Within the field of welfare research, few people take into account both the aspect of gender and class. Thetraditional class-oriented research has a one-dimensional perspective on gender and the feminist welfare researchrarely carry out large comparative studies. A multi-dimensional perspective on the construction ofgender and class would benefit from both the feminist and class welfare-oriented research, and contribute toincreasing the knowledge about the individual's experience and attitudes to work and work time. The aim ofthis paper is to examine the correlation of the intersectional relationship between sex / gender position andclass position with the attitudes and motives for working time reduction. Especially in, (1) the value in work,and (2) the attitude to a high number of working hours, as well as (3) its combined effect on the conflict betweenwork and family.

This bachelor essay is divided into two parts, the first being a construction of a single-familyhouse and the second an in-depth study of five different isolation materials, analysed from anenergy perspective.The first part, the construction of the single-family house, has been created from knowledgeacquired during three years of studying at KTH Royal institute of Technology in Stockholm, inthe program Architecture and the Built Environment. The constructed house is a one-floorhouse of 137m2with façade plaster, situated in Borlänge, Sweden. The house has a wooden framewhich is built on a on sight cast concrete foundation, on the ground. The house?s roof is a gableroof, which has an angle of 24 degrees.

The low bearing capacity of roads during the spring thaw and periods in the autumn leads every year to increases costs for Holmen Skog. To reduce costs and increase accessibility Holmen Skog decided to install and test a CTI-system. Central tire inflation (CTI) is a system that makes it possible to monitor and vary a vehicle?s tire inflation pressures from the cabin, while the vehicle is in motion. When tire pressures are reduced, the area of the contact surface between the tire and the road increases, thus reducing the ground pressure. The purpose of this study was to evaluate the CTI-equipped vehicle and analyze if the CTI technology is economical defensible during the thaw 2005.

Management consulting firms are dependent on attracting and recruiting new talents since the human capital has a vital role in these types of organizations. In the following years a new generation, Generation Y, will to a large extent enter the labour market. According to several studies this generation has different characteristics than older generations.This thesis examines management consulting firms? views of Generation Y and which strategies they use to attract and retain the generation. The fact that the subjects are unexplored led the authors to conduct a qualitative study of seven management consulting firms through in-depth interviews.

Quality is the key to a well executed product or service. The construction industry hasn?t highlighted the quality in recent times which have contributed to the construction industry receiving much criticism in the field. The public sees it as an offhanded industry where errors and delays are common.The reason for this is considered to be primarily the lack of time, constant pressure to reduce costs and skills and the ability to communicate between the parties about what the correct quality really means. The industry has begun to realize that it must start setting clearer standards and that there are great opportunities for improvement.This report will give Peab an opportunity to develop their quality work.

Return handling is often regarded as a slow and complex process. Studies have shown that it is not unusual for a return to cost up to nine times as much as a standard outbound delivery. An efficient return handling process is therefore essential to all competitive companies dealing with logistics. This report investigates, analyzes and gives suggestions on development with the purpose to improve the return handling process at LensLogistics AB in Kista, north of Stockholm, Sweden. The study has been conducted from a deliberately practical point of view in order to suggest improvement suggestions possible to implement and thereby change the entire return handling process.

Everywhere you look in today?s society many kinds of people are constantly interacting with each other. Especially in large groups of people working together, the phenomenon is even greater. In the construction industry there are many kinds of parts that need to come together in order to get sustainable and successful results. Therefore the relationship between the contractor and the construction client must be at its best.

City of Malmö has ambitions for the district Hyllie to become a demonstrative area ofsustainable urban development. As a part of this the following report aims to investigate the potential in using noise barriers combined with photovoltaics along Annetorpsvägen to generate solar electricity. To quantify the losses that shadows from buildings along the roadmight cause, a 3D-model of the area was constructed in SketchUp. This digital model made it possible to simulate shadows and how they change over the year. A reference model of a photovoltaic noise barrier (PVNB) was constructed and used to find the dates on which the solar cells are shadowed depending on building heights and positioning of the barrier.The results show that two lengths with a total distance of 400 meters is appropriate for applying photovoltaic noise barriers.

