- och projekteringsskedeStudien belyser och lyfter upp byggnadsprocessens, idag kanske viktigaste fråga, nämligen industrialiseringen av byggprocessen och de möjligheter som följer med det nya sättet att föra en byggprocess. Studien omfattar program- och projekteringsskedet och dess syfte är med andra ord ett försök att skapa en mer förädlad byggprocess, att kunna identifiera olika störningsmoment under dessa två skeden, samt att minimera och om möjligt eliminera störningsmomenten i dessa med hjälp av fungerande informationsteknik.I samarbete med Peab i Helsingborg har vi gjort en enkätundersökning på två referensobjekt, Polishuset samt Tingshuset, utifrån vilken vi tagit reda på vilken ställning de olika aktörerna har gentemot byggprocessen och varandra, samt var, varför och vilka störningsmoment som uppstod i byggprocessen.Resultatet visade närmast likadana faktorer hos de olika aktörerna och exempel på detta är att:? hälften av aktörerna önskar bli inkopplade i ett tidigare skede av processen? det uppstod störningsmoment mellan de olika aktörerna? störningsmomenten orsakades oftast av dålig planering och tidsbrist? utveckling/förbättring borde göras inom kommunikationen mellan parterna och inom informationsteknologinVidare beskriver studien utformningen av standardiserade byggsystem och tekniskt plattformstänkande samt montagebyggande med högförädlade komponenter, där vi kom fram att Peab har långsiktiga planer och att företaget inom en kort framtid kommer att vara ledande inom området.Studien sammanfattar slutligen de faktorer som tros behövas för att en industriell byggprocess skall lyckas i framtiden..

Höggeröd på nordöstra Orust är ett vackert fritidsområde med en tidstypisk karaktär från sextiotalet som är värd att bevara. Ett problem som uppstått på senare år är att husägarna vill flytta in permanent i sina fritidsstugor och bygga ut dessa till större och mer funktionella villor, men detta godkänner inte detaljplanen. Samtidigt finns en önskan om att kunna lösa detta ändå och göra alla delaktiga parter nöjda. Syftet med rapporten är att uppmana till en fördjupad diskussion om Höggeröds fritidshusområde och frågan om hur dessa skall utvecklas och samtidigt bevaras. Frågan om vilka krav och lagar som gäller kring ombyggnationer har även besvarats för att kunna göra ett så bra underlag som möjligt.För att kunna bevara detta kulturarv så kommer ett underlag till en bevarandeplan att tas fram med hjälp av den här rapporten.

This is the final documentation of the basis that can be the foundation of how to solve theproblem with leaking hydraulic oil in a shoe press at the company Albany InternationalAB in Halmstad, Sweden.The project has been performed at Halmstad University as a degree project commissionedby Albany International AB. The purpose of the degree project was to find a way ofdetecting the hydraulic leak of a shoe press. The reason is that the shoe press runsunattended during nights and weekends, this can cause an extensive decontaminationwork and production stop if leak. The hydraulic oil could be leaking in large amounts orslowly as a fine mist. The development of a working system that can detect a hydraulicoil leak and stop the machine before a large amount of hydraulic oil leaks out wouldconsiderably reduce the cost of the decontamination work.

This is a case study of the planning and building of a new IT education facility when thedepartment of Media Technologymoved its operation to Flemingsberg and the main campus, due tothe termination of Campus Haninge at Södertörn University, Stockholm, Sweden. The study isbased on a case study an on administrative material from the process such as emailscorrespondences, policy documents, contact reports etc. The material is analysed using qualitativecontent analysis and the different observations done are distilled into four recommendations,aimed at being able to contribute to a improved process in similar future situations, whereverneeded..

When building Large buildings, such as compartment buildings, there is a number of deliveries arriving on the construction site daily. In order to receive these deliveries without disturbing the rest of the work going on JM often books a fixed unloading time. When doing that they can be prepared when the delivery arrives. Making sure there is a suitable unloading area, someone to meet the delivery and when needed proper machines, such as a tractor or a crane, to help unload bigger deliveries. The person receiving the delivery is supposed to make an acceptance control where they check the delivered goods making sure nothing has been damaged in transport and that they have received what they were supposed to receive.

Abstract:This thesis work has been conducted at the Real Estate Department in Halmstad.The department consists of a construction/project management-unit and an operation/management-unit.Like many other towns in Sweden, Halmstad has had a long lasting problem with indoor environment. Not at least at their preschools.Today they are constructing from current building regulations. They have learned from negative experiences which have occurred in the indoor environment in older buildings.Focus is now on healthy materials, like low emission value, energy efficiency and optimization of the building, but still with soft parameters such as cleaning, interior and choice of materials.The fixtures is provides by the real estate department and the furnishings are provides by the children and youth administration. Together they are trying to provide a great indoor environment.I have, together with the real estate department and the children and youth administration of Halmstad, investigated how to provide a good indoor environment in the preschools with small funds.In my thesis there is one theoretical part with a questionnaire survey of how the preschool staff is experiencing their indoor environment to determine where the problems often start. And a practical part with measurements to try and come down to a result that analysis the cause of the problems and also to make sure that the ventilation systems are fulfilling projected values.The measurements and the questionnaire surveys was made at Lokes preschool in Frösakull, Askens preschool in Oskarström and Gullbrandstorps preschool.There were some differences between the staff-responses at the three different preschools.At Askens preschool they feel that the premises are cleaned poorly.At Gullbrandstorps preschool they feel that the indoor-air is bad because they can´t open the windows.