Bakgrund: Under hösten 2008 drabbades hela världen av en finanskris som hade sin grund på den amerikanska bostadsmarknaden. Några år tidigare hade IASB infört en ny standard för redovisning av rörelseförvärv som benämns IFRS 3. Denna standard behandlar goodwill som efter införandet numera ska skrivas ner istället för att skrivas av som den gjordes tidigare. Eftersom finanskrisen har varit väldigt omfattande är det många företag som har blivit lidande till följd av sämre resultat och bristande försäljning. Vi anser att det är intressant att undersöka huruvida företag som är under en lågkonjunktur väljer att redovisa sin goodwill eftersom det påverkar ett företags anseende utåt.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

Business valuation is something that is carried out on a daily basis and relevant to both small and large businesses. Valuations are often long and complex processes that may be difficult to understand, even for those who have received an education in the field. In this thesis, we try to create a better understanding of how this process works.   Since we are aware of many aspects of the theory behind business valuation, but very little insight into the practical activities, we have chosen a deductive approach, i.e. to go from theory to empirical data.   The conclusion is that the methods presented in the theory is largely used in practice, and that the process of valuation mighty seldom differ between valuations. For the seller to be able to charge a higher value for their companies, it is important to have knowledge of, and review the value-creating factors in the company.

This report describes an investigation of the indoor climate in two different workspaces. Since we a big part of our lives are staying indoors in artificial environments, and more particularly in our workplaces, we think it would be interesting to do this investigation. The technical solutions for air treatment systems began with simple natural systems without fans and where the thermal rise of the air applied. In modern time is technical air treating systems used to take care of the fresh air supply. This type of units can supply filtered air with the right temperature to the building. Well-functioning ventilation is essential to bring clean fresh air to the room and effectively remove impurities without sound- or draught problems. The indoor climate is relevant for the output capacity.

A common phenomena in descriptions of Western mission initiatives to the South is theoverrepresentation of depictions of the missionaries and underrepresentation of theindigenous people. It is fair to say that there is a need for new perspectives. This thesisinvestigates the agency of the indigenous people in the Scandinavian Pentecostal mission inTanganyika 1932-1945. It highlights roles and areas of their participation which seldomoccur in western mission biographies, but were tanganyikan people played a crucial part,such as evangelisation, church planting and the forming of contextualized theology. Thepentecostal theology and mission praxis contributed to a large degree to shape that agency..

Normally the operational amplifier is used as a component in active filter design. The goal for future components in filter design is large bandwith and the use of low supply voltages. The use of current-mode instead of voltage-mode circuits gets a step closer to the required performance. A component that use current as the signal conveying part is the current conveyor. In this report a comparative study between two current conveyor structures of second generation (CCII) is performed.

This report is about a couple of specially chosen peatlands in eastern Uppland, Sweden. It concerns their development between the year 1922 and 2012. The historic fact originates from a large investigation of peatlands in the south of Sweden made by the Swedish Geological Survey, SGU, in the 1920?s. To be able to choose peatlands an analysis in GIS were made, in which we were able to find locations good enough for our field investigation. During the field investigation we bore to find nice peat cores that later went through several analyses in a lab.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

A large proportion of businesses around the world is today ISO 9001 certified and is consequently conducting internal audits on a regular basis. It has however not been possible to conclude that internal audits always add value to the organisation, despite the large utilisation of this tool. Some authors, e.g. Alic & Rusjan (2010) and Wealleans (2000), mean that there are possibilities that internal audits may be used as a value-adding improvement tool. This has led to the emergence of this master?s thesis.The purpose of the case study was therefore formulated to examine how internal quality audits can be made more effective and used as an improvement tool.

The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

Nature conservation on certified small private forest owners- a comparison between the two certification systems FSC and PEFC in southern Sweden Today two different certification systems are used in Sweden to certify forest, FSC (Forest Stewardship Council) and PEFC (Pan European Forest Certification). During the last years certification of forests in general and different certification systems have frequently been debated. FSC is a globally widespread system and about 10 million ha out of 23 million ha Swedish forest is FSC-certified. The FSC-standard is mainly used by major forest companies and to some extent also by smaller private forest owners. PEFC is a European system and about 2 million ha Swedish forests is PEFC-certified today.

The background to this study is that the forest company, Holmen, has found large discrepancies between harvested volume and the measured volume at the industry. Factors like bark features, breakage, double tops, bends and stem damages was noted, and all stems were measured manually. Hypothesis testing with the method "random in pairs" were used to examine whether the harvester measured values significantly differed from the manually measured. The result of a properly calibrated harvester shows in average underestimation of the volume with Skogforsk Pine as a bark function. This means that the harvester isn´t the reason why the volume measured in the industry is lower, the fault is elsewhere. The study also indicates a need for a unique bark function for logepole pine..

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.