Fast pyrolysis is a method for converting biomass into three energy rich products: char, gas and bio-oil, where the latter is most interesting.  Pyrolysis is an endothermic process where biomass is heated in an anaerobic environment and, with the right operating conditions, up to 80 %wt bio-oil can be extracted. Key parameters for fast pyrolysis are: stable reactor temperature (~500°C), short residue time for gas in the reactor (<2 s) and a very high heating rate for the biomass. Today there are several different process solutions for fast pyrolysis, where fluidized beds and rotating cones are most developed. Bio-oil has compared to fossil oil: lower heating value, low pH and also polymerizes with time. Because of this upgrading is desirable for increasing competitiveness.

In this report a study is carried out with the aim to identify added values of EPC projects implemented in schools in order to increase the interest of EPC projects on the market. The report examines how the planned maintenance, supervision, maintenance and corrective maintenance is affected, how insurance premiums and terms are affected, the indoor environment and how the tasks of the operating staff is changing. A literature study of energy savings, energy use in schools, maintenance and insurance as well as how energy efficiency improvements are related to the Swedish environmental objectives has been made. Visits were carried out in Ludvika, interviews were also carried out with operation technicians and local strategists in Ludvika as well as employees of insurance companies.Schools often have neglected maintenance and problems with ventilation and indoor environment. Schools also have a large energy saving potential due to their low utilization, mainly because they are empty parts of the year.

This study evaluates the retention of nitrogen and phosphorus in four newly constructed wetlands in the municipality of Falkenberg, Sweden. The four wetlands have been selected because they have been specifically constructed with the aim to reduce nitrogen and phosphorus in farming areas. The process of selecting the specific wetlands has been done in collaboration with the county administration in Halland. Through field studies in collaboration with the landowners where the wetlands are sited, the areas that provide the wetlands with water were determined. The size of these drainage areas were determined in a GIS computer program. The type of land use within the drainage areas was also determined.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

This thesis is based on thirteen qualitative interviews with civil servants and politicians. The purpose of the study is to research these informants? attitudes towards integration and their reflections about immigrants? lower chances in an ethnically segregated housing and labour market. The theoretical frame of references is based on social constructionism and focuses on including and excluding power structures. The empirical material provides both structural and cultural explanations to immigrants? problems as regards inclusion in Swedish society.

Syftet med uppsatsen är att analysera huruvida sfi (svenskundervisning för invandrare)-bransch har varit en lyckad socialpolitisk satsning från Linköpings kommuns sida. Med intervjuer som det största empiriska materialet behandlar uppsatsen ämnen som anses vara relevanta för eleven på sfi-bransch. Sfi-bransch framträder som en plats för lärdom men också som en del av en kedja av restriktioner som tillsammans motverkar syftet med sfi, det vill säga att berättiga sig ett arbete och i vidare mening integreras. Uppsatsen diskuterar även enheter som under studien framträtt som betydelsefulla för eleven, utifrån syftet med sfi. Med teoretisk utgångspunkt i Bourdieus symboliska kapital ger sig många intressanta aspekter inom sfi-utbildningen tillkänna..

Different techniques for precision agriculture have been available during the last decade. Some of them are more widely used than others. The main purpose of this thesis was to investigate the different attitudes to precision agriculture that exists among farmers and advisors in Sweden. Eight advisors and sixteen farmers were asked for their opinion of a number of specific techniques for precision agriculture, such as yield-mapping, precision liming, the Yara Nitrogen Sensor and site-specific fertilization with phosphorous and potassium. They were also asked to describe the way in which the counselling in Swedish agriculture is used and also about it's importance for the adaptation of new techniques. The high costs are mentioned to be one of the most important reasons why precision agriculture hasn't been more widely spread. Several farmers refer to their farms as too small to bear the costs that come with the techniques. The individual interest for technique among the potential users plays an important role.