The capacity to process and to remember information is a basic condition for language ability and for coming reading ability. Reading ability is strongly connected to phonological awareness, receptive vocabulary knowledge and working memory capacity. In what way hearing impairment in children affects development of cognitive skills and later on reading ability is an area that has attracted minor attention for research.The aim with this study was to investigate changes in cognitive skills and reading ability in children with mild or moderate hearing impairment after one year of progress and furthermore if any connections between any increases of the abilities were to be found. Comparisons were made with results from age adequate normal hearing children. Moreover prosodic ability on word-level was tested this year.

During this master thesis, wear and friction properties for the high-temperature alloy Kanthal APMT were studied. The results were also compared to 253MA. The initial tests showed, among other things, that the surface fineness of the muffle tubes matters in real applications like conveyor belts. A 253MA-sample wear-tested against a 253MA-tube showed lowest wear at 900°C while a pre-oxidized APMT-sample wear-tested against a APMT-tube had the lowest mean value of the friction force at 1100°C, compared to all other tests..

The aim of this study was to find possible relations between behaviour and physiology for puppies during different parts of a puppy test. This work deals mainly with the physiological part of the study. Thirtysix puppies, från five litters, were tested in a behaviour test where heart rate was measured and saliva samples were collected before and after each part in the test. Saliva and urine samples were analyzed for corisol concentration as an indicatior of stress. The tests were performed during two consecutive days in the breeders' home when the puppies were seven weeks old. In addition, heart rate and cortisol levels were also measured in the bitch since we were interested in finding out if there were any relations between physiological levels in bitches and puppies.

Purpose: The purposes of the current study were to investigate whether there were any differences in the perceptual ability between professional and non-professional ice-hockey players and whether professional players are better at distinguishing, paying attention to and concentrating on what is important during intense physical activity. Method: Twenty male ice-hockey players (10 from both the Swedish first and third divisions) participated in the study. Wingate test were used for physiological measurements while three psychological tests were presented in front of the participants. Stroop, Flanker and Fast counting tests were used to measure perceptual and coping abilities during intense physical activity and the differences between the two groups. Results: Fast counting and Flanker word 2 tests showed a significant difference between the two groups, whereby the professional groups was faster and more accurate than the non-professional group in answering.

This thesis describes a further development of an existing prototype named Automatic pin bone remover. The further development was requested from the Swedish consulting firm ATM AB. The request of automatic pin bone removers is high and has the potential to be a worldwide leading product.The goal with the thesis work is to further develop an existing prototype. In order to achieve the goal a pre-study of the prototype had to be made in order to define a customer demand specification. The thesis work is then continued by a function analysis which differs from a conservative one.

In this project, we are studying the material flow and the information flow of sample materials and the appurtenant report of deviation for the purpose to be able to suggest better solutions. The sample material, which is to be analysed, is to be continuously taken from the production flow. The purpose is to navigate the process by the results found by the analysis. Because of this, it's very important that both methods of analysis are ensured and that the sample material is representative for the production flow. However, even more importantly, is that activities and transportations, combined with both flows, must perform in a quick and correct way in order to maintain or improve Höganäs AB's competitive strength.According to reports are about 20 products per day not available, for loading, at the time of delivery.

Texture is an important soil property and accurate particle size analysis of soil texture is therefore crucial. There are a number of well-established and newly developed methods available for determining soil texture. In order to compare the results of these methods, the differences between them must be determined. The difficulties, problems and differences regarding texture class determination were examined through a study performed on forest soil samples. The study compared different methods (pipette, hydrometer and field methods) and two types of dispersing agents (sodium pyrophosphate and sodium hexametaphosphate (calgon)) commonly used for particle size analysis.

Lattelement AB in Ornskoldsvik is one of the leading companies in Sweden in composite elements in walls, floors and roofs in particular. The company supplies elements to buildings located with a wide geographical variation, which means that the products are subjected to very different climate with regard to snow, wind and humidity. This places high demands and requires the elements to withstand large variable loads.The elements are made of lightweight beams with flanges of structural timber and beam webs made of OSB. These are bound together by nogging pieces with the same kind of structure. On top of the beams a nailed and glued plywood is added to absorb compressive forces and on the underside of the element a sheet of steel is added for tensile absorption.These elements are then attached to the building framework in different ways depending on the particular element height, loads and the structual supporting material of the frame work.

The main topic of this thesis is to evaluate the impact on the usability of web pages when using responsive web design, a concept for developing web pages whose design adapts to the screen size being used. This is done by creating a responsive prototype based on an existing web site. A number of usability tests are conducted on the two versions of the site in order to compare the time to complete the tests and to observe the behaviour of the test participants. The tests are conducted on desktop as well as on mobile devices with varying screen size.The number of test participants was relatively low, and so the quantitative result is not statistically valid. However, the conclusion is that the most effective combination is to use either of the sites on desktop format.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

This thesis work is the last part of the Master of Science education inmechanical engineering at KTH, Stockholm.The aim of this project was the development of a Multi-zone modelfor NOxformation in Diesel engines. Because of the stringent emissionlegislations, great effort is made to decrease the fuel consumption and theharmful emissions of internal combustion engines. Computer simulationsplay a decisive role in this context because they substitute the expensiveand time-consuming Laboratory tests.The model is based on a multi-zone approach and uses the wellknownExtended Zeldovich Mechanism which gives a relation to calculatethe NO formation rate using the concentration of different gas speciesinvolved in the process.All the most important phenomena involved in the Diesel combustionhave been modelled. A special attention is then paid to the equilibriumconcentration calculation; this is a significant part of the model whichstrongly influences the following steps.A Simulink model has also been developed. This second version isbased on the previous model and it is made especially to allow theconnection with other external softwares, GT-power in this case.

This master of science thesis is focusing on how the fault handling on hardware connected toa control unit on a Scania vehicle is working. To the hardware counts buttons levers, sensorsand CAN. The work has been concentrated upon how the fault handling is working and if it ispossible to find any new fault modes.The control unit that has been studied is called the Coordinator and is the core in Scanias threenetworks of control units. The Coordinators work is to transmit messages between the threenetworks and to process signals from buttons, levers and sensors. The values is then usedinternally or is sent to other control units on the CAN networks.

Vårt syfte med denna forskning är att undersöka om det har funnits någon skillnad på Skolverkets syfte med det nationella provet i matematik och vad lärarna tycker är syftet. Vårt arbete är baserat på kvalitativa intervjuer med två matematiklärare på högstadiet och med en djupare undersökning av den forskning som finns att tillgå samt publikationer som Skolverket har tagit fram. Vi har även tittat på hur styrdokumenten ser ut och hur betygskriterierna är skrivna. Studien visar att syftet med det nationella provet enligt Skolverket inte alltid överensstämmer med läraren. Läraren tillskriver syften som inte Skolverket nämner..

Children with Reading and Writing Difficulties and Their Language and Cognitive AbilitiesA Comparison with Children with a Cochlear ImplantAbstractThe aim of this study was to examine the cognitive abilities that are important for reading in children with reading disabilities, children with a cochlear implantation and typically developed children. 64 children aged 10-12 years participated in the study. To answer the question at issue we used the following tests: Block Design from WISC III, PPVT III, TOWRE, SL 40 and a few chosen tests out of the SIPS battery. On tests of the lexical access children with reading disabilities performed at the same level as hearing children, while the children with a cochlear implant performed significantly lower. Test of the phonological and complex working memory showed that children with reading disabilities performed significantly higher than children with a cochlear implant, but at the same time lower than typically developed children on the test of phonological working memory.

The purpose of this project is to analyze and study the absorption of the substances ivermectin, spinosad and barettin to hydrophobic and hydrophilic surfaces, and to analyze and study if the barnacle larva are effected when they try to settle on the treated surface.Incubation tests with barnacle larva in Petri dishes were performed as well as absorption tests on hydrophobic and hydrophilic surfaces which were tested with ellipsometry. To determine the surface thickness.The barnacles were placed in hydrophobic as well as hydrophilic Petri dishes that had been incubated with ivermectin, spinosad or barettin. After four to six days the larva was counted to analyze the settling. From the results conclusions could be drawn about the adsorption abilities of the substances to the different surfaces.The barnacles were placed in hydrophobic as well as hydrophilic Petri dishes that had been incubated with ivermectin, spinosad or barettin. After four to six days the larva was counted to analyze the settling.