The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

Sweden became a member of the European Union in 1995. Consequently Sweden became obligated to implement the Working Time Directive 2003/88/EC (formerly termed 93/104/EC). At that time Sweden considered that their legislation already gave their employees as high level of protection as the directive prescribed. Instead they decided upon an adjustment of the collective agreements concerning working time. A particular EC-restriction was incorporated in the Working Hours Act (SFS 1982:673).

After the formation of the European Union internal market in 1992, member state specific obstacles and barriers were largely removed. This was especially the case in harmonised industries where standardisation and technical regulation have led to legal certainty. Despite this, a large range of trade regulation continues to remain distortional to trade, in addition to the ongoing tariffs and subsidies. The key trade regulations relate to a number of areas involving technical regulations such as production labelling and the protection of intellectual property rights. Whilst policy makers claim justification based around the need to correct market failure in delivering desired outcomes, the question is whether these regulations are appropriate responses to market failures or if they have simply been imposed in an attempt to protect domestic markets.

Föreliggande uppsats behandlar lönesättning på den svenska arbetsmarknaden. Lönesättningen i Sverige är inte i vidare utsträckning reglerad i lag. Grunden för lönesättningen är att det råder avtalsfrihet och att det är upp till arbetsmarknadens parter att genom kollektivavtal reglera området. Kollektivavtalen innehåller olika typer av reglering avseende arbetsgivarens lönesättning, exempelvis anges ofta minimilöner samt utrymme för lönehöjningar vid lönerevision. Avtalen innehåller dessutom oftast lönesättningsprinciper för hur löneutrymmet ska fördelas mellan enskilda arbetstagare.

The work aims to problemize and increase the understanding for the new labour market's flexible organising. By using Elias and Scotson's theory, the new organisational form of hiring doctors in healthcare will exemplify the developments taking place with many temporary jobs and how it affects the intrinsic structure of a work to be studied. The essay will focus on examining how the interaction affected between established nurses and new temporary doctors given the new form. How the interaction of the recently established group possesses a higher social-, economic- and cultural capital than the already established working group? The method is a qualitative study with three long and deep semi-structured interviews.

In this thesis we focus on the issue of crowdfunding and especially how a project relates to and embraces its community. While a lot of related research focus on what makes people give, our research instead delve into whether a creator looks upon the sponsors as something more than just a financial resource. To manage this task we used a triangular perspective consisting of a case study, a questionnaire and a netnographic study. The goal was to gain the perspectives of creators, crowdfunding platforms and sponsors on how the communication between the community and the project works and can be improved.       The three crowdfunding platforms we reviewed (Kickstarter, IndieGoGo, Rockethub) all had fairly similar models on how to attract sponsors and make them involved in the project, while the questionnaire and netnographic study demonstrated how a community could contribute in different ways.

This essay aims to investigate the affects of interaction between different professions ina municipal project. In the project, professional representatives from the social servicesand schools have collaborated with staff in preschool/school and exchanged knowledgeto improve the work around children with antisocial behavior. It is in this essaysambition to create an understanding of how professional practitioners, with a monopolyon certain knowledge, influences the possibilities and limitations of cooperation in amunicipal project. This is examined through six qualitative interviews with members ofan municipal project. By using theories about professionalization, social closure,alliance strategy and social control it is possible to understand how division intoprofessions creates opportunities and limitations of interaction exchange incollaborative projects.

I vår produktion har vi tagit fram ett system för order- och lagerhantering, med vikt på realtidsuppdateringar, åt en extern mottagare där infrastrukturen inte hängt med i företagets utveckling. Vi valde detta projekt i syfte att bredda våra kunskaper inom både programmering och projekthantering. Denna slutreflektion tar upp den förundersökning vi gjorde för att kunna besluta om vilka verktyg vi använde i utvecklingen, den tar även upp vårt sätt att hantera och planera projektet. Under projektet har vi arbetat med en egenutformad arbetsprocess vilken även beskrivs här. --- Our production has been to design a system for ordering and supply management with emphasis on realtime updates to an external recipient, where the infrastructure has not kept pace with the development of the company.

The aim of this project was to create an interior design for a children?s hospital patient room with the concept to adapt the room for the wide target group from 0-18 years of age. The analysis in the project is based on the hospital ward 322 at Drottning Silvias Children?s and Youth Hospital in Gothenburg. It?s an oncology ward where the children are very sensitive for infections and therefore need to be isolated in their rooms for 3-4 weeks.The main goal for the project was to create a room that works as a template and gives the people who lives in it the opportunity to create thier own room based on the personal things they bring into it, and how they decide to furnish and use the room.The result of the project is a template room with fixed furniture that can be transformed due to screens in the room.

The following report comprises my bachelor´s thesis in Industrial design, 30 hp. It is executed in collaboration with Bonum senior housing, who has been the client and assignment- maker of this project.The goal was to design a bench for their entrances, which could represent not only the needs of the target group but also Bonum as a trademark. The work is done with great care for both human kind and the environment, with sustainability as beacon.The design process has been followed.Initially, you will find the definition of a bench for entrances, the framework including inclusive as well as sustainable design, a function- and market analysis followed by the inspiration part of the project. Getting to know the target group and their specific needs has been essential for this work.Investigations about what senior house living and senior products are and what the target group thinks and feels, has been done. As a result, two ?personas? has been developed.With the help of a purposely chosen group of people, surveys and ergonomic studies has been executed, as well as prototype-testing.The fact-finding has formed the stable and unavoidable foundation of this project, which later on gets more creative and idea based.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

?Historiska Bakverk? is a project about different pastries from a historiacal perspective.The goal was to create illustrations and typography inspired by differentpastries, in order to communicate something about their history and what layunderneath. The project aimed to highlight, understand and acknowlage thepastries as an important part of our history and cultural heritage. Importantquestions I have dealt with throughout the project was in what way the pastriestell us about our history, how it has changed them through time. The result, aseries of posters for croissant, doughnut and pretzel, are a combination of boththeir history and my own experience of them.

According to our apprehension, work of integration is commonly considered managed in the main best through the labour market. Since this path is not available to everybody we wanted to find out how work of integration also can be practised in other areas. The purpose of this paper is to, with focus on children and youth, find out and analyze in what way the people working locally in residential areas and in associations, reflects around integration in general and within their own business, plus in what way they pursue local work of integration practically. The method we have used is qualitative, with unstructured, individual interviews. Our seven respondents within local authority, church and sport clubs, have told us about their work from a perspective of integration.

An important task for project managers in multi-project environments is to effectively choose the right people to the project team. For organizations, it means being able to prioritize and plan human resources among the various projects running in parallel. The purpose of this paper is to describe how a project manager in multi-project environments looks at the allocation of people in their projects. We did our research through literature reviews and interviews with seven project managers.The research shows that the studied organizations highlight both the expertise and the personal factors in an election. They do not use any specific personality test to identify their staff.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